KC7050T-P2

SAW Clock Oscillators Surface Mount Type KC7050T-P2 Series LV-PECL/ 2.5V/ 7.0 × 5.0mm Features • Low voltage 2.5V • Low jitter • LV-PECL output • Operation at fundamental high frequency • ±50×10−6 Available How to Order KC7050T 312.500 P 2 0 E 00 ① ② ③④⑤⑥⑦ ① Type (7.0×5.0mm SMD) ② Output Frequency ③ Output Type (PECL) ④ Supply Voltage (2.5V) ⑤ Frequency Tolerance (See Table 1) ⑥ Symmetry/ Enable Function (45/ 55%, Stand-by) ⑦ Customer Special Model Suffix (STD Specification is “00”)   Packaging (Tape & Reel 1000 pcs./ reel) Table 1 Freq. Tol. Code × 10−6 0 ± 50 ±100 ±100 Operating Temperature Range (°C) Note Pb Free RoHS Compliant 1 A Standard specifications 0 to +70 With only certain −5 to +85 frequencies 0 to +70 Specifications Item Output Frequency Range Frequency Tolerance Storage Temperature Range Operating Temperature Range Max. Supply Voltage Supply Voltage Current Consumption (Standard Loaded) Symmetry Rise/ Fall Time (20% to 80% Output Level Standard Loaded) Low Level Output Voltage High Level Output Voltage Output Load (PECL) Input Voltage Range Low Level Input Voltage High Level Input Voltage Disable Time Enable Time Start-up Time Deterministic Jitter (DJ) 1 Sigma Jitter Peak to Peak Jitter Symbol fo f_tol T_stg T_use — VCC ICC SYM tr/ tf VOL VOH RL VIN VIL VIH t_dis t_ena t_str DJ JSigma JPK-PK 0 to +85°C/ Typ. 0.800V −5 to 0°C/ Typ. 0.805V 0 to +85°C/ Typ. 1.550V −5 to 0°C/ Typ. 1.495V PECL 50Ω @Terminated VCC−2V Conditions Initial tolerance, Operating temperature range, Rated Op. Temp.: 0 to +70°C power supply voltage change, Load change, Aging Op. Temp.: 0 to +70°C (1 year @25°C), Shock and vibration Op. Temp.: −5 to +85°C Standard Specifications 2.5V Min. 150 −50 −100 −100 −55 0 −0.5 2.375 — 45 — Max. 700 +50 +100 +100 +125 +70 +5 2.625 90 55 600 Units MHz ×10−6 °C °C V V mA % pS @Minimum operating voltage to be 0 sec. Measured with Wavecrest DTS-2079 VISI 6.3.1 VCC−1.810 VCC−1.405 VCC−1.830 VCC−1.305 VCC−1.025 VCC−0.740 VCC−1.085 VCC−0.880 49.5 50.5 0 VCC — 30% VCC 70% VCC — — 200 — 10 — 10 0.2 typ. 2 typ. 20 typ. V ohm V V V nS mS mS pS pS pS Note: All electrical characteristics are defined at the maximum load and operating temperature range. Please contact us for inquiry about operating temperature range, available frequencies and other conditions. Dimensions 7.00 0.2 #4 #5 1.40 #6 ① ② ③ ④ ⑤ ⑥ (Unit: mm) Recommended Land Pattern (Unit: mm) 5.00 0.2 KSS 5L 1.1 0.2 #3 2.54 #2 2.54 #1 1.10 2.80 250A1BA 350A1AA Pad Connections Enable/ Disable NC Case GND Output Complementary Output VCC Plating: Ni Au Enable/ Disable Function Pad1 Pad4/ Pad5 (Output) OPEN Active "H" Level Active "L" Level High Z (No-Oscillation) Note: A capacitor of value 0.01 F and 10 F between VCC and GND is recommended.