NES30-24

NES-SERIES DIN rail mountable type 30 ~ 240W Model name NES 120-24 Output voltage Series Output power Features DIN rail standard mounting: EN50022-35 7.5 or 35 15 Universal input: 85 ~ 265VAC continuous input voltage Harmonic correction: IEC1000-3-2 Connection capacity: Solid or standard/Conductor sizes 0.2 ~ 2.5 mm2/24 ~ 14AWG. Standard CE marking: Low Voltage Directive Safety: EN60950/UL1950/CAS950/UL508 (Low Voltage Directive) Specifications Model 1. Input voltage range 2. Input current harmonics 3. Nominal output voltage 4. Maximum output current 5. Maximum output power 6. Output voltage range 7. Input current (*1) 8. In-rush current (*2) 9. Max. Line Regulation 10. Max. Load Regulation 11. Over Current Protection 12. Over Voltage Protection 13. Hold-up time (typ) 14. Operating temperature 15. Cooling 16. Withstand voltage NES30-24 NES60-24 NES120-24 NES240-24 85 ~ 265VAC (47 ~ 63Hz) continuos input voltage NES120 & NES240: Complies with EN61000-3-2 Class A 24V 24V 24V 24V 1.38A 2.5A 5.0A 10.0A 33W 60W 120W 240W ±10% ±10% ±10% ±10% 0.75/0.42A 1.2/0.6A 1.6/0.8A 3.2/1.6A 15/30A 16/32A 25/50A 28/56A 60mV (from 85 ~ 132VAC or 170 ~ 265VAC, constant load) 120mV (from no load to full load, constant input voltage) 110% ~ (current limiting with automatic recovery) 115 ~ 135% (OVP circuit will shut down output , manual reset) 20ms 0 ~ +60°C (0 ~ 50°C: 100%, 60°C: 80%) Convection cooling Input–Chassis: 2.0kVAC, Input–Output: 3.0kVAC Output–Chassis: 500VAC for 1 minute each. 10 ~ 55 Hz amplitude (sweep 1 min.) Less than 2G X,Y,Z 1 hour each Less than 20G Approved by EN60950, UL1950, CSA950, UL508. Conforms to EN55022-B, FCC-B, VCCI-2. According to VDE0160 Conforms to IEC1000-4-2, -3, -4, -5, -6: Criteria A. NES240-28 NES240-48 28V 8.6A 240W ±10% 3.2/1.6A 28/56A 48V 5.0A 240W ±10% 3.2/1.6A 28/56A System Power Supply 17. Vibration (*3) 18. Shock 19. Safety 20. Conducted & radiated noise 21. Non-periodic over voltage 22. Input transient protection *1: At 100VAC/200VAC and rated output power. *2: At 100VAC/200VAC, Ta=25°C, cold start. *3: When mounting on DIN EN50022-35 7.5, EN55022-35 15 or when using the mounting screws. Connection capacity Solid or standard/Conductor sizes: 0.2 ~ 2.5mm2 /24 ~ 14AWG. Standard with ferrules with/without plastic collar. Mounting flexibility DIN Rail standard EN55022 35 7.5 or 35 15 Conventional mounting with mounting screws also available. 190 NES-SERIES NES30 (30W type) DIN rail mountable type 30 ~ 240W (Unit: mm) NES60 (60W type) System Power Supply (Unit: mm) 191 NES-SERIES NES120 (120W type) DIN rail mountable type 30 ~ 240W (Unit: mm) NES240 (240W type) System Power Supply (Unit: mm) 192