PR500-280

PR-SERIES Rectifier module 500W Model name PR 500-280 Name of series Nominal output Nominal output voltage power Features marking (Low Voltage Directive) Rectifier module AC filtering module used in AC front end of DC-DC module. Connect external filtering capacitor to output. Input 100V/200VAC Output voltage detecting signal (power-on signal) Power failure alarm signal during instant input Wide baseplate temperature: –20 ~ +85°C Conduction cooling 2 year warranty (Low Voltage Directive) Multigrades : 2 year warranty Power Module Specifications 01. Input voltage range 02. Rated output voltage 03. Max. output current/power 04. Efficiency (typ) 05. Input alarm signal 06. Power on signal 07. Auxiliary power 08. Cooling 09. Operating ambient temperature 10. Withstand voltage 11. Safety standard 85 ~ 132VAC/170 ~ 265VAC (47 ~ 440Hz) selectable 280VDC (230 ~ 370VDC) 85 ~ 132VAC: 2.1A 500W, 170 ~ 265VAC: 3.15A 750W 95%: 200VAC at full load Detection signal output when input 10mS or more is interrupted (ACF terminal) Signal output while output voltage is supplied (ENA terminal) Connect to control terminal of DC-DC converter module Auxiliary power output for external signal (AUX terminal: DC16 ~ 20V 10mA max.) Conduction cooling (Heatsink & airflow has to be chosen according to instruction manual) Baseplate temperature: –20 ~ +85°C (output derating is different according to condition) Ambient temperature: above –20°C Input/output terminal to baseplate: 3.0kVAC for 1 min. Approved by UL1950 , CSA950(C-UL) and EN60950(BSI) Product lineup Model PR500-280 Input voltage range 85 ~ 132VAC 170 ~ 265VAC Input current (typ) 8.8A (input at 100VAC) 6.6A (input at 200VAC) Nominal output voltage 280VDC (230 ~ 370VDC) Max. output current 2.10A (output at 240VDC) 3.15A (output at 240VDC) Max. output power 500W 750W : Safety standard approved UL CSA EN Request customer specification for further details of specifications, outline, characteristics, etc. Read the instruction manual before usage. Contact us about delivery before ordering. [Input 100VAC] R (in-rush current limiting resistor) [Input 200VAC] R (in-rush current limiting resistor) Outline drawings Block diagram For 100/200V input selection, connect center mode of C1 and C2 to AC(N) of PR500 connector. (C1, C2: cap for voltage doubler rectifier and filtering capacitor) (Unit: mm) Note 1: Model name, Input voltage range, Nominal output voltage, Maximum output current and country of manufacture are shown here. Note 2: Input & output terminal 4-ø2 6-ø0.6 110