LF-9MT024NV-EVN

 MT9M024 NanoVesta Head Board User’s Guide May 2012 Revision: EB63_01.1  MT9M024 NanoVesta Head Board User’s Guide Introduction The NanoVesta Head Board comprises a compact, low cost, high dynamic range (HDR) image sensor, lens and lens housing with adjustable focus, that can bolt directly onto the Lattice HDR-60 Base Board. Both the NanoVesta and HDR-60 boards have been designed to work together as part of the Lattice HDR-60 Video Camera Development Kit. The NanoVesta Head Board is designed to use the Aptina MT9M024 1/3-inch CMOS Digital Image Sensors which feature: • Superior low-light performance • HD video (720p60) • Selectable linear or high dynamic range capture • Selectable video or single frame modes • On-chip auto exposure and statistics engine • Parallel and serial output • Auto black level calibration • Context switching Read more about the image sensor specifications in the Aptina MT9M024 data sheet. Important: This document (including the schematics in Appendix A) describes the Lattice NanoVesta Head Board marked as Revision 2. This marking can be seen on the top layer silkscreen of the printed circuit board, below the outside perimeter of the lens holder. Features Key features of the NanoVesta Head Board include: • Aptina MT9M024 1/3-inch CMOS Digital Image Sensor • Lens: F/1.59,