L200CUV405-12D

LTR E REVISION 011706-RM04:ADD RADIANT INTENSITY DATE 01-18-06 APPD RM Features: 1. Chip material: InGaN / SiC 2. Emitted color : Ultraviolet 3. Lens Appearance : Water Clear 4. Low power consumption. 5. High efficiency. 6. Versatile mounting on P.C. board or panel. 7. Low current requirement. 8. 5mm diameter package 9. This product doesn't contain restricted substances, complies with ROHS standards. Packag e dimensions: 4.98 (.196) 8.7 (.342) 1.0 (.04) 5.9 (.232) 1.5(.059) MAX. 25.4 (1.0) MIN. 0.5 (.02) SQ. TYP. Cathode FLAT DENOTES CATHODE 1.0 (.04) MIN. 2.54(.10) NOM. Applications: 1. TV sets 2. Monitor 3 Telephones 4. Computer 5. Circuit board Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25mm (0.01") unless otherwise specified. 3. Lead spacing is measured where the leads emerge from the package 4. Specifications are subject to change without notice. ! CAUTION This UV LED during operation radiates intense UV light. Do not look directly into the UV light during operation of device. This can be harmful to the eyes even for brief period due to the intense UV light. If viewing the UV light is necessary, please use UV filtered glasses to avoid damage by the UV light. If the UV LED in your product might be viewed directly, please affix a caution label to your product to that effect. Avoid direct eye exposure to UV light. Keep out of reach of children. Absolute maximum ratings(Ta=25°C) Parameter Power Dissipation Forward Current Peak Forward Current* Reverse Voltage Operating Temperature Storage Temperature Soldering Temperature Symbol Pd I F Rating 120 30 150 5 -40°C~80°C -40°C~80°C 260°C (for 5 seconds) Unit mW mA mA V °C °C °C I FP VR Topr T stg T sol * Condition for Ifp is pulse of 1/10 duty and 0.1msec width. -PROPRIETARYR This document contains Proprietary TM information of LEDTRONICS, INC. It may not be copied, used or disclosed for any purpose without the prior express written consent of LEDTRONICS, INC. TM TITLE DWG NO DSDC0274 CODE IDENT NO. 8Z410 DWG BY RM L200CUV405-12D SCALE NTS CHK BY PL 01-23-06 QA GZ 01-23-06 SHEET 1 OF 2 MFG DATE 09-26-01 CUSTOMER TM 23105 KASHIWA COURT TORRANCE, CA 90505 .XXX ± .010 .XX ± .025 ANGLES ± 0°,30' FRACT. ± 1/32 TOLERANCE PER ANSI-Y14.5 (UNLESS OTHERWISE STATED) Electrical and optical characteristics(Ta=25°C) Parameter Forward Voltage Luminous Intensity Radiant intensity Symbol V Iv Condition IF =20mA I F =20mA I F =20mA Min. 400 - Typ 3.5 55 48000 405 0.171 0.006 26 15 Max. 4.0 100 410 - Unit V mcd uW/sr Reverse Current Peak Wavelength Dominant Wavelength Chromaticity Coordinates Spectral Line Half-width Viewing Angle IR p d X Y 2θ 1/2 VR =5V IF =20mA IF =20mA IF =20mA IF =20mA IF =20mA IF =20mA uA nm nm nm deg -PROPRIETARYR This document contains Proprietary information of LEDTRONICS, INC.TM It may not be copied, used or disclosed for any purpose without the prior express TM written consent of LEDTRONICS, INC. TM TITLE L200CUV405-12D SPECTRAL CURVES SCALE 1:1 CHK BY QA SHEET 2 OF 2 MNFG DATE 10-06-05 CUSTOMER DWG NO DSDC0274-A CODE IDENT NO. 8Z410 DWG BY RM .XXX ± .010 23105 KASHIWA COURT TORRANCE, CA 90505 .XX ± .025 ANGLES ± 0°,30' FRACT. ± 1/32 TOLERANCE PER ANSI-Y14.5 (UNLESS OTHERWISE STATED) Reliability Summary: MB UV 120 Light Output (Rf) 5 4 Vf Forward Voltage (Vf) HTOL 20 mA DC 100°C 85% RH Au-Plated Header 100 80 Rf 60 40 20 0 0 24 168 Hours 504 1008 3 2 0 24 168 Hours 504 1008 RTOL 30 mA DC 25°C Pkg: TO-39 Au-Plated Header 120 100 80 Rf Light Output (Rf) 5 4 Vf Forward Voltage (Vf) 60 40 20 0 0 24 168 Hours 504 1008 3 2 0 24 168 Hours 504 1008 120 Light Output (Rf) 5 4 Vf Forward Voltage (Vf) WHTOL 10 mA DC 85°C 85% RH 100 80 Rf 60 40 0 3 2 Pkg: TO-39 Au-Plated Header 20 0 24 168 Hours 504 1008 0 24 168 Hours 504 1008 120 Light Output (Rf) 5 4 Vf Forward Voltage (Vf) LTOL 20 mA DC -40°C Pkg: TO-39 Au-Plated Header 100 80 Rf 60 40 20 0 0 24 168 Hours 504 1008 3 2 0 24 168 Hours 504 1008 R ULTRAVIOLET LED RELIABILITY MB UV: Chips C395-MB290, C405-MB290 1 OF 1 TM QA0042 JAG 05-23-06 23105 KASHIWA COURT TORRANCE, CA 90505 LTR RELEASED REVISION DATE 03-10-00 APPD JCH ULTRAVIOLET LIGHT SAFETY PROCEDURE INSPECTORS AND OTHER PERSONS VIEWING ULTRAVIOLET LIGHT MUST WEAR PROPER PROTECTIVE EYEWEAR WILLSON UV GLASSES PART # F117501 ! CAUTION This UV LED during operation radiates intense UV light. Do not look directly into the UV light during operation of device. This can be harmful to the eyes even for brief period due to the intense UV light. If viewing the UV light is necessary, please use UV filtered glasses to avoid damage by the UV light. If the UV LED in your product might be viewed directly, please affix a caution label to your product to that effect. NORMAL SUNGLASSES WILL NOT PROTECT YOU FROM UV LIGHT DAMAGE. YOU MUST USE THE APPROVED UV GLASSES Avoid direct eye exposure to UV light. Keep out of reach of children. ONLY THOSE PERSONS WHO HAVE COMPLETED UV TESTING CERTIFICATION ARE TO VIEW THIS PRODUCT THE SAFETY OF ALL EMPLOYEES IS THE UTMOST CONCERN OF LEDTRONICS  -PROPRIETARYThis document contains Proprietary TM LEDTRONICS, INC. information of It may not be copied, used or disclosed for any purpose without the prior express TM LEDTRONICS, INC. written consent of .XXX ± .010 TOLERANCE PER ANSI-Y14.5 (UNLESS OTHERWISE STATED) TITLE UV LIGHT TESTING INSTRUCTIONS DWG NO QA0028 CODE IDENT NO. 8Z410 DWG BY JCH SCALE NTS CHK BY QA CG 08-09-00 SHEET 1 OF 1 MFG RA 12-01-00 DATE 03-10-00 CUSTOMER 23105 KASHIWA COURT TORRANCE, CA 90505 .XX ± .025 ANGLES ± 0°,30' FRACT. ± 1/32