HAS500-S

Current Transducer HAS 50 .. 600-S For the electronic measurement of currents: DC, AC, pulsed, mixed, with a galvanic isolation between the primary circuit (high power) and the secondary circuit (electronic circuit). IPN = 50 .. 600 A VOUT = ± 4 V Electrical data Primary nominal current rms IPN (A) 50 100 200 300 400 500 600 Primary current, measuring range 5) IPM (A) ± ± ± ± ± ± ± 150 300 600 900 900 900 900 Type RoHS since date code Features HAS HAS HAS HAS HAS HAS HAS 50-S 100-S 200-S 300-S 400-S 500-S 600-S 45217 45325 45166 45326 45333 45201 45260 • Hall effect measuring principle • Galvanic isolation between primary • Isolation voltage 3000 V~ • Low power consumption • Extended measuring range (3 x IPN) • Insulated plastic case made of polycarbonate PBT recognized according to UL 94-V0 and secondary circuit VC IC ÎP Vd Vb RIS VOUT ROUT RL Supply voltage (± 5 %) 5) Current consumption Overload capability Rms voltage for AC isolation test, 50 Hz, 1 min Rated isolation voltage rms, safe separation Isolation resistance @ 500 VDC Output voltage (Analog)@ ± IPN, RL = 10 kΩ, TA = 25°C Output internal resistance approx. Load resistance 6) ± 15 ± 15 30,000 3 5001) > 1000 ± 4V ± 40 100 >1 V mA At kV V MΩ mV Ω kΩ Advantages • Easy mounting • Small size and space saving • Only one design for wide current • High immunity to external interference. ratings range Accuracy - Dynamic performance data X ε L VOE VOH TCVOE TCVOUT tr di/dt BW Accuracy @ IPN, TA = 25°C (without offset) Linearity error 2) (0 .. ± IPN) Electrical offset voltage, TA = 25°C Hysteresis offset voltage @ IP = 0; after an excursion of 1 x IPN Temperature coefficient of VOE HAS 50-S HAS 100..600-S Temperature coefficient of VOUT (% of reading) Response time to 90% of IP step di/dt accurately followed Frequency bandwidth (- 3 dB) 3)