L3URF9Q53S-TR1

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PLCC TYPE RED LED Pb Lead-Free Parts L3URF9Q53S/TR1 DATA SHEET DOC. NO REV. DATE : QW0905-L3URF9Q53S/TR1 :A : 29 - Sep. - 2009 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L3URF9Q53S/TR1 Page 1/7 Package Dimensions 5.4 5.0 PIN NO.1 1 2 3 6 5 4 5.0 1.0 0.7 1.0 0.7 1.0 0.8 1.95 2.5 URFS 1 URFS 2 URFS 3 4 6 5 1.0 1.0 1.Aonde Red 2.Aonde Red 3.Aonde Red 4.Cathode Red 5.Cathode Red 6.Cathode Red Note : 1.All dimension are in millimeter tolerance is ± 0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. Carrier Type Dimensions 8.0¡ Ó 0.2 1.75 4.0±0.2 2.0 1.5 0.3 5.5±0.2 12.0±0.3 5.6 5.2 2.15 Note : The tolerances unless mentioned is ±0.1mm,Angle ± 0.5. Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L3URF9Q53S/TR1 Page 2/7 Reel Dimensions 330± 1.5 6.0±1.0 13.5± 1.0 ψ13.0±0.5 17.5±1.0 Part No. L3URF9Q53S/TR1 Description 12.0mm tape,13"reel Quantity/Reel 4000 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L3URF9Q53S/TR1 Page 3/7 Absolute Maximum Ratings at Ta=25 ℃ Ratings Parameter Symbol URF(S) Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V Electrostatic Discharge( * ) Operating Temperature Storage Temperature IF IFP PD Ir ESD Topr Tstg 50 90 120 10 2000 -40 ~ +85 -40 ~ +100 mA mA mW UNIT μA V ℃ ℃ Static Electricity or power surge will the Use of anti-electrosatic * glove is recommended when handingdamageLED.LED.devices, a conductive wrist band or must be properly these All equipment and machinery grounded. Typical Electrical & Optical Characteristics (Ta=25 ℃) PART NO MATERIAL COLOR Emitted Lens Water Clear Dominant wave length λDnm Spectral halfwidth △λnm Forward voltage @20mA(V) Min. Max. 2.6 Luminous intensity @20mA(mcd) Viewing angle 2θ 1/2 (deg) Min. 320 Typ. 500 120 L3URF9Q53S/TR1 AlGaInP Red 625 20 1.7 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L3URF9Q53S/TR1 Page 4/7 Typical Electro-Optical Characteristics Curve URFS CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Luminous Intensity vs. Forward Current Forward Current(mA) 150 6.0 Luminous Intensity Normalize @20mA 5.0 4.0 3.0 2.0 1.0 0.0 0 50 100 150 100 50 0 0 0.5 1.0 1.5 2.0 2.5 3.0 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature Forward Current(mA) Fig.4 Luminous Intensity vs. Temperature Luminous Intensity@20mA Normalize @25 ℃ Forward Voltage@20mA Normalize @25 ℃ 1.06 1.04 1.02 1.00 0.98 0.96 0.94 -40 -20 0 20 40 60 80 100 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -40 -20 0 20 40 60 80 100 Ambient Temperature( ℃) Ambient Temperature(℃) Fig.5 Relative Intensity vs. Wavelength Relative Intensity@20mA 1.0 0.5 0 550 600 650 700 Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L3URF9Q53S/TR1 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. Page 5/7 2. Wave Solder Soldering heat Max. 260 ℃ 245±5℃ within 5 sec Preheat 120 ~ 150℃ 120 ~ 180 sec 3. LEAD Reflow Solder Temp. (℃) 240 Rising +5 ℃/sec Cooling -5℃/sec 150 120 Preheat 60 ~ 120 sec 5sec Time 4. PB-Free Reflow Solder 1~5¢XC/sec 260¢XC MaX. 10sec.Max Preheat 180~200¢XC 1~5¢XC/sec Above 220¢XC 60 sec.Max. 120 sec.Max. Note: 1.Wave solder and reflow soldering should not be made more than one time. 2.You can just only select one of the soldering conditions as above. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L3URF9Q53S/TR1 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH