L8UG9S53

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT TAPE AND REEL Pb Lead-Free Parts L8UG9S53/TR1 DATA SHEET DOC. NO REV. DATE : QW0905-L8UG9S53/TR1 :B : 18 - Sep. - 2008 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L8UG9S53/TR1 Page 1/7 Package Dimensions 3.0 1.3 1.4 2.0 2.7 1.3 0.7 0.7 Carrier Type Dimensions 4.0 1.75 2.0 4.0 1.5 0.25 3.5 5.3 Polarity 8.0±0.3 3.44 1.53 Note : The tolerances unless mentioned is ± 0.2mm,Angle ± 0.5. Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L8UG9S53/TR1 Page 2/7 Reel Dimensions 2.0± 0.5 178±1.5 0 .8 0 .6 0 .4 0 .2 6.0±1.0 0 .4 ψ13.5±1.0 Part No. L8UG9S53/TR1 Description 8.0mm tape,7"reel 0 .2 0 .6 0 .8 9.0± 1.0 12.0±1.0 Quantity/Reel 2000 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L8UG9S53/TR1 Page 3/7 Absolute Maximum Ratings at Ta=25 ℃ Ratings Parameter Symbol 8UG Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V Electrostatic Discharge( * ) Operating Temperature Storage Temperature IF IFP PD Ir ESD Topr Tstg 25 75 65 10 2000 -40 ~ +85 -40 ~ +100 mA mA mW UNIT μA V ℃ ℃ Static Electricity or power surge will the Use of anti-electrosatic * glove is recommended when handingdamageLED.LED.devices, a conductive wrist band or must be properly these All equipment and machinery grounded. Typical Electrical & Optical Characteristics (Ta=25 ℃) PART NO COLOR MATERIAL Dominant wave length λDnm Spectral halfwidth △λnm Luminous Forward Viewing intensity voltage angle @20mA(V) @20mA(mcd) 2θ 1/2 (deg) Emitted L8UG9S53/TR1 Lens Water Clear Min. Max. Min. 574 20 1.7 2.6 20 Typ. 50 130 AlGaInP Green Note : 1.The forward voltage data did not including ± 0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L8UG9S53/TR1 Page 4/7 Typical Electro-Optical Characteristics Curve 8UG CHIP Fig.1 Forward current vs. Forward Voltage 60 Fig.2 Relative Intensity vs. Forward Current 2.0 Forward Current(mA) 50 40 30 20 10 0 0 0.5 1.0 1.5 2.0 2.5 3.0 Relative Intensity Normalize @20mA 1.0 0 1.0 10 100 1000 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature Forward Current(mA) Fig.4 Relative Intensity vs. Temperature 1.2 1.1 1.0 0.9 0.8 -20 0 20 40 60 80 Relative Intensity @20mA Normalize @25℃ Forward Voltage@20mA Normaliz @25℃ 2.5 2.0 1.5 1.0 0.5 0 -20 0 20 40 60 80 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength Relative Intensity @20mA 1.0 0.5 0 500 550 600 650 Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L8UG9S53/TR1 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. Page 5/7 2. Wave Solder Soldering heat Max. 260 ℃ 245±5℃ within 5 sec Preheat 120 ~ 150℃ 120 ~ 180 sec 3. LEAD Reflow Solder Temp. (℃) 240 Rising +5℃/sec Cooling -5 ℃/sec 150 120 Preheat 60 ~ 120 sec 5sec Time 4. PB-Free Reflow Solder 1~5¢XC/sec 260¢XC MaX. 10sec.Max 1~5¢XC/sec Preheat 180~200¢XC Above 220¢XC 60 sec.Max. 120 sec.Max. Note: 1.Wave solder and reflow soldering should not be made more than one time. 2.You can just only select one of the soldering conditions as above. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L8UG9S53/TR1 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH