L9UG9753-S4

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SUPER BRIGHT AXIAL SERIES LED LAMPS L9UG9753/S4 DATA SHEET DOC. NO REV DATE : QW0905-L9UG9753/S4 : A : 27 - Oct. - 2007 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L9UG9753/S4 Page 1/6 Package Dimensions 177.8 1.1 17.9 0.55 37.6 1 2 1 2 1 2 1 2 14.7 1.25 1.1 0.55 1 4.0±0.2 12.7 2 1 2 Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. Directivity Radiation 0° -30° 30° -60° 60° 100% 75% 50% 25% 0 25% 50% 75% 100% LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L9UG9753/S4 Page 2/6 Absolute Maximum Ratings at Ta=25 ℃ Ratings Parameter Symbol 9UG Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V Electrostatic Discharge( * ) Operating Temperature Storage Temperature IF IFP PD Ir ESD Topr Tstg 30 60 75 10 2000 -40 ~ +85 -40 ~ +100 mA mA mW UNIT μA V ℃ ℃ Static Electricity or power surge will the Use of anti-electrosatic * glove is recommended when handingdamageLED.LED.devices, a conductive wrist band or must be properly these All equipment and machinery grounded. Typical Electrical & Optical Characteristics (Ta=25 ℃) COLOR PART NO MATERIAL Emitted L9UG9753/S4 Forward Dominant Spectral voltage wave halfwidth @20mA(V) length △λ nm λDnm Luminous intensity @20mA(mcd) Viewing angle 2 θ 1/2 (deg) Lens Water Clear Min. Max. Min. Typ. 574 20 3.4 5.2 65 120 60 AlGaInP Green Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L9UG9753/S4 Page 3/6 Typical Electro-Optical Characteristics Curve 9UG CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 1000 3.0 Forward Current(mA) 100 Relative Intensity Normalize @20mA 1.0 2.5 2.0 1.5 1.0 0.5 0 10 1.0 0.1 2.0 3.0 4.0 5.0 1.0 10 100 1000 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature Forward Current(mA) Fig.4 Relative Intensity vs. Temperature Relative Intensity @20mA Normalize @25℃ -40 -20 0 20 40 60 80 100 Forward Voltage@20mA Normaliz @25℃ 1.2 3.0 2.5 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 80 100 1.1 1.0 0.9 0.8 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength Relative Intensity @20mA 1.0 0.5 0 500 550 600 650 Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L9UG9753/S4 Soldering Iron: Basic spec is ≦5 sec when 260℃. If temperature is higher, time should be shorter(+10 ℃ → -1sec). Power dissipation of iron should be smaller than 15W,and temperature should be controllable. Surface temperature of the device should be under 230 ℃. Page 4/6 Soldering heat Soldering heat Max. 260 ℃ 245±5℃ within 5 sec Preheat 120 ~ 150 ℃ 120 ~ 180 sec Reflow Temp/Time Temp. (℃) 220 Rising +5 ℃/sec Cooling -5℃/sec 150 120 Preheat 60 ~ 120 sec 5sec Time LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L9UG9753/S4 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH