LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
SURFACE MOUNT TAPE AND REEL
Pb
Lead-Free Parts
LDGL9353/TR1
DATA SHEET
DOC. NO REV DATE
: :
QW0905-LDGL9353/TR1 A
: 19 - Nov. - 2007
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LDGL9353/TR1 Page 1/7
Package Dimensions
4.6
0.5±0.1
0.4± 0.1 2.2
3.0
1.5 0.65 0.12±0.07 0.26
0.15
Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice.
4±0.2
2.16 3.32
9.3 12±0.3
Polarity
Cathode
2.0
4.0±0.2
+
4.85 5.5±0.2 1.75 1.5 0.3
-
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. : LDGL9353/TR1 Page 2/7
Reel Dimensions
16.0±1.0
ψ178±2.0
14.2±1.0
74.0±1.5
Part No. LDGL9353/TR1
Description 12.0mm tape,7"reel
Quantity/Reel 1500 devices
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. : LDGL9353/TR1
Page 3/7
Absolute Maximum Ratings at Ta=25 ℃
Ratings Parameter Symbol DGL Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V Electrostatic Discharge( * ) Operating Temperature Storage Temperature IF IFP PD Ir ESD Topr Tstg 30 100 120 50 150 -20 ~ +80 -30 ~ +100 mA mA mW UNIT
μA V ℃ ℃
Static Electricity or power surge will the Use of anti-electrosatic * glove is recommended when handingdamageLED.LED.devices, a conductive wrist band or must be properly these All equipment and machinery grounded.
Typical Electrical & Optical Characteristics (Ta=25 ℃)
PART NO
MATERIAL Emitted
COLOR
Forward Dominant Spectral voltage wave halfwidth @20mA(V) length △λ nm λD nm
Luminous intensity
@ 20mA(mcd)
Viewing angle 2θ 1/2 (deg)
Lens 505 32
Typ. Max. Min. Typ. 3.5 4.0 300 450 120
LDGL9353/TR1
InGaN/GaN Green Water Clear
Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. : LDGL9353/TR1
Page 4/7
Typical Electro-Optical Characteristics Curve
DGL CHIP
Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current
1000
3.0
Forward Current(mA)
100
Relative Intensity Normalize @20mA
1.0 2.0 3.0 4.0 5.0
2.5 2.0 1.5 1.0 0.5 0.0 1.0 10 100 1000
10
1.0
0.1
Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature
1.2
Forward Current(mA) Fig.4 Relative Intensity vs. Temperature
3.0
Forward Voltage@20mA Normalize @25℃
Relative Intensity@20mA Normalize @25℃
1.1
2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100
1.0
0.9 0.8 -40 -20 0 20 40 60 80 100
Ambient Temperature( ℃)
Ambient Temperature( ℃)
Fig.5 Relative Intensity vs. Wavelength
Fig.6 Directivity Radiation
0°
Relative Intensity@20mA
1.0
-30°
30°
0.5
-60°
60°
0.0 450
500
550
600
100% 75% 50%
25%
0
25% 50% 75% 100%
Wavelength (nm)
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LDGL9353/TR1 Recommended Soldering Conditions 1. Hand Solder
Basic spec is ≦ 280℃ 3 sec one time only.
Page5/7
2. Wave Solder
Soldering heat Max. 260 ℃ 245± 5℃ within 5 sec Preheat
120 ~ 150 ℃
120 ~ 180 sec
3. LEAD Reflow Solder
Temp. (℃) 240
Rising +5 ℃/sec Cooling -5℃/sec
150 120
Preheat
60 ~ 120 sec
5sec
Time
4. PB-Free Reflow Solder
1~5 ° C/sec 260 ° C MaX. 10sec.Max
1~5 ° C/sec
Preheat 180~200 ° C
Above 220 ° C 60 sec.Max.
120 sec.Max.
Note: 1.Wave solder and reflow soldering should not be made more than one time. 2.You can just only select one of the soldering conditions as above.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LDGL9353/TR1 Page 6/7
Precautions For Use: Storage time:
1.The operation of Temperatures and RH are : 5 ℃~35℃,RH
很抱歉,暂时无法提供与“LDGL9353-TR1”相匹配的价格&库存,您可以联系我们找货
免费人工找货