LPT9033-TR1

Pb Lead-Free Parts NPN SILICON PHOTOTRANSISTOR LED LAMPS LPT9033/TR1 Package Dimension SERIES Page:1/3 4.6±0.5 2.5 Collector A0 0.5±0.1 2.0 K0 0.4±0.1 ψ1.9 W1 F E P2 P P0 W B0 1.4 2.8 0.16 0.7 1 1.EMITTER 2.COLLECTOR Note:1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted 2.Specifications are subject to change without notice t D0 Collector 2 0.4 •MAXIMUM RATINGS(Ta=25℃) PARAMETER Power Dissipation Collector-Emitter Voltage Emitter-Collector Voltage Operating Temperature Storage Temperature Lead Soldering Temperature(1.6mm From Body) MAXIMUM RATINGS 100 30 5 -50℃ TO +100℃ -50℃ TO +100℃ 260℃ for 5 seconds UNIT mw V V •ELECTRICAL CHARACTERISTICS(Ta=25℃) PARAMETER Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector-Emitter Saturation Voltage Rise Time Fall Time Collector Dark Current On State Collector Current SYMBOL V(BR)CEO V(BR)ECO VCE(sat) Tr Tf ICEO Ip(on) 1 2 4 8 DOC. NO : QW0905-LPT9033/TR1 REV. : D 5 5 100 2 4 8 Min. 30 5 0.4 Typ. Max. UNIT V V V TEST CONDITION Ic=1mA Ee=0mw/c㎡ IE=100μA Ee=0mw/c㎡ Ic=0.5mA Ee=20mw/c㎡ VCE =30V IC=800μA,RL=1K Ω VCE =10V Ee=0mw/c㎡ VCE =5v Ee=1mw/c㎡ λP=940nm DATE : 04 - Aug - 2005 μs μs nA mA mA mA mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only NPN SILICON PHOTOTRANSISTOR LED LAMPS LPT9033/TR1 Page:2/3 •Dimensions Symbol Information Compartment Length Width Depth Pitch Symbol Ao Bo Ko P Dimension 2.16 4.85 3.32 4.0 Tol. Centers Line Symbol P2 F Symbol Do Po E Dimension 2.0 5.5 Dimension 1.5 4.0 1.75 Tol. ±0.2 Length Direction ±0.2 Width Direction ±0.2 Sprocket Hole ±0.2 ±0.2 Tol. ±0.2 Diameter Pitch Distance ±0.2 ±0.2 ±0.2 Carrier Tape Width Thickness Symbol W t Dimension 12 0.3 Tol. ±0.3 ±0.2 Width Thickness Fixing Tape Symbol W1 Dimension 9.3 0.1 Tol. ±0.2 max •Configuration Of Reel And Flange Flange Diameter Space Between Flanges Key Slit Width Hub Diameter Symbol A T Symbol B Dimension 178 16 Dimension 20 Tol. +0 -2 Note:dimension in mm T ±1 Tol. B CA TRAILER ±1.5 Hub Symbol Dimension Tol. LEADER Spindle Hole C 12.5 ±1 FIXING TAPE •Ordering Information Part No. LPT9033/TR1 Description 12mm tape,7"reel Quantity/Reel 1500 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LPT9033/TR1 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. Page 3/3 2. Wave Solder Soldering heat Max. 260 ℃ 245± 5℃ within 5 sec Preheat 120 ~ 150℃ 120 ~ 180 sec 3-1. LEAD Reflow Solder Temp. (℃) 240 Rising +5 ℃/sec Cooling -5℃/sec 150 120 Preheat 60 ~ 120 sec 5sec Time 3-2 PB-Free Reflow Solder 1~5° C/sec 260° C MaX. 10sec.Max Preheat 180~200° C 1~5° C/sec Above 220° C 60 sec.Max. 120 sec.Max. Reflow Soldering should not be done more than two times.