LRGB9553-2-TR1

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT LED TAPE AND REEL Pb Lead-Free Parts LRGB9553-2/TR1 DATA SHEET DOC. NO REV. DATE : : QW0905-LRGB9553-2/TR1 B : 30 - Dec. - 2007 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553-2/TR1 Page 1/9 Package Dimensions 3.5 3.2 0.7 ±0.05 1.95 2.6 3R 4G B2 1 0.7 ±0.05 2.8 2.2 0.7 ±0.05 0.7 ±0.05 0.6 1.95 1.05 Common Anode 1 1.5 0.9 0.9 BRG Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. 2 3 4 1.Common Anode 2.Cathode Blue 3.Cathode Red 4.Cathode Green Carrier Type Dimensions 4.0 ±0.2 2.0 1.55 0.23 1.75 5.5 ±0.2 12.0 ±0.3 9.3 4.06 4.0 ±0.5 3.12 2.24 Note : The tolerances unless mentioned is ±0.2mm, Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553-2/TR1 Page 2/9 Reel Dimensions 16.0 ±1.0 ψ178 ±2.0 14.2 ±1.0 74.0 ±1.5 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553-2/TR1 Page 3/9 Absolute Maximum Ratings at Ta=25 ℃ Absolute Maximum Ratings Parameter Symbol HRF Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V Electrostatic Discharge Operating Temperature Storage Temperature Soldering Temperature IF IFP PD Ir ESD Topr Tstg Tsol 30 90 75 10 2000 DGL 30 100 120 50 150 -20 ~ +80 -30 ~ +100 Max 260 ℃ for 5 sec Max DBK 30 100 120 50 150 mA mA mW UNIT μA V ℃ ℃ Typical Electrical & Optical Characteristics (Ta=25 ℃) Dominant wave length λDnm Spectral halfwidth △λnm PART NO MATERIAL Emitted AlGaInP Red COLOR Lens Forward voltage @20mA(V) Luminous Viewing intensity angle @20mA(mcd) 2θ 1/2 (deg) Min. Typ. Max. Min. Typ. 630 20 32 30 1.5 ---- 2.4 ---- 3.5 4.0 ---- 3.5 4.0 65 160 90 150 350 160 120 120 120 LRGB9553-2/TR1 InGaN/GaN Green InGaN/GaN Blue Water Clear 505 470 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ± 15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553-2/TR1 Page 4/9 Typical Electro-Optical Characteristics Curve HRF CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 1000 3.5 Forward Current(mA) 100 Relative Intensity Normalize @20mA 2.0 2.5 3.0 3.0 2.5 2.0 1.5 1.0 0.5 0 10 1.0 0.1 1.0 1.5 1.0 10 100 1000 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature 1.2 Forward Current(mA) Fig.4 Relative Intensity vs. Temperature 3.0 Forward Voltage@20mA Normalize @25℃ Relative Intensity@20mA Normalize@25℃ -40 -20 -0 20 40 60 80 100 2.5 2.0 1.5 1.0 0.5 0 -40 -20 -0 20 40 60 80 100 1.1 1.0 0.9 0.8 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength Fig.6 Directive Radiation Relative Intensity@20mA 1.0 0° -30° 30 ° 0.5 -60 ° 60 ° 0 550 600 650 700 100% 75% 50% 25% 0 25% 50% 75% 100% Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553-2/TR1 Page 5/9 Typical Electro-Optical Characteristics Curve DGL CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 1000 3.0 Forward Current(mA) 100 Relative Intensity Normalize @20mA 1.0 2.0 3.0 4.0 5.0 2.5 2.0 1.5 1.0 0.5 0.0 1.0 10 100 1000 10 1.0 0.1 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature 1.2 Forward Current(mA) Fig.4 Relative Intensity vs. Temperature 3.0 Forward Voltage@20mA Normalize @25℃ Relative Intensity@20mA Normalize @25℃ -40 -20 0 20 40 60 80 100 1.1 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 1.0 0.9 0.8 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.6 Directive Radiation Relative Intensity@20mA 1.0 0° -30° 30 ° 0.5 -60° 60 ° 0.0 450 100% 75% 50% 25% 0 25% 50% 75% 100% 500 550 600 Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553-2/TR1 Page 6/9 Typical Electro-Optical Characteristics Curve DBK CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 1000 Forward Current(mA) 100 10 1 01 1.0 2.0 3.0 4.0 5.0 Relative Intensity Normalize @20mA 2.5 2.0 1.5 1.0 0.5 0.0 1 10 100 1000 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature Forward Current(mA) Fig.4 Relative Intensity vs. Temperature Forward Voltage@20mA Normalize @25℃ Relative Intensity@20mA Normalize @25℃ -40 -20 0 20 40 60 80 100 1.2 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 1.1 1.0 0.9 0.8 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength Fig.6 Directive Radiation 0° Relative Intensity@20mA 1.0 -30 ° 30 ° -60° 0.5 60° 0.0 400 450 500 550 100% 75% 50% 25% 0 25% 50% 75% 100% Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553-2/TR1 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. Page 7/9 2. Wave Solder Soldering heat Max. 260 ℃ 245±5℃ within 5 sec 120 ~ 150 ℃ Preheat 120 ~ 180 sec 3. LEAD Reflow Solder Temp. (℃) 240 Rising +5 ℃/sec Cooling -5℃/sec 150 120 Preheat 60 ~ 120 sec 5sec Time 4. PB-Free Reflow Solder 1~5 ° C/sec 260 ° C MaX. 10sec.Max 1~5 ° C/sec Preheat 180~200 ° C Above 220 ° C 60 sec.Max. 120 sec.Max. Note: 1.Wave solder and reflow soldering should not be made more than one time. 2.You can just only select one of the soldering conditions as above. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553-2/TR1 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH