LRGB9553-S2-TR1

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT LED TAPE AND REEL Pb Lead-Free Parts LRGB9553/S2/TR1 DATA SHEET DOC. NO REV. DATE : : QW0905-LRGB9553/S2/TR1 B : 21 - Dec. - 2007 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553/S2/TR1 Page 1/10 Features: *. P-LCC-4 package. *. White package. *. Silicon package. *. Optical indicator. *. Colorless clear window. *. Ideal for backlight and light pipe application. *. Inter reflector. *. Low (5mA) current operation. *. Wide viewing angle. *. Suitable for vapor-phase reflow,Inflow and wave solder processes. *. Computable with automatic placement equipment.. *. Available on tape and reel(9mm Tape). Descriptions: *.The LRGB9553 series is available in soft orange,red,green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light xoupling by inter reflector. This feature makes the SMT TOP LED ideal for light pipe application.The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications: *. Automotive:backlighting in dashboard and switch *. Telecommunication:indicator and backlighting in telephone and fax. *. Flat backlight for LCD's, switches and symbols. *. Light pipe application. *. General use. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553/S2/TR1 Page 2/10 Package Dimensions 3.5 3.2 0.7±0.05 0.7±0.05 1.95 2.6 3 4 B G R 2 1 0.7±0.05 2.8 0.7±0.05 0.6 1.95 2.2 1.05 1.5 0.9 0.9 Common Anode 4 + RGB Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. 1 2 3 1.Cathode Red 2.Cathode Green 3.Cathode Blue 4.Common Anode Carrier Type Dimensions 4.0±0.2 2.0 1.55 0.23 1.75 5.5±0.2 12.0±0.3 9.3 4.06 4.0±0.5 3.12 2.24 Note : The tolerances unless mentioned is ± 0.2mm, Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553/S2/TR1 Page 3/10 Reel Dimensions 16.0±1.0 ψ178±2.0 14.2±1.0 74.0±1.5 Part No. LRGB9553/S2/TR1 Description 12.0mm tape,7"reel Quantity/Reel 1500 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553/S2/TR1 Page 4/10 Absolute Maximum Ratings at Ta=25 ℃ Absolute Maximum Ratings Parameter Symbol URH Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V Electrostatic Discharge Operating Temperature Storage Temperature IF IFP PD Ir ESD Topr Tstg 50 100 130 10 2000 DGM 30 100 120 50 1000 -20 ~ +80 -30 ~ +100 DBK 30 100 120 50 1000 mA mA mW UNIT μA V ℃ ℃ Typical Electrical & Optical Characteristics (Ta=25 ℃) Peak Dominant wave wave length length λPnm λDnm Spectral halfwidth △λnm PART NO MATERIAL COLOR Emitted Lens Forward voltage @5mA(V) Luminous Viewing intensity angle @5mA(mcd) 2 θ 1/2 (deg) Min. Typ. Max. Min. Typ. --630 525 470 20 36 30 1.7 ---- 2.6 ---- 3.0 3.5 32 80 80 160 30 120 120 120 AlGaInP/GaP Red LRGB9553/S2/TR1 InGaN/GaN Green InGaN/GaN Blue Water Clear 518 --- ---- 3.0 3.5 12.5 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553/S2/TR1 Page5/10 Typical Electro-Optical Characteristics Curve UR(H) CHIP Fig.1 Forward current vs. Forward Voltage 1000 Fig.2 Relative Intensity vs. Forward Current 3.5 Forward Current(mA) 100 10 Relative Intensity Normalize @20mA 1.0 2.0 2.5 3.0 3.0 2.5 2.0 1.5 1.0 0.5 0.0 1 01 1.5 1 10 100 1000 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature 1.2 Forward Current(mA) Fig.4 Relative Intensity vs. Temperature Forward Voltage@20mA Normalize @25℃ Relative Intensity@20mA Normalize @25℃ -40 -20 0 20 40 60 80 100 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 1.1 1.0 0.9 0.8 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength Fig.6 Directive Radiation Relative Intensity@20mA 1.0 0° -30° 30° 0.5 -60° 60 ° 0.0 550 600 650 700 100% 75% 50% 25% 0 25% 50% 75% 100% Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553/S2/TR1 Page6/10 Typical Electro-Optical Characteristics Curve DGM CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 1000 3.0 Forward Current(mA) 100 Relative Intensity Normalize @20mA 2.5 2.0 1.5 1.0 0.5 0.0 10 1.0 0.1 1.0 2.0 3.0 4.0 5.0 1.0 10 100 1000 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature 1.2 Forward Current(mA) Fig.4 Relative Intensity vs. Temperature 3.0 Forward Voltage@20mA Normalize @25℃ Relative Intensity@20mA Normalize @25℃ -40 -20 0 20 40 60 80 100 1.1 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 1.0 0.9 0.8 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength 1.0 Fig.6 Directive Radiation 0° -30 ° 30 ° Relative Intensity@20mA 0.5 -60° 60° 0.0 450 500 550 600 100% 75% 50% 25% 0 25% 50% 75% 100% Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553/S2/TR1 Page 7/10 Typical Electro-Optical Characteristics Curve DBK CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Forward Current(mA) 1000 100 10 1 01 1.0 2.0 3.0 4.0 5.0 Relative Intensity Normalize @20mA 2.5 2.0 1.5 1.0 0.5 0.0 1 10 100 1000 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature Forward Current(mA) Fig.4 Relative Intensity vs. Temperature Forward Voltage@20mA Normalize @25℃ Relative Intensity@20mA Normalize @25℃ -40 -20 0 20 40 60 80 100 1.2 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 1.1 1.0 0.9 0.8 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.6 Directive Radiation Fig.5 Relative Intensity vs. Wavelength 0° Relative Intensity@20mA 1.0 -30° 30 ° -60 ° 0.5 60 ° 0.0 400 450 500 550 100% 75% 50% 25% 0 25% 50% 75% 100% Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553/S2/TR1 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. Page 8/10 2. Wave Solder Soldering heat Max. 260 ℃ 245±5℃ within 5 sec Preheat 120 ~ 150 ℃ 120 ~ 180 sec 3. LEAD Reflow Solder Temp. (℃) 240 Rising +5 ℃/sec Cooling -5℃/sec 150 120 Preheat 60 ~ 120 sec 5sec Time 4. PB-Free Reflow Solder 1~5 ° C/sec 260 ° C MaX. 10sec.Max 1~5 ° C/sec Preheat 180~200 ° C Above 220 ° C 60 sec.Max. 120 sec.Max. Note: 1.Wave solder and reflow soldering should not be made more than one time. 2.You can just only select one of the soldering conditions as above. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553/S2/TR1 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH