LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT LED TAPE AND REEL
LRGB9553-SB/TR1
DATA SHEET
DOC. NO REV. DATE
: :
QW0905-LRGB9553-SB/TR1 B
: 13 - Sep - 2005
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LRGB9553-SB/TR1 Page 1/9
Package Dimensions
3.5 3.1 0.7¡ Ó 0.05 0.7¡ Ó 0.05 1.85 3.0
3 4
B
G R
2 1
0.7¡ Ó 0.05 2.8 0.7¡ Ó 0.05 0.6 1.85 2.2
0.95 1.3 0.8 0.8
Common Anode
4
RGB
Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice.
1
2
3
1.Cathode Red 2.Cathode Green 3.Cathode Blue 4.Common Anode
Carrier Type Dimensions
4.0¡ Ó 0.2
2.0
1.55
0.23
1.75
5.5±0.2 12.0¡ Ó 0.3 9.3 4.06
4.0¡ Ó 0.5
3.12
2.24
Note : The tolerances unless mentioned is ±0.2mm,Angle ± 0.5. Unit=mm.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LRGB9553-SB/TR1 Page 2/9
Reel Dimensions
16.0±1.0
ψ178±2.0
14.2±1.0
74.0±1.5
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LRGB9553-SB/TR1 Page 3/9
Absolute Maximum Ratings at Ta=25 ℃
Absolute Maximum Ratings Parameter Symbol UE Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V Electrostatic Discharge Operating Temperature Storage Temperature Soldering Temperature IF IFP PD Ir ESD Topr Tstg Tsol 50 90 120 10 2000 DGM 30 100 120 50 150 -20 ~ +80 -30 ~ +100 Max 260 ℃ for 5 sec Max DBK 30 100 120 50 150 mA mA mW UNIT
μA V ℃ ℃
Typical Electrical & Optical Characteristics (Ta=25 ℃)
Dominant wave length λDnm Spectral halfwidth △λnm Forward voltage @20mA(V)
Luminous Viewing intensity angle @20mA(mcd) 2θ 1/2 (deg)
PART NO
MATERIAL
COLOR
Emitted Lens
Min. Typ. Max. Min. 620 518 470 17 36 30 1.7 ---------- 2.6 200
Typ. 350 320 125 120 120 120
AlGaInP
LRGB9553-SB/TR1
Orange
InGaN/GaN Green Water Clear InGaN/GaN Blue
3.5 4.0 125 3.5 4.0 50
Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LRGB9553-SB/TR1 Page4/9
Typical Electro-Optical Characteristics Curve
UE CHIP
Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current
1000
3.0
Forward Current(mA)
Relative Intensity Normalize @20mA
2.5 2.0 1.5 1.0 0.5 0
100
10
1.0 0.1 1.0 2.0 3.0 4.0 5.0
1.0
10
100
1000
Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature
Forward Current(mA) Fig.4 Relative Intensity vs. Temperature
Relative Intensity @20mA Normalize @25 ℃
Forward Voltage@20mA Normaliz @25 ℃
1.2
3.0 2.5 2.0 1.5 1.0 0.5 0 -40
1.1 1.0 0.9
0.8 -40 -20 0 20 40 60 80 100
-20
0
20
40
60
80
100
Ambient Temperature( ℃)
Ambient Temperature( ℃)
Fig.5 Relative Intensity vs. Wavelength
1.0
Fig.6 Directive Radiation
0° -30 ° 30°
Relative Intensity @20mA
0.5
-60 °
60 °
0 550 600 650 700
-90 °
75% 50%
25%
0
25% 50% 75% 100%
90°
Wavelength (nm)
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LRGB9553-SB/TR1 Page 5/9
Typical Electro-Optical Characteristics Curve
DGM CHIP
Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current
1000
3.0
Forward Current(mA)
100
Relative Intensity Normalize @20mA
1.0 2.0 3.0 4.0 5.0
2.5 2.0 1.5 1.0 0.5 0.0 1.0 10 100 1000
10
1.0
0.1
Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature
1.2
Forward Current(mA) Fig.4 Relative Intensity vs. Temperature
3.0
Forward Voltage@20mA Normalize @25 ℃
Relative Intensity@20mA Normalize @25 ℃
-40 -20 0 20 40 60 80 100
1.1
2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100
1.0
0.9 0.8
Ambient Temperature( ℃)
Ambient Temperature(℃)
Fig.5 Relative Intensity vs. Wavelength
1.0
Fig.6 Directive Radiation
0° -30 ° 30°
Relative Intensity@20mA
0.5
-60°
60°
0.0 450 500 550 600
-90 °
75% 50%
25%
0
25% 50% 75% 100%
90 °
Wavelength (nm)
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LRGB9553-SB/TR1 Page 6/9
Typical Electro-Optical Characteristics Curve
DBK CHIP
Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current
3.0
1000
Forward Current(mA)
100 10 1 01 1.0 2.0 3.0 4.0 5.0
Relative Intensity Normalize @20mA
2.5 2.0 1.5 1.0 0.5 0.0 1 10 100 1000
Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature
Forward Current(mA) Fig.4 Relative Intensity vs. Temperature
Forward Voltage@20mA Normalize @25 ℃
Relative Intensity@20mA Normalize @25℃
-40 -20 0 20 40 60 80 100
1.2
3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100
1.1 1.0
0.9
0.8
Ambient Temperature( ℃)
Ambient Temperature( ℃)
Fig.5 Relative Intensity vs. Wavelength
Fig.6 Directive Radiation
0°
Relative Intensity@20mA
1.0
-30°
30°
0.5
-60°
60 °
0.0 400 450 500 550
-90°
90 °
75% 50% 25% 0 25% 50% 75% 100%
Wavelength (nm)
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LRGB9553-SB/TR1 Soldering Iron:
Basic spec is ≦5 sec when 260 ℃. If temperature is higher, time should be shorter(+10 ℃ → -1sec). Power dissipation of iron should be smaller than 15W,and temperature should be controllable. Surface temperature of the device should be under 230 ℃.
Page 7/9
Soldering heat
Soldering heat Max. 260 ℃ 245± 5℃ within 5 sec Preheat
120 ~ 150℃
120 ~ 180 sec
Reflow Temp/Time
Temp. (℃) 220
Rising +5℃ /sec Cooling -5 ℃/sec
150 120
Preheat
60 ~ 120 sec
5sec
Time
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LRGB9553-SB/TR1 Precautions For Use: Storage time:
1.The operation of Temperatures and RH are : 5 ℃~35℃,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH60%, they should be treated at 60 ℃± 5 ℃fo r 15hrs.
Page 8/9
Drive Method:
LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40 % of its desired value.
Circuit model A LED
Circuit model B LED
(A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED.
Cleaning:
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED.
ESD(Electrostatic Discharge):
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LRGB9553-SB/TR1 Reliability Test: Page 9/9
Classification
Test Item
Test Condition
1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs)
Reference Standard
MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1
Operating Life Test
High Temperature Storage Test Endurance Test Low Temperature Storage Test
1.Ta=105 ℃±5 ℃ 2.t=1000 hrs (-24hrs, +72hrs)
MIL-STD-883D:1008 JIS C 7021: B-10
1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs)
JIS C 7021: B-12
High Temperature High Humidity Storage Test
1.IR-Reflow In-Board, 2 Times 2.Ta=65 ℃±5℃ 3.RH=90 %~95 % 4.t=1000hrs ±2hrs 1.IR-Reflow In-Board,2 times 2.Ta=105 ℃±5℃& -40 ℃±5℃ (10min) (10min) 3.total 10 cycles
MIL-STD-202F:103B JIS C 7021: B-11
Thermal Shock Test
MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011
Solder Resistance Test
1.T.Sol=260 ℃±5℃ 2.Dwell Time= 10 ±1sec. 1.T.Sol=235 ℃±5℃ 2.Immersion time 2 ±0.5sec 3.Immersion rate 25 ±2.5mm/sec 4.Immersion rate 25 ±2.5mm/sec 5.Coverage ≧95% of the dipped surface 1.105 ℃ ~ 25 ℃ ~ 55 ℃ ~ 25 ℃ 30mins 5mins 30mins 5mins 2.10 Cyeles
MIL-STD-202F: 210A MIL-STD-750D: 2031 JIS C 7021: A-1 MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4
Solderability Test Environmental Test Temperature Cycling
Solderability Test
Ramp-up rate(183 ℃ to Peak) +3 ℃ s econd max Temp. maintain at 125( ±25) ℃ 120 seconds max Temp. maintain above 183 ℃ 60-150 seconds Peak temperature range 235 ℃ +5-0℃ Time within 5 ℃ of actual Peak Temperature(tp) 10-30 seconds Ramp-down rate +6 ℃/second max
MIL-STD-750D:2031.2 J-STD-020
很抱歉,暂时无法提供与“LRGB9553-SB-TR1”相匹配的价格&库存,您可以联系我们找货
免费人工找货