LSEFG9553-TR1

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT LED TAPE AND REEL Pb Lead-Free Parts LSEFG9553/TR1 DATA SHEET DOC. NO REV DATE : : QW0905-L SEFG9553/TR1 D : 21 - Dec. - 2007 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSEFG9553/TR1 Page 1/8 Package Dimensions 3.5 3.2 0.7±0.05 0.7±0.05 1.95 2.6 3 2 4 1 0.7±0.05 2.8 0.7±0.05 2.2 0.6 1.95 1.05 1.5 0.9 0.9 SEF 3+ 2G -4 +1 Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. Carrier Type Dimensions 4.0 2.0 1.55 0.23 1.75 5.5 12.0±0.3 9.3 Polarity 4.06 4.0 3.12 2.24 Note : The tolerances unless mentioned is ±0.2mm,Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSEFG9553/TR1 Page 2/8 Reel Dimensions 16.0±1.0 ψ178±2.0 14.2± 1.0 74.0±1.5 Part No. LSEFG9553/TR1 Description 12.0mm tape,7"reel Quantity/Reel 1500 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. : LSEFG9553/TR1 Page 3/8 Absolute Maximum Ratings at Ta=25 ℃ Ratings Parameter Symbol SEF G 30 120 100 10 UNIT Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V IF IFP PD Ir 50 90 120 mA mA mW μA ---- Electrostatic Discharge Operating Temperature Storage Temperature ESD Topr Tstg 2000 -40 ~ +85 -40 ~ +100 V ℃ ℃ Typical Electrical & Optical Characteristics (Ta=25 ℃) COLOR PART NO MATERIAL Emitted AlGaInP LSEFG9553/TR1 Peak Dominant wave wave length length λPnm λDnm Spectral halfwidth △λ nm Forward Luminous Viewing voltage intensity angle @20mA(V) @20mA(mcd) 2θ 1/2 (deg) Min. Max. Min. Typ. 500 32 120 120 Lens ---Water Clear 565 605 ---17 30 Orange Green 1.7 1.7 2.6 2.6 200 12.5 GaP Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSEFG9553/TR1 Page4/8 Typical Electro-Optical Characteristics Curve SEF CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 1000 Forward Current(mA) 100 Relative Intensity Normalize @20mA 2.5 2.0 1.5 1.0 0.5 0.0 10 1.0 0.1 1.0 1.5 2.0 2.5 3.0 1.0 10 100 1000 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature Forward Current(mA) Fig.4 Relative Intensity vs. Temperature Forward Voltage@20mA Normalize @25℃ Relative Intensity@20mA Normalize @25℃ -40 -20 0 20 40 60 80 100 1.2 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 1.1 1.0 0.9 0.8 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength Fig.6 Directivity Radiation Relative Intensity@20mA 1.0 0° -30° 30° 0.5 -60° 60° 0.0 500 550 600 650 100% 75% 50% 25% 0 25% 50% 75% 100% Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LSEFG9553/TR1 Page 5/8 Typical Electro-Optical Characteristics Curve G CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.5 1000 Forward Current(mA) 100 Relative Intensity Normalize @20mA 3.0 2.5 2.0 1.5 1.0 0.5 0.0 10 1.0 0.1 1.0 2.0 3.0 4.0 5.0 1.0 10 100 1000 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature Forward Current(mA) Fig.4 Relative Intensity vs. Temperature 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Forward Voltage@20mA Normalize @25℃ 1.1 1.0 0.9 0.8 -40 -20 0 20 40 60 80 100 Relative Intensity@20mA Normalize @25℃ 1.2 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength Fig.6 Directivity Radiation 0° -30° 30° Relative Intensity@20mA 1.0 0.5 -60° 60° 0.0 500 550 600 650 100% 75% 50% 25% 0 25% 50% 75% 100% Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LSEFG9553/TR1 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. Page 6/8 2. Wave Solder Soldering heat Max. 260 ℃ 245± 5℃ within 5 sec Preheat 120 ~ 150 ℃ 120 ~ 180 sec 3-1. LEAD Reflow Solder Temp. (℃) 240 Rising +5 ℃/sec Cooling -5℃/sec 150 120 Preheat 60 ~ 120 sec 5sec Time 3-2 PB-Free Reflow Solder 1~5 ° C/sec 260 ° C MaX. 10sec.Max 1~5 ° C/sec Preheat 180~200 ° C Above 220 ° C 60 sec.Max. 120 sec.Max. Note: 1.Wave solder and reflow soldering should not be made more than one time. 2.You can just only select one of the soldering conditions as above. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LSEFG9553/TR1 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH