LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT LED TAPE AND REEL
Pb
Lead-Free Parts
LSIR9553/TR1
DATA SHEET
DOC. NO REV DATE :
:
QW0905-L SIR9553/TR1 A
: 13 - Jun. - 2008
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LSIR9553/TR1 Page 1/7
Package Dimensions
3.5 3.2 1.85
2.8
2.2
1.85 0.95 0.9 0.9
-
+
Note : 1.All dimension are in millimeter tolerance is ± 0.2mm unless otherwise noted. 2.Specifications are subject to change without notice.
Carrier Type Dimensions
4.0
2.0
1.55
0.23
1.75
5.5 12.0±0.3 9.3 Polarity 4.06
4.0
3.12
2.24
Note : The tolerances unless mentioned is ±0.2mm,Angle ± 0.5. Unit=mm.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LSIR9553/TR1 Page 2/7
Reel Dimensions
16.0±1.0
ψ178±2.0
14.2±1.0
74.0± 1.5
Part No. LSIR9553/TR1
Description 12.0mm tape,7"reel
Quantity/Reel 1500 devices
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LSIR9553/TR1 Page 3/7
Absolute Maximum Ratings at Ta=25 ℃
Ratings Parameter Symbol SIR Power Dissipation Peak Forward Current (300PPS,10 μs Pulse) Forward Current Reverse Voltage Electrostatic Discharge Operating Temperature Storage Temperature PD IFP IF Vr ESD Topr Tstg
100 1 50 5
UNIT
mW A mA V
2000 -40 ~ +85 -40 ~ +85
V ℃ ℃
Electrical Optical Characteristics (Aa=25℃)
PARAMETER Radiant Intensity Aperture Radiant Incidence Peak Emission Wavelength Spectral Line Half Width Forward Voltage Reverse Current Viewing Angle SYMBOL Le Ee
Min. 0.5 0.07
Typ. 1.0 0.14 880 50 1.4
Max.
UNIT mW/sr mW/cm nm nm
2
TEST CONDITION IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V
λpeak △λ
VF IR 2θ1/2
1.7 100
V
μA
deg
120
Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The radiant intensity data did not including ±15% testing tolerance.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LSIR9553/TR1 Page 4/7
Typical Electro-Optical Characteristics Curve
SIR CHIP
Fig.1 Forward Current vs. Rorward Voltage
1000
Fig.2 Relative Radiant Intensity vs. Wavelength
1.0
100 10 1 0.1 0.5
Relative Radiant Intensity Normalize @20mA
Forward Current(mA)
0.5
1.0
1.5
2.0
2.5
0.0 750
800
850
900
950
1000
1050
Forward Voltage(V)
Wavelength(nm)
Fig.3 Relative Radiant Power vs. Forward DC Current
10.0
Fig.4 Relative Radiant Power vs. Forward Peak Current
10.0
Relative Radiant Power Normalize @20mA
Relative Radiant Power Normalize @100 mA
10 100
1.0
1.0
0.1 1
0.1 10
100
1000
IFDC (mA)
IFPK (mA)
Fig.5 Forward DC Voltage vs. Temperature Forward DC Voltage @20 mA Normalize @ 25 ℃
1.2
Fig.6 Relative Radiant Power vs. Temperature
3.0
Relative Radiant Power Normalize @ 20mA,25 ℃
-20 0 20 40 60 80 100
2.5 2.0 1.5 1.0 0.5 0.0 -40
1.1 1.0
0.9 0.8 -40
-20
0
20
40
60
80
100
Ambient Temperature [℃]
Ambient Temperature[ ℃]
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LSIR9553/TR1 Recommended Soldering Conditions 1. Hand Solder
Basic spec is ≦ 280℃ 3 sec one time only.
Page 5/7
2. Wave Solder
Soldering heat Max. 260 ℃ 245±5℃ within 5 sec 120 ~ 150℃ Preheat
120 ~ 180 sec
3. LEAD Reflow Solder
Temp. (℃) 240
Rising +5℃ /sec Cooling -5 ℃/sec
150 120
Preheat
60 ~ 120 sec
5sec
Time
4. PB-Free Reflow Solder
1~5 ° C/sec 260 ° C MaX. 10sec.Max
1~5 ° C/sec
Preheat 180~200 ° C
Above 220 ° C 60 sec.Max.
120 sec.Max.
Note: 1.Wave solder and reflow soldering should not be made more than one time. 2.You can just only select one of the soldering conditions as above.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LSIR9553/TR1 Precautions For Use: Storage time:
1.The operation of Temperatures and RH are : 5 ℃~35℃,RH
很抱歉,暂时无法提供与“LSIR9553-TR1”相匹配的价格&库存,您可以联系我们找货
免费人工找货