LSIR9S53-TR1

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT LED TAPE AND REEL Pb Lead-Free Parts LSIR9S53/TR1 DATA SHEET DOC. NO REV. DATE : QW0905-LSIR9S53/TR1 :A : 14 - Oct. - 2008 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LSIR9S53/TR1 Page 1/7 Package Dimensions 3.0 1.3 1.4 2.0 2.7 1.3 0.7 0.7 Carrier Type Dimensions 4.0 1.75 2.0 4.0 1.5 0.25 3.5 5.3 Polarity 8.0 ±0.3 3.44 1.53 Note : The tolerances unless mentioned is ±0.2mm,Angle ± 0.5. Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LSIR9S53/TR1 Page 2/7 Reel Dimensions 2.0±0.5 0 .4 178± 1.5 0 .8 0 .6 0 .2 6.0± 1.0 0 .4 ψ13.5±1.0 Part No. LSIR9S53/TR1 Description 8.0mm tape,7"reel 0 .2 0 .6 0 .8 9.0±1.0 12.0± 1.0 Quantity/Reel 2000 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LSIR9S53/TR1 Page 3/7 Absolute Maximum Ratings at Ta=25 ℃ Ratings Parameter Symbol SIR Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V Electrostatic Discharge( * ) Operating Temperature Storage Temperature IF IFP PD Ir ESD Topr Tstg 50 1 100 5 2000 -40 ~ +85 -40 ~ +100 mA mA mW UNIT μA V ℃ ℃ Static the Use of conductive wrist band or anti-electrosatic *glove isElectricity or power surge will damageLED.LED.devices, aequipment and machinery must be properly recommended when handing these All grounded. Electrical Optical Characteristics (Aa=25℃) PARAMETER Radiant Intensity Aperture Radiant Incidence Peak Emission Wavelength Spectral Line Half Width Forward Voltage Reverse Current Viewing Angle SYMBOL Le Ee Min. 0.5 0.07 Typ. 0.8 0.11 880 50 1.4 Max. UNIT mW/sr mW/cm nm nm 2 TEST CONDITION IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V λpeak △λ VF IR 2θ1/2 1.7 100 V μA deg 120 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The radiant intensity data did not including ±15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LSIR9S53/TR1 Page4/7 Typical Electro-Optical Characteristics Curve SIR CHIP Fig.1 Forward Current vs. Rorward Voltage 1000 Fig.2 Relative Radiant Intensity vs. Wavelength 1.0 100 10 1 0.1 0.5 Relative Radiant Intensity Normalize @20mA Forward Current(mA) 0.5 1.0 1.5 2.0 2.5 0.0 750 800 850 900 950 1000 1050 Forward Voltage(V) Wavelength(nm) Fig.3 Relative Radiant Power vs. Forward DC Current 10.0 Fig.4 Relative Radiant Power vs. Forward Peak Current 10.0 Relative Radiant Power Normalize @20mA Relative Radiant Power Normalize @100 mA 10 100 1.0 1.0 0.1 1 0.1 10 100 1000 IFDC (mA) IFPK (mA) Fig.5 Forward DC Voltage vs. Temperature Forward DC Voltage @20 mA Normalize @ 25 ℃ 1.2 Fig.6 Relative Radiant Power vs. Temperature 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 1.1 1.0 0.9 0.8 -40 -20 0 20 40 60 80 100 Ambient Temperature [℃] Relative Radiant Power Normalize @ 20mA,25 ℃ Ambient Temperature[ ℃] LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LSIR9S53/TR1 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. Page5/7 2. Wave Solder Soldering heat Max. 260℃ 245±5℃ within 5 sec Preheat 120 ~ 150℃ 120 ~ 180 sec 3. LEAD Reflow Solder Temp. (℃) 240 Rising +5℃/sec Cooling -5℃/sec 150 120 Preheat 60 ~ 120 sec 5sec Time 4. PB-Free Reflow Solder 1~5° C/sec 260° C MaX. 10sec.Max 1~5° C/sec Preheat 180~200 ° C Above 220 ° C 60 sec.Max. 120 sec.Max. Note: 1.Wave solder and reflow soldering should not be made more than one time. 2.You can just only select one of the soldering conditions as above. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LSIR9S53/TR1 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5℃~35℃,RH