LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT LED TAPE AND REEL
Pb
Lead-Free Parts
LSR9553
DATA SHEET
DOC. NO REV. DATE :
:
QW0905-LSR9553 B
: 07 - Mar. - 2006
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LSR9553 Page 1/6
Package Dimensions
3.5 3.2 1.85
2.8
2.2
1.85 0.95 0.9 0.9
-
+
Note : 1.All dimension are in millimeter tolerance is ± 0.25mm unless otherwise noted. 2.Specifications are subject to change without notice.
Directivity Radiation
0° -30° 30°
-60°
60°
100% 75% 50%
25%
0
25%
50% 75% 100%
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LSR9553 Page 2/6
Absolute Maximum Ratings at Ta=25 ℃
Absolute Maximum Ratings Parameter Symbol SR Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V Operating Temperature Storage Temperature IF IFP PD Ir Topr Tstg 30 100 100 10 -40 ~ +85 -40 ~ +100 mA mA mW UNIT
μA ℃ ℃
Typical Electrical & Optical Characteristics (Ta=25 ℃)
PART NO
MATERIAL
COLOR
Emitted Lens
Water Clear
Peak wave length λPnm
Spectral halfwidth △λnm
Forward voltage @20mA(V)
Luminous intensity
@20mA(mcd)
Viewing angle 2θ 1/2 (deg)
Min. Max. Min. Typ. 660 20 1.5 2.4 28 50 120
LSR9553
GaAlAs
Red
Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LSR9553 Page 3/6
Typical Electro-Optical Characteristics Curve
SR CHIP
Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current
3.0
1000
Forward Current(mA)
100
Relative Intensity Normalize @20mA
2.5 2.0 1.5 1.0 0.5 0.0
10 1.0
0.1 1.0 2.0 3.0 4.0 5.0
1.0
10
100
1000
Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature
Forward Current(mA) Fig.4 Relative Intensity vs. Temperature
3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100
Forward Voltage@20mA Normalize @25℃
1.1 1.0
0.9 0.8 -40 -20 0 20 40 60 80 100
Relative Intensity@20mA Normalize @25℃
1.2
Ambient Temperature( ℃)
Ambient Temperature( ℃)
Fig.5 Relative Intensity vs. Wavelength
Relative Intensity@20mA
1.0
0.5
0.0 600 650 700 750
Wavelength (nm)
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. : LSR9553
Recommended Soldering Conditions
1.
Hand Solder Basic spec is ≦ 280℃ 3 sec one time only.
Page 4/6
2. Wave Solder
Soldering heat Max. 260 ℃ 245±5℃ within 5 sec Preheat
120 ~ 150℃
120 ~ 180 sec
3-1. LEAD Reflow Solder
Temp. (℃) 240
Rising +5℃/sec Cooling -5℃ /sec
150 120
Preheat
60 ~ 120 sec
5sec
Time
3-2 PB-Free Reflow Solder
1~5 ° C/sec 260 ° C MaX. 10sec.Max
1~5 ° C/sec
Preheat 180~200 ° C
Above 220 ° C 60 sec.Max.
120 sec.Max.
Reflow Soldering should not be done more than two times.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. : LSR9553
Precautions For Use: Storage time:
1.The operation of Temperatures and RH are : 5 ℃~35℃,RH
很抱歉,暂时无法提供与“LSR9553”相匹配的价格&库存,您可以联系我们找货
免费人工找货