LURF9033-TR1

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT TAPE AND REEL Pb Lead-Free Parts LURF9033/TR1 DATA SHEET DOC. NO REV. DATE : : : QW0905-LURF9033/TR1 A 01 - Apr. - 2009 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LURF9033/TR1 Page 1/7 Package Dimensions Cathode 4.6±0.5 2.5 0.4±0.1 0.5±0.1 2.0 ψ1.9 1.4 2.8 0.16 0.7 0.4 Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. Carrier Type Dimensions 4.0 2.16 0.3 9.3 12±0.3 5.5 4.85 Polarity 1.75 4.0 3.32 2.0 1.5 Note : The tolerances unless mentioned is ±0.2mm,Angle ± 0.5. Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LURF9033/TR1 Page 2/7 Reel Dimensions 16.0±1.0 ψ178±2.0 14.2±1.0 74.0± 1.5 Part No. LURF9033/TR1 Description 12.0mm tape,7"reel Quantity/Reel 1500 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. : LURF9033/TR1 Page 3/7 Absolute Maximum Ratings at Ta=25 ℃ Ratings Parameter Symbol URF Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V Electrostatic Discharge(*) Operating Temperature Storage Temperature IF IFP PD Ir ESD Topr Tstg 50 130 120 10 2000 -40 ~ +85 -40 ~ +100 mA mA mW UNIT μA V ℃ ℃ Electricity or power surge will the Use of conductive wrist band or anti-electrosatic * Static is recommended when handingdamageLED.LED.devices, aequipment and machinery must be properly glove these All grounded. Typical Electrical & Optical Characteristics (Ta=25 ℃) PART NO MATERIAL Emitted COLOR Lens Water Clear Luminous Viewing Dominant Spectral Forward intensity angle wave halfwidth voltage length △λ nm @20 mA(V) @20mA(mcd) 2θ 1/2 (deg) λDnm Min. Max. Min. 630 20 1.5 2.4 Typ. 20 LURF9033/TR1 AlGaInP Red 900 1500 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LURF9033/TR1 Page 4/7 Typical Electro-Optical Characteristics Curve URF CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.5 3.0 100 1000 Forward Current(mA) Relative Intensity Normalize @20mA 2.5 2.0 1.5 1.0 0.5 0 10 1.0 0.1 1.0 1.5 2.0 2.5 3.0 1.0 10 100 1000 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature 1.2 Forward Current(mA) Fig.4 Relative Intensity vs. Temperature 3.0 Relative Intensity@20mA Normalize@25 ℃ -40 -20 -0 20 40 60 80 100 Forward Voltage@20mA Normalize @25 ℃ 2.5 2.0 1.5 1.0 0.5 0 -40 -20 -0 20 40 60 80 100 1.1 1.0 0.9 0.8 Ambient Temperature( ℃) Ambient Temperature(℃) Fig.5 Relative Intensity vs. Wavelength Fig.6 Directive Radiation Relative Intensity@20mA 1.0 0° -30 ° 30° 0.5 -60 ° 60° 0 550 600 650 700 100% 75% 50% 25% 0 25% 50% 75% 100% Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LURF9033/TR1 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280 ℃ 3 sec one time only. Page 5/7 2. Wave Solder Soldering heat Max. 260 ℃ 245±5℃ within 5 sec Preheat 120 ~ 150℃ 120 ~ 180 sec 3. LEAD Reflow Solder Temp. (℃) 240 Rising +5℃ /sec Cooling -5 ℃/sec 150 120 Preheat 60 ~ 120 sec 5sec Time 4. PB-Free Reflow Solder 1~5¢XC/sec 260¢XC MaX. 10sec.Max Preheat 180~200¢XC 1~5¢XC/sec Above 220¢XC 60 sec.Max. 120 sec.Max. Note: 1.Wave solder and reflow soldering should not be made more than one time. 2.You can just only select one of the soldering conditions as above. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LURF9033/TR1 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH