LURF9033-TR3

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT TAPE AND REEL Pb Lead-Free Parts LURF9033/TR3 DATA SHEET DOC. NO REV. DATE : : QW0905-LURF9033/TR3 A : 13 - Oct - 2005 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. : LURF9033/TR3 Page 1/7 Package Dimensions Cathode 0.4±0.1 0.5± 0.12.0 2.5 ψ1.9 1.4 0.76MAX 2.8 0.31TYP 0.61TYP 1.07TYP 7.62MAX 0.13TYP Note : 1.All dimension are in millimeter tolerance is ± 0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. Carrier Type Dimensions 4.0 2.52 t 9.3 12.0±0.3 7.84 5.5 Polarity 1.75 2.0 4.0 ψ1.5 3.37 Note : The tolerances unless mentioned is ±0.2mm,Angle ± 0.5. Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. : LURF9033/TR3 Page 2/7 Reel Dimensions 16.0± 1.0 ψ178±2.0 14.2±1.0 74.0±1.5 Part No. LURF9033/TR3 Description 12.0mm tape,7"reel Quantity/Reel 1500 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. : LURF9033/TR3 Page 3/7 Absolute Maximum Ratings at Ta=25 ℃ Ratings Parameter Symbol URF Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V Electrostatic Discharge Operating Temperature Storage Temperature Soldering Temperature IF IFP PD Ir ESD Topr Tstg Tsol 50 130 120 10 2000 -40 ~ +85 -40 ~ +100 Max 260 ℃ for 5 sec Max (2mm from body) mA mA mW UNIT μA V ℃ ℃ Typical Electrical & Optical Characteristics (Ta=25 ℃) PART NO MATERIAL Emitted COLOR Luminous Viewing Dominant Spectral Forward intensity wave angle halfwidth voltage @20 mA(V) @20mA(mcd) 2θ 1/2 length △λ nm λDnm (deg) Lens Water Clear 630 20 Min. Max. Min. Typ. 1.5 2.4 350 650 20 LURF9033/TR3 AlGaInP Red Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. : LURF9033/TR3 Page 4/7 Typical Electro-Optical Characteristics Curve URF CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.5 3.0 100 1000 Forward Current(mA) Relative Intensity Normalize @20mA 2.5 2.0 1.5 1.0 0.5 0 10 1.0 0.1 1.0 1.5 2.0 2.5 3.0 1.0 10 100 1000 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature 1.2 Forward Current(mA) Fig.4 Relative Intensity vs. Temperature 3.0 Forward Voltage@20mA Normalize @25℃ Relative Intensity@20mA Normalize@25℃ -40 -20 -0 20 40 60 80 100 2.5 2.0 1.5 1.0 0.5 0 -40 -20 -0 20 40 60 80 100 1.1 1.0 0.9 0.8 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength Relative Intensity@20mA 1.0 0.5 0 550 600 650 700 Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. : LURF9033/TR3 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. Page 5/7 2. Wave Solder Soldering heat Max. 260 ℃ 245±5℃ within 5 sec Preheat 120 ~ 150 ℃ 120 ~ 180 sec 3-1. LEAD Reflow Solder Temp. (℃) 240 Rising +5 ℃/sec Cooling -5℃/sec 150 120 Preheat 60 ~ 120 sec 5sec Time 3-2 PB-Free Reflow Solder 1~5° C/sec 260 ° C MaX. 10sec.Max 1~5 ° C/sec Preheat 180~200 ° C Above 220 ° C 60 sec.Max. 120 sec.Max. Reflow Soldering should not be done more than two times. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. : LURF9033/TR3 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH