LVY9033-T-TR2

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT TYPE AND REEL Pb Lead-Free Parts LVY9033/T/TR2 DATA SHEET DOC. NO REV. DATE : QW0905-LVY9033/T/TR2 :B : 08 - Sep. - 2007 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LVY9033/T/TR2 Page 1/7 Package Dimensions Cathode 2.5 0.4±0.1 0.5±0.1 2.0 5.8±0.5 ψ1.9 3.05±0.5 1.4 2.8 0.7 4.3±0.5 Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. Carrier Type Dimensions 4.0 0.3 9.3 12±0.3 5.5 6.43 Polarity 1.75 2.0 4.0 ψ1.55 3.05 Note : The tolerances unless mentioned is ±0.2mm,Angle ± 0.5. Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LVY9033/T/TR2 Page 2/7 Reel Dimensions 16.0±1.0 ψ178±2.0 14.2±1.0 74.0±1.5 Part No. LVY9033/T/TR2 Description 12.0mm tape,7"reel Quantity/Reel 1500 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LVY9033/T/TR2 Page 3/7 Absolute Maximum Ratings at Ta=25 ℃ Ratings Parameter Symbol VY Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V Electrostatic Discharge Operating Temperature Storage Temperature IF IFP PD Ir ESD Topr Tstg 30 60 75 10 2000 -40 ~ +85 -40~ +100 mA mA mW UNIT μA V ℃ ℃ Typical Electrical & Optical Characteristics (Ta=25 ℃) Dominant wave length λDnm Spectral halfwidth △λnm PART NO MATERIAL Emitted COLOR Lens Water Clear Forward voltage @2mA(V) Luminous intensity @2mA(mcd) Viewing angle 2θ 1/2 (deg) Min. 590 20 1.8 Max. 2.2 Min. Typ. 22 45 20 LVY9033/T/TR2 AlGaInP Yellow Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LVY9033/T/TR2 Page4/7 Typical Electro-Optical Characteristics Curve VY CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 1000 3.0 Forward Current(mA) 100 10 Relative Intensity Normalize @20mA 1.5 2.0 2.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 1.0 10 100 1000 1.0 0.1 1.0 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature 1.2 Forward Current(mA) Fig.4 Relative Intensity vs. Temperature 3.0 Forward Voltage@20mA Normalize @25 ℃ Relative Intensity@20mA Normalize @25 ℃ -40 -20 0 20 40 60 1.1 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 1.0 0.9 0.8 80 100 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength 1.0 Fig.6 Directive Radiation Relative Intensity@20mA 0° -30 ° 30° 0.5 -60 ° 60 ° 0.0 500 550 600 650 100% 75% 50% 25% 0 25% 50% 75% 100% Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LVY9033/T/TR2 Recommended Soldering Conditions 1. Page 5/7 Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. 2. Wave Solder Soldering heat Max. 260 ℃ 245±5℃ within 5 sec Preheat 120 ~ 150 ℃ 120 ~ 180 sec 3-1. LEAD Reflow Solder Temp. (℃) 240 Rising +5℃ /sec Cooling -5℃/sec 150 120 Preheat 60 ~ 120 sec 5sec Time 3-2 PB-Free Reflow Solder 1~5 ° C/sec 260° C MaX. 10sec.Max 1~5 ° C/sec Preheat 180~200 ° C Above 220 ° C 60 sec.Max. 120 sec.Max. Note: 1.Wave solder and reflow soldering should not be made more than one time. 2.You can just only select one of the soldering conditions as above. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LVY9033/T/TR2 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH