ATS025A0X3-34Z

Data Sheet June 3, 2009 Austin MegaLynxTM: Non-Isolated DC-DC Power Modules: 4.5 – 5.5Vdc input; 0.8 to 3.63Vdc output; 30A Output Current 6.0 – 14Vdc input; 0.8dc to 5.5Vdc output; 25A Output Current Features Compliant to RoHS EU Directive 2002/95/EC (Z versions) Compliant to ROHS EU Directive 2002/95/EC with lead solder exemption (non-Z versions) Delivers up to 30A of output current High efficiency – 93% 3.3V full load (VIN=12Vdc) Available in two input voltage ranges ATH: 4.5 to 5.5Vdc ATS: 6.0 to 14Vdc Output voltage programmable from RoHS Compliant Applications Distributed power architectures Intermediate bus voltage applications Telecommunications equipment Servers and storage applications Networking equipment ATH: 0.8 to 3.63Vdc ATS: 0.8 to 5.5Vdc Small size and low profile: 50.8 mm x 12.7 mm x 14.0 mm 2.00 in. x 0.50 in. x 0.55 in. Monotonic start-up into pre-biased output Output voltage sequencing (EZ-SEQUENCE Remote On/Off Remote Sense Over current and Over temperature protection Parallel operation with active current sharing Wide operating temperature range (-40°C to 85°C) UL* 60950 Recognized, CSA† C22.2 No. 60950-00 Certified, and VDE‡ 0805 (EN60950-1 rd 3 edition) Licensed ISO** 9001 and ISO 14001 certified manufacturing facilities TM ) Description The Austin MegaLynx series SIP power modules are non-isolated DC-DC converters in an industry standard package that can deliver up to 30A of output current with a full load efficiency of 92% at 3.3Vdc output voltage (VIN = 12Vdc). The ATH series of modules operate off an input voltage from 4.5 to 5.5Vdc and provide an output voltage that is programmable from 0.8 to 3.63Vdc, while the ATS series of modules have an input voltage range from 6 to 14V and provide a programmable output voltage ranging from 0.8 to 5.5Vdc. Both series have a sequencing feature that enables designers to implement various types of output voltage sequencing when powering multiple modules on the board. Additional features include remote On/Off, adjustable output voltage, remote sense, over current, over temperature protection and active current sharing between modules. * UL is a registered trademark of Underwriters Laboratories, Inc. † ‡ CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards Document No: DS05-012 ver. 1.04 PDF Name: austin_megalynx_sip.pdf Data Sheet June 3, 2009 Austin MegaLynxTM: Non-Isolated DC-DC Power Modules: 4.5 – 5.5Vdc input; 0.8 – 3.63Vdc output; 30A output current 6.0 – 14Vdc input; 0.8 – 5.5Vdc output; 25A output current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Input Voltage Continuous Sequencing pin voltage Operating Ambient Temperature (see Thermal Considerations section) Storage Temperature All Tstg -55 125 °C All All All VIN VsEQ TA -0.3 -0.3 -40 15 15 85 Vdc Vdc °C Device Symbol Min Max Unit Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Operating Input Voltage Device ATH ATS Maximum Input Current (VIN= VIN,min , VO= VO,set, IO=IO, max) Inrush Transient Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; VIN=6.0V to 14.0V, IO= IOmax ; See Figure 1) Input Ripple Rejection (120Hz) ATH ATS All All All Symbol VIN VIN IIN,max IIN,max It 100 50 2 Min 4.5 6.0 Typ 5.0 12 Max 5.5 14 27 26 1 Unit Vdc Vdc Adc Adc As mAp-p dB 2 LINEAGE POWER 2 Data Sheet June 3, 2009 Austin MegaLynxTM: Non-Isolated DC-DC Power Modules: 4.5 – 5.5Vdc input; 0.8 – 3.63Vdc output; 30A output current 6.0 – 14Vdc input; 0.8 – 5.5Vdc output; 25A output current Electrical Specifications (continued) Parameter Output Voltage Set-point (VIN=VIN,min, IO=IO, max, Tref=25°C) Output Voltage (Over all operating input voltage, resistive load, and temperature conditions until end of life) Adjustment Range Selected by an external resistor ATH ATS Output Regulation Line (VIN=VIN, min to VIN, max) Load (IO=IO, min to IO, max) Temperature (Tref=TA, min to TA, max) Output Ripple and Noise on nominal output (VIN=VIN, nom and IO=IO, min to IO, max COUT = 0.01μF // 0.1μF // 10μF ceramic capacitors) Peak-to-Peak (5Hz to 20MHz bandwidth) Peak-to-Peak (5Hz to 20MHz bandwidth) Peak-to-Peak (5Hz to 20MHz bandwidth) External Capacitance ESR ≥ 1 mΩ ESR ≥ 10 mΩ Output Current (VIN = 5Vdc/12Vdc) Output Current (VIN = 5Vdc) Output Current Limit Inception (Hiccup Mode) Output Short-Circuit Current (VO≤250mV) ( Hiccup Mode ) Efficiency VIN=12Vdc, TA=25°C IO=25A , VO= VO,set VO,set = 0.8dc VO,set = 1.2Vdc VO,set = 1.5Vdc VO,set = 1.8Vdc VO,set = 2.5Vdc VO,set = 3.3Vdc VO,set = 5.0Vdc Efficiency VIN=5Vdc, TA=25°C IO=30A , VO= VO,set VO,set = 0.8dc VO,set = 1.2Vdc VO,set = 1.5Vdc VO,set = 1.8Vdc VO,set = 2.5Vdc VO,set = 3.3Vdc Switching Frequency, Fixed All η η η η η η η η η η η η η fsw ⎯ 82.0 84.0 88.0 89.5 91.0 92.5 94.0 84.0 88.5 90.0 91.0 93.0 95.0 300 ⎯ % % % % % % % % % % % % % kHz All All ATH025/ATS025 ATH030 All All CO, max CO, max Io Io IO, lim IO, s/c 0 0 0 0 120 20 2,000 10,000 25 30 µF µF Adc Adc % Iomax % Iomax All All All 0.5 0.1 0.4 1 % VO, set % VO, set % VO, set VO VO 0.8 0.8 3.63 5.5 Vdc Vdc All VO, set –3.0 +3.0 % VO, set Device All Symbol VO, set Min -1.5 Typ ⎯ Max +1.5 Unit % VO, set Vo ≤ 2.5V 2.5V < Vo ≤ 3.63V Vo > 3.63V 50 75 100 mVpk-pk mVpk-pk mVpk-pk LINEAGE POWER 3 Data Sheet June 3, 2009 Austin MegaLynxTM: Non-Isolated DC-DC Power Modules: 4.5 – 5.5Vdc input; 0.8 – 3.63Vdc output; 30A output current 6.0 – 14Vdc input; 0.8 – 5.5Vdc output; 25A output current Electrical Specifications (continued) Parameter Dynamic Load Response (dIO/dt=5A/μs; VIN=VIN, nom; VO=3.3V; TA=25°C;) Load Change from Io= 0% to 50% of IO,max; No external output capacitors Peak Deviation Settling Time (VO