CAR2024FPBY0-1A

CAR2024FP Series 2000 Watt 24V Front End Power Supply Features: ∎ Compact 1U Profile ∎ Output voltage and power optimal for Industrial, Wireless Base Stations, and RF Amplifiers ∎ Constant Current Characteristic ∎ N+1 Redundancy ∎ High Power Density (21W/in3) ∎ 3.3VSB, Active Load Sharing, I²C and PMBus digital communication ∎ Remote On/Off and Remote Sense functions FEATURES High Power Density 21W/in3 Load Sharing & Fault Tolerant Automatic Fan Speed Control System Scalability up to 8kW Universal Input & International Certifications BENEFITS More system space for application circuits and hardware Excellent reliability in N+1 operation Reduces audible noise and increases reliability Allows flexibility with minimum investment Reduces logistical costs KEY MARKET SEGMENTS & APPLICATIONS ∎ Amplifier ∎ Industrial ∎ Wireless SPECIFICATIONS Input Voltage Range Input Current Maximum Inrush Current Input Protection Power Factor Efficiency Output Power Output Voltage Range Output Current Standby Bias Voltage Voltage Regulation Output Ripple & Noise Transient Response Hold-Up Time Remote On/Off Current Limit Protection Short Circuit Protection Over Voltage Protection Operating Temperature Over Temperature Protection EMI LED Indicators Analog Status & Control Digital Status & Control Shock & Vibration Dimensions Safety Approvals Options rev 100506 Lineage Power 3000 Skyline Dr. Mesquite, TX 75149 Phone: (972) 284-2000 2,000 Watt +24V Front End Power Supply 180-264 VAC, 47-63 Hz, derate to 1200W for 85~180 VAC Input 12.6A @ 180VAC / 14.3A @ 100VAC, Full Load (max) 50A max. cold start (per ETS 300 132-1 and Bellcore specifications) Dual Fuse / 20 Amp / 250 VAC 0.99 (Typical) Up to 90.5% (see efficiency curve) 2000W at 28Vout, 1743W @ 21Vout 21 to 29 VDC with remote programming 83A @ 24Vout / 230VAC Operation 3.3VSB@1A (optional 5Vsb) ±2% of Vnom for any combination of line, load and temperature 1% (pk-pk) @ 20MHz with 0.1µF ceramic and 10µF Tantalum caps at the output 5% max deviation Recovery time 300μs @ 50% load step and di/dt < 1A/μs 15ms at full load measured down to 20V with 230Vac ON if >3V or open; OFF if +31Vdc ± 1V, Reset condition by recycling the AC input or applying Remote ON/OFF -10°C to +70°C. power derating above 50°C at 2.5%/°C Non-Latching, thermal shutdown point is set for 125°C and recovery point is 110°C FCC-B & EN55022-B with specified filter or at rack level, GR-1089-CORE LED Indicators to indicate AC OK, DC OK and other Fault Conditions Voltage Programming (V Prog), Load sharing (I Share), Remote On/Off, Current Monitor (I Monitor), AC OK, DC OK, Temperature Warning, Fault, PS Present, Module Enable, I2C and PMBus, see detailed specification for details NEBS GR-63-CORE Level 3 14.25 x 4.00 x 1.65” / 316.23 x 101.6 x 41.91mm IEC/UL/CSA/EN60950-1, CE Mark (LVD) 5VSB Output, Bezel www.lineagepower.com/oem Lineage Power 2841 Dow Avenue Tustin, CA 92780 USA Phone: (714) 544-6665 Lineage Power (China) 1353 Chenqiao Road, Shanghai Sengpu Industrial Park Shanghai, 201401 China Phone: 021 6710 8910 CAR2024FP Series 2000 Watt 24V Front End Power Supply OUTLINE DRAWING All Dimensions in Inches (mm) Tolerance: .XX = ± .02 in (.50 mm) .XXX = ± .010 in (.254 mm) EFFICIENCY CURVE: 110% 87% 90% 91% 90% Efficiency 90% 73% 70% 84% 50% 10% 20% 30% 50% 80% 100% Efficiency Load LED INDICATOR TEST CONDITION 1 NORMAL OPERATION 2 LOW/ or NO AC Input 3 OVP 4 OVER CURRENT 5 THERMO ALARM 6 Fault Over Temperature 7 Remote ON/OFF AC OK Green OFF Green Green Green Green Green DC OK Green OFF OFF OFF Green 110% OFF 90% OFF 73% 70% 84% MONITORING SIGNAL* FAULT FAULT DC OK AC OK TEMP OK OFF High High High High Red Low Low Low High Red Low Low High High Red Low Low High High OFF High High High Low Red 90% Low Low High Low 91% 90% 87% Red Low Low High High PART NUMBER DEFINITION GUIDE: CONNECTOR DRAWING: 50% 10% 20% 30% 50% 80% 100% CAR 20 24 F P x xx -1A Series 20=2000W Output Current 24=24V Output Voltage F=Front End Type P=Positive Polarity Rev. Blank=Non-compliant YO=5 of 6 Compliant ZO=6 of 6 Compliant RoHS B=Bezel Option Blank=None Options 1 D A#3 A#2 A#1 C B A 2 3 4 5 6 Load B#1 B#2 B#3 B#4 B#5 B#6 Output Connector: Mating Connector: Pin A1 A2 A3 A4 A5 A6 Pin B1 B2 B3 B4 B5 B6 Molex P/N 87663-4002 Molex P/N 87664-2001 Functions I Share N/C Temp OK I2C Address (A0) I2C Address (A1) I2C Address (A2) Functions V Prog OVP Test Point Remote ON/OFF DC OK AC OK Interrupt Examples: CAR2024FPBZ0-1A 2000W/24V Front End, Bezel, 6 of 6 RoHS CAR2024FPZ0-1A 2000W/24V Front End, 6 of 6 RoHS Functions VSB [3.3V] PS Present Signal Return Write Protect Remote Sense (+) Remote Sense (-) Functions Fault I Monitor Module Enable VSB [3.3V] Return SDA SCL Pin C1 C2 C3 C4 C5 C6 Pin D1 D2 D3 D4 D5 D6 Pin A#3 A#2 A#1 B#1 B#2 B#3 B#4 B#5 B#6 Blades Ground Neutral Line +V +V +V Return Return Return rev 100506 Lineage Power 3000 Skyline Dr. Mesquite, TX 75149 Phone: (972) 284-2000 Lineage Power 2841 Dow Avenue Tustin, CA 92780 USA Phone: (714) 544-6665 Lineage Power (China) 1353 Chenqiao Road, Shanghai Sengpu Industrial Park Shanghai, 201401 China Phone: 021 6710 8910 w ww.lineagepower.com/oem