CAR2548FPBY0-1A

CAR2548FP Series 2500 Watt 48V Front End Power Supply Features: ∎ Leading Edge Power Density, 27W/in3 in 1U Form Factor ∎ I2C Serial Bus and PMBus Interface ∎ Full Features Status & Control (Current, Voltage, AC OK, DC OK & Temperature OK), ∎ Active Current Sharing (Single Wire) ∎ Remote On/Off, Remote Sense, Voltage Program Circuits ∎ Microprocessor Based Design Allows for Automatic Fan Speed Control ∎ Optional Universal / 4-Bay 19” Rack Delivers 10kW of Power FEATURES High Power Density 27W/in3 Load Sharing & Fault Tolerant Automatic Fan Speed Control System Scalability up to 10,000 Watts Universal Input & International Certifications SPECIFICATIONS Input Voltage Range Input Current Maximum Inrush Current Input Protection Power Factor Efficiency Output Power Output Voltage Range Output Current Standby Bias Voltage Voltage Regulation Ouput Ripple & Noise Transient Response Switching Frequency Hold-Up Time Remote On/Off Current Limit Protection Short Circuit Protection Over Voltage Protection Operating Temperature Over Temperature Protection EMI LED Indicators Analog Status & Control Digital Status & Control Shock & Vibration Dimensions Weight Safety Approvals Options rev 100506 Lineage Power 3000 Skyline Dr. Mesquite, TX 75149 Phone: (972) 284-2000 Lineage Power 2841 Dow Avenue Tustin, CA 92780 USA Phone: (714) 544-6665 Lineage Power (China) 1353 Chenqiao Road, Shanghai Sengpu Industrial Park Shanghai, 201401 China Phone: 021 6710 8910 BENEFITS More system space for application circuits and hardware Excellent reliability in N+1 operation Reduces audible noise and increases reliability Allows flexibility with minimum investment Reduces logistical costs KEY MARKET SEGMENTS & APPLICATIONS ∎ Distributed Power ∎ High End Servers ∎ RF Amplifiers ∎ ATE Equipment ∎ High End Routers and Switchgear ∎ Semiconductor Burn-in Equipment 2500 Watt +48V Front End Power Supply 90-264 VAC, 47-63 Hz 16A @ 180VAC, Full Load (max) 50A max. cold start (per ETS 300 132-1 and Bellcore specifications) Dual Fused (Line & Neutral) 20 Amp / 250 VAC Type 3AB Axial 0.99 typical complies with IEC555, EN60555-2, EN61000-3-2 92% typical at 230 VAC Full Load Operation (including OR’ing Mosfets) 2500W at High Line Operation (180-264 VAC), 1200W at Low Line Operation (90-132 VAC) +48 VDC (±10% with remote programming) 52A @48V 5VSB@1A, reference to Vout Return ±2% of Vnom for any combination of line, load and temperature Complies with ETS300 132-2, 32dBnrc. Bandwidth: 25Hz - 20kHz. 2mVrms pk-pk with 0.1μF ceramic and 10μF electrolytics caps at the output 5% max deviation Recovery time 300μs @ 50% load step and di/dt < 1A/μs 200kHz (input) / 400kHz (output) 16.8msec (230 VAC full load) ON if >3V or open; OFF if