Data Sheet March 25, 2008
EQD075 Series (Eighth-Brick)DC-DC Converter Power Modules 18- 60Vdc Input; 3.3 to 5.0Vdc Output; 75W RoHS Compliant
Features
Compliant to RoHS EU Directive 2002/95/EC (-Z versions) Compliant to RoHS EU Directive 2002/95/EC with lead solder exemption (non-Z versions) High efficiency – 92% at 5.0Vo, full load, 24Vin Industry standard Eighth brick footprint and pin out 57.9 mm x 22.8 mm x 8.5 mm (2.28 in. x 0.90 in. x 0.335 in.) 3:1 Input voltage range: 18 - 60 Vdc Input under/overvoltage protection Output overcurrent/voltage protection
Applications
Distributed power architectures Wireless Networks Optical and Access Network Equipment Enterprise Networks
Over-temperature protection Tightly regulated output Remote sense No reverse current during output shutdown Negative logic, Remote On/Off Output voltage programmable from 3.0 Vdc to 5.5Vdc Input-to-output isolation (Basic Insulation: 1500V)
Options
Positive logic, Remote On/Off Auto restart after fault protection shutdown Pin length
Wide operating temperature range (-40°C to 85°C) Meets conducted emissions requirements of FCC/EN55022 Class A without external filter Within FCC and VDE Class A Radiated Limits UL* 60950-1Recognized, CSA† C22.2 No. 60950-103 Certified, and VDE‡ 0805:2001-12 (EN60950-1) Licensed Meets the voltage and current requirements for ETSI 300-132-2 and complies with and licensed for Basic insulation rating per EN60950-1 ISO** 9001 and ISO 14001 certified manufacturing facilities
Description
The EQD075 series DC-DC converters are a new generation of open-frame DC/DC power modules designed to support a 3:1 input voltage range, that allows operation in both 24V or 48V nominal input voltage systems, thus eliminating the need for separate power modules for each input voltage range. These single output DC-DC converters operate over an input voltage range of 18 to 60 Vdc. The series is also designed to provide a wide output voltage set/trim range of 3.0 to 5.5Vdc, with output current up to 20A at 3.3Vdc or 15A at 5.0Vdc in an industry standard eighth brick package. The output is isolated from the input, allowing versatile polarity configurations and grounding connections. Built in filtering for both input and output minimizes the need for external filtering.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† ‡
CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards
Document No: DS05-031 ver. 1.2 PDF name: eqd075_ds.pdf
Data Sheet March 25, 2008
EQD075 Series Single Output: Eighth Brick Power Modules: 18-60Vdc Input; 3.3 to 5.0Vdc Output; 75W
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.
Parameter Input Voltage Continuous Transient (100 ms) Operating Ambient Temperature (see Thermal Considerations section) Storage Temperature I/O Isolation (100% factory Hi-Pot tested) Input - Output A 1500 Vdc A Tstg -55 125 °C A A VIN VIN, trans TA -0.3 -0.3 -40 60 75 85 Vdc Vdc °C Device Symbol Min Max Unit
Electrical Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.
Parameter Operating Input Voltage Maximum Input Current (VIN=0 to VIN, max , Vo = Vo,set, IO=IO, max ) Input Stand-by Current Module on / off disabled (VIN = VIN, nom, Vo = 0 V) Input No Load Current Module on / off enabled (VIN = VIN, nom, Io = 0 A) Inrush Transient Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 12μH source impedance; o Ta 25 C, Cin = 33μF) Input Ripple Rejection (100 - 120Hz) A A A A 50 IIN, NL It
2
Device A A
Symbol VIN IIN,max
Min 18
Typ 24/48
Max 60 6
Unit Vdc Adc
A
IIN, Stby
25
mA
110 1 30
mA As mAp-p dB
2
CAUTION: This power module is not internally fused. An input line fuse must always be used.
This power module can be used in a wide variety of applications, ranging from simple standalone operation to being part of a complex power architecture. To preserve maximum flexibility, internal fusing is not included, however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a very fast acting surface mount fuse with a maximum rating of 6.3 A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information.
LINEAGE POWER
2
Data Sheet March 25, 2008
EQD075 Series Single Output: Eighth Brick Power Modules: 18-60Vdc Input; 3.3 to 5.0Vdc Output; 75W
Electrical Specifications (continued)
Parameter Output Voltage Set-point (VIN = VIN, min=24/48, IO =IO, max, TA =25°C) Output Voltage (Over all line, load, and Temp Conditions Until end of life) Output Regulation Line (VIN = VIN, min to VIN, max) Load (IO = IO, min to IO, max) Temperature (Tref =TA, min to TA, max) Output Ripple and Noise on nominal output (VIN =VIN, nom and IO = IO, min to IO, max, Cout = 1μF ceramic // 10μF Tantalum capacitor) 3.3 to 5.0V output RMS (5Hz to 20MHz bandwidth) Peak-to-Peak (5Hz to 20MHz bandwidth) External Capacitance ESR ≥ 10 mΩ Output Current @ Vo = 3.3V @ Vo = 5 V Output Current Limit Inception (Hiccup Mode) (Vo = 95% Vo, set ) Output Short-Circuit Current VO ≤ 250 mV @ 25 C Efficiency VIN= 24V, TA=25°C, IO= IO, max A @ Vo = 3.3V, IO = 20A @ Vo = 5V, IO = 15A VIN= 48V, TA=25°C, IO= IO, max A @ Vo = 3.3V, IO = 20A @ Vo = 5V, IO = 15A Switching Frequency A A A η η fsw 160 88 90 ⎯ ⎯ % % KHz A A η η 87 92 % %
o
Device A
Symbol VO, set
Min -1.6
Typ
Max +1.6
Unit % VO, set
A
VO
-3
-
+3
% VO
A A A
⎯ ⎯ ⎯
0.05 0.05 0.25
0.2 0.2 1
% VO, nom % VO, nom % VO, nom
A A A A A A A CO Io Io IO, lim IO, s/c
⎯ ⎯ 0 0 0 105 ⎯
5 50 ⎯
20 80 5000 20 15
mVrms mVpk-pk μF A dc A dc % Io, max % Io, max
115 ⎯
150 150
LINEAGE POWER
3
Data Sheet March 25, 2008
EQD075 Series Single Output: Eighth Brick Power Modules: 18-60Vdc Input; 3.3 to 5.0Vdc Output; 75W
Electrical Specifications (continued)
Parameter Dynamic Load Response (dIo/dt= 1A / 10μs; VIN = VIN, nom; TA=25°C) Load Change from Io= 50% to 75% of Io,max Peak Deviation Settling Time (Vo