EQW010A0B1-SZ

Data Sheet March 4, 2009 EQW010-040 Series (Eighth-Brick) DC-DC Converter Power Modules 36–75Vdc Input; 1.0 to 12.0Vdc Output; 10 to 40A Output Current Features Compliant to RoHS EU Directive 2002/95/EC Compatible in a Pb-free or SnPb reflow environment High efficiency – 92% at 3.3V full load Industry standard, DOSA compliant, Eighth brick footprint RoHS Compliant Applications Distributed power architectures Wireless networks Access and optical network Equipment Enterprise Networks Latest generation IC’s (DSP, FPGA, ASIC) and Microprocessor powered applications 57.9mm x 22.9mm x 8.5mm (2.28in x 0.9in x 0.335in) Wide Input voltage range: 36-75 Vdc Tightly regulated output Constant switching frequency Positive Remote On/Off logic Input under/over voltage protection Output overcurrent/voltage protection Over-temperature protection Remote sense No minimum load required Options Negative Remote On/Off logic Over current/Over temperature/Over voltage protections (Auto-restart) Heat plate versions (-C, -H) Surface Mount version (-S) No reverse current during output shutdown Output Voltage adjust: 80% to 110% of Vo,nom Operating temperature range (-40°C to 85°C) UL* 60950-1Recognized, CSA C22.2 No. ‡ 60950-1-03 Certified, and VDE 0805:2001-12 (EN60950-1) Licensed CE mark meets 73/23/EEC and 96/68/EEC directives§ Meets the voltage and current requirements for ETSI 300-132-2 and complies with and licensed for Basic insulation rating per EN60950-1 ISO 9001 and ISO 14001 certified manufacturing facilities ** † Description The EQW010/040 series DC-DC converters are designed to provide up to 40A output current in an industry standard eighth brick package. These DC-DC converters operate over an input voltage range of 36 to 75 Vdc and provide a single, precisely-regulated output. The output is isolated from the input, allowing versatile polarity configurations and grounding connections. Built in filtering for both the input and output minimizes the need for external filtering. * UL is a registered trademark of Underwriters Laboratories, Inc. † ‡ § CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. This product is intended for integration into end-user equipment ** ISO is a registered trademark of the International Organization of Standards Document No: DS06-112 ver. 1.19 PDF name: eqw010-040_ds.pdf Data Sheet March 4, 2009 EQW010-040 Series Power Modules 36 – 75Vdc Input; 1.0 to 12.0Vdc Output; 10 to 40A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Input Voltage Continuous Transient (100 ms) Operating Ambient Temperature (see Thermal Considerations section) Storage Temperature I/O Isolation voltage (100% factory Hi-Pot tested) All All Tstg -55 125 1500 °C Vdc All All All VIN VIN,trans TA -0.3 -0.3 -40 80 100 85 Vdc Vdc °C Device Symbol Min Max Unit ⎯ ⎯ Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Operating Input Voltage Maximum Input Current (VIN= VIN, min to VIN, max, IO=IO, max) Input No Load Current (VIN = VIN, nom, IO = 0, module enabled) Input Stand-by Current (VIN = VIN, nom, module disabled) Inrush Transient Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; VIN, min to VIN, max, IO= IOmax ; See Test configuration section) Input Ripple Rejection (120Hz) All It 2 Device All All, except B B All Symbol VIN IIN,max IIN,max IIN,No load Min 36 Typ 48 3.2 3.4 Max 75 3.5 3.7 75 Unit Vdc Adc Adc mA All IIN,stand-by 22 mA 0.5 As 2 All 20 mAp-p All 50 dB CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of sophisticated power architectures. To preserve maximum flexibility, internal fusing is not included, however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a time-delay fuse with a maximum rating of 8 A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information. LINEAGE POWER 2 Data Sheet March 4, 2009 EQW010-040 Series Power Modules 36 – 75Vdc Input; 1.0 to 12.0Vdc Output; 10 to 40A Output Current Electrical Specifications (continued) Parameter Nominal Output Voltage Set-point VIN=VIN, min, IO=IO, max, TA=25°C) Device B A F G Y M P S1R0 Output Voltage (Over all operating input voltage, resistive load, and temperature conditions until end of life) Output Regulation Line (VIN=VIN, min to VIN, max) Load (IO=IO, min to IO, max) Temperature (Tref=TA, min to TA, max) Output Ripple and Noise on nominal output (VIN=VIN, nom ,IO= IO, max , TA=TA, min to TA, max) RMS (5Hz to 20MHz bandwidth) Peak-to-Peak (5Hz to 20MHz bandwidth) RMS (5Hz to 20MHz bandwidth) Peak-to-Peak (5Hz to 20MHz bandwidth) External Capacitance All Symbol VO, set VO, set VO, set VO, set VO, set VO, set VO, set VO, set VO Min 11.76 4.90 3.23 2.45 1.76 1.47 1.18 0.98 -3.0 Typ 12.0 5.0 3.3 2.5 1.8 1.5 1.2 1.0 ⎯ Max 12.24 5.10 3.37 2.55 1.84 1.53 1.22 1.02 +3.0 Unit Vdc Vdc Vdc Vdc Vdc Vdc Vdc Vdc % VO, set B, A, F, G Y, M, P, S1R0 B, A, F, G Y, M, P, S1R0 All ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ 0.2 5 0.2 5 1.0 % VO, set mV % VO, set mV % VO, set B B All, except B All, except B B A F, G, Y, M, P, S1R0 B A F G Y, M, P, S1R0 CO, max CO, max CO, max Io Io Io Io Io ⎯ ⎯ ⎯ ⎯ 0 0 0* 0 0 0 0 0 105 103 ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ 115 115 130 93.0 91.7 92.0 89.8 88.3 87.1 85.0 83.2 420 30 100 25 75 1,500 10,000 20,000 10 20 30 35 40 130 130 150 mVrms mVpk-pk mVrms mVpk-pk μF μF μF Adc Adc Adc Adc Adc % Io % Io Arms % % % % % % % % kHz Output Current Output Current Limit Inception (Hiccup Mode ) (VO= 90% of VO, set) Output Short-Circuit Current (VO≤250mV) ( Hiccup Mode ) Efficiency VIN= VIN, nom, TA=25°C IO=IO, max , VO= VO,set All, except G G All B A F G Y M P S1R0 IO, lim IO, lim IO, s/c η η η η η η η η fsw Switching Frequency All * Note: For 1.0VO (S1R0) and 1.2 VO (P) device codes, external capacitance, CO, should be 1000uF minimum to achieve monotonic start-up with very light load (≤ 2Amp). LINEAGE POWER 3 Data Sheet March 4, 2009 EQW010-040 Series Power Modules 36 – 75Vdc Input; 1.0 to 12.0Vdc Output; 10 to 40A Output Current Electrical Specifications (continued) Parameter Dynamic Load Response (dIo/dt=0.1A/μs; VIN = VIN, nom; TA=25°C) Load Change from Io= 50% to 75% or 25% to 50% of Io,max; Peak Deviation Settling Time (Vo