NSR010A0X4-49Z

Data Sheet August 14, 2009 Naos Raptor 10A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 6Vdc Output;10A Output Current Features Compliant to RoHS EU Directive 2002/95/EC (Z versions) Compatible in a Pb-free or SnPb wave-soldering environment (Z versions) Wide Input voltage range (4.5Vdc-14Vdc) Output voltage programmable from 0.59 Vdc to 6Vdc via external resistor Tunable Loop response TM to optimize dynamic output voltage RoHS Compliant Fixed switching frequency Output overcurrent protection (non-latching) Applications Distributed power architectures Intermediate bus voltage applications Telecommunications equipment Servers and storage applications Networking equipment Industrial applications Over temperature protection Remote On/Off Small size: 10.4 mm x 16.5 mm x 6.84 mm (0.41 in x 0.65 in x 0.27 in) Wide operating temperature range (-40°C to 85°C) UL* 60950-1Recognized, CSA† C22.2 No. 60950-103 Certified, and VDE‡ 0805:2001-12 (EN60950-1) Licensed ISO** 9001 and ISO 14001 certified manufacturing facilities Description The Naos Raptor 10A SIP power modules are non-isolated dc-dc converters in an industry standard package that can deliver up to 10A of output current with a full load efficiency of 89.6% at 3.3Vdc output voltage (VIN = 12Vdc). These modules operate over a wide range of input voltage (VIN = 4.5Vdc-14Vdc) and provide a precisely regulated output voltage from 0.59Vdc to 6Vdc, programmable via an external resistor. Features include remote On/Off, adjustable output voltage, over current and over temperature protection. A new feature, the Tunable LoopTM, allows the user to optimize the dynamic response of the converter to match the load. * UL is a registered trademark of Underwriters Laboratories, Inc. † ‡ CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards Document No: DS06-126 ver. 1.10 PDF name: NSR010A0X_ds.pdf Data Sheet August 14, 2009 Naos Raptor 10A: Non-Isolated DC-DC Power Modules 4.5 – 14Vdc input; 0.59Vdc to 6Vdc Output; 10A output current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Input Voltage Continuous Operating Ambient Temperature (see Thermal Considerations section) Storage Temperature All Tstg -55 125 °C All TA -40 85 °C Device All Symbol VIN Min -0.3 Max 15 Unit Vdc Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Operating Input Voltage Maximum Input Current (VIN=4.5V to 14V, IO=IO, max ) Input No Load Current (VIN = 9Vdc, IO = 0, module enabled) (VIN = 12Vdc, IO = 0, module enabled) Input Stand-by Current (VIN = 12Vdc, module disabled) Inrush Transient Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; VIN =0 to 14V, IO= IOmax ; See Test Configurations) Input Ripple Rejection (120Hz) All All All It 45 40 2 Device All All Symbol VIN IIN,max Min 4.5 Typ 12 Max 14 10 Unit Vdc Adc VO,set = 0.6 Vdc VO,set = 5.0Vdc All IIN,No load IIN,No load IIN,stand-by 36 86 1 mA mA mA 2 1 As mAp-p dB LINEAGE POWER 2 Data Sheet August 14, 2009 Naos Raptor 10A: Non-Isolated DC-DC Power Modules 4.5 – 14Vdc input; 0.59Vdc to 6Vdc Output; 10A output current Electrical Specifications (continued) Parameter Output Voltage Set-point (with 0.5% tolerance for external resistor used to set output voltage) Output Voltage (Over all operating input voltage, resistive load, and temperature conditions until end of life) Adjustment Range Selected by an external resistor Output Regulation (for Vo ≥ 2.5Vdc) Line (VIN=VIN, min to VIN, max) Load (IO=IO, min to IO, max) Output Regulation (for Vo