LTC2150CUJ-12#TRPBF

LTC2152-12/ LTC2151-12/LTC2150-12 Single 12-Bit 250Msps/ 210Msps/170Msps ADCs FEATURES DESCRIPTION 68.5dB SNR nn 90dB SFDR nn Low Power: 347mW/333mW/306mW Total nn Single 1.8V Supply nn DDR LVDS Outputs nn Easy-to-Drive 1.5V P-P Input Range nn 1.25GHz Full Power Bandwidth S/H nn Optional Clock Duty Cycle Stabilizer nn Low Power Sleep and Nap Modes nn Serial SPI Port for Configuration nn Pin-Compatible 14-Bit Versions nn 40-Lead (6mm × 6mm) QFN Package The LTC®2152-12/LTC2151-12/LTC2150-12 are a family of 250Msps/210Msps/170Msps 12-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect for demanding communications applications with AC performance that includes 68.5dB SNR and 90dB spurious free dynamic range (SFDR). The 1.25GHz input bandwidth allows the ADC to undersample high input frequencies with good performance. The latency is only six clock cycles. APPLICATIONS The digital outputs are double-data rate (DDR) LVDS. nn DC specs include ±0.26LSB INL (typ), ±0.16LSB DNL (typ) and no missing codes over temperature. The transition noise is 0.54LSBRMS. The ENC+ and ENC– inputs can be driven differentially with a sine wave, PECL, LVDS, TTL, or CMOS inputs. An optional clock duty cycle stabilizer allows high performance at full speed for a wide range of clock duty cycles. Communications nn Cellular Basestations nn Software Defined Radios nn Medical Imaging nn High Definition Video nn Testing and Measurement Instruments nn L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. TYPICAL APPLICATION LTC2152-12: 32K Point 2-Tone FFT, fIN = 71MHz and 69MHz, 250Msps VDD OVDD CLOCK S/H 12-BIT PIPELINED ADC CORRECTION LOGIC OUTPUT DRIVERS D10_11 • • • D0_1 –20 DDR LVDS OGND CLOCK/DUTY CYCLE CONTROL 21521012 TA01a AMPLITUDE (dBFS) ANALOG INPUT 0 –40 –60 –80 –100 –120 GND 0 20 40 60 80 100 FREQUENCY (MHz) 120 21521012 TA01b 21521012fa For more information www.linear.com/LTC2152-12 1 LTC2152-12/ LTC2151-12/LTC2150-12 ABSOLUTE MAXIMUM RATINGS PIN CONFIGURATION (Notes 1, 2) D8_9– D8_9+ D10_11– D10_11+ GND SDO SDI SCK CS PAR/SER TOP VIEW 40 39 38 37 36 35 34 33 32 31 VDD 1 30 OVDD VDD 2 29 D6_7+ GND 3 28 D6_7– AIN+ 4 27 CLKOUT+ AIN– 5 26 CLKOUT – GND 41 GND 6 25 D4_5+ SENSE 7 24 D4_5– VREF 8 23 D2_3+ VCM 9 22 D2_3– GND 10 21 OGND OVDD D0_1+ D0_1 – NC NC OF + OF – GND ENC– 11 12 13 14 15 16 17 18 19 20 ENC+ Supply Voltage VDD, OVDD................................................. –0.3V to 2V Analog Input Voltage AIN+, AIN –, PAR/SER, SENSE (Note 3)......................... –0.3V to (VDD + 0.2V) Digital Input Voltage ENC+, ENC– (Note 3)................. –0.3V to (VDD + 0.3V) CS, SDI, SCK (Note 4)............................ –0.3V to 3.9V SDO (Note 4).............................................. –0.3V to 3.9V Digital Output Voltage................. –0.3V to (OVDD + 0.3V) Operating Temperature Range LTC2152C, LTC2151C, LTC2150C.............. 0°C to 70°C LTC2152I, LTC2151I, LTC2150I.............–40°C to 85°C Storage Temperature Range................... –65°C to 150°C UJ PACKAGE 40-LEAD (6mm × 6mm) PLASTIC QFN TJMAX = 150°C, θJA = 33°C/W EXPOSED PAD (PIN 41) IS GND, MUST BE SOLDERED TO PCB ORDER INFORMATION LEAD FREE FINISH TAPE AND REEL PART MARKING* PACKAGE DESCRIPTION TEMPERATURE RANGE LTC2152CUJ-12#PBF LTC2152CUJ-12#TRPBF LTC2152UJ-12 40-Lead (6mm × 6mm) Plastic QFN 0°C to 70°C LTC2152IUJ-12#PBF LTC2152IUJ-12#TRPBF LTC2152UJ-12 40-Lead (6mm × 6mm) Plastic QFN –40°C to 85°C LTC2151CUJ-12#PBF LTC2151CUJ-12#TRPBF LTC2151UJ-12 40-Lead (6mm × 6mm) Plastic QFN 0°C to 70°C LTC2151IUJ-12#PBF LTC2151IUJ-12#TRPBF LTC2151UJ-12 40-Lead (6mm × 6mm) Plastic QFN –40°C to 85°C LTC2150CUJ-12#PBF LTC2150CUJ-12#TRPBF LTC2150UJ-12 40-Lead (6mm × 6mm) Plastic QFN 0°C to 70°C LTC2150IUJ-12#PBF LTC2150IUJ-12#TRPBF LTC2150UJ-12 40-Lead (6mm × 6mm) Plastic QFN –40°C to 85°C Consult LTC Marketing for parts specified with wider operating temperature ranges. *The temperature grade is identified by a label on the shipping container. For more information on lead free part marking, go to: http://www.linear.com/leadfree/ For more information on tape and reel specifications, go to: http://www.linear.com/tapeandreel/ 2 21521012fa For more information www.linear.com/LTC2152-12 LTC2152-12/ LTC2151-12/LTC2150-12 CONVERTER CHARACTERISTICS The l denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25°C. (Note 5) PARAMETER CONDITIONS MIN Resolution (No Missing Codes) l LTC2152-12 TYP MAX MIN 12 LTC2151-12 TYP MAX LTC2150-12 MIN TYP MAX 12 UNITS 12 Bits Integral Linearity Error Differential Analog Input (Note 6) l –1.2 ±0.26 1.2 –1.2 ±0.30 1.2 –1.2 ±0.30 1.2 LSB Differential Linearity Error Differential Analog Input l –0.6 ±0.16 0.6 –0.6 ±0.16 0.6 –0.6 ±0.16 0.6 LSB Offset Error (Note 7) l –13 ±5 13 –13 ±5 13 –13 ±5 13 mV Gain Error External Reference l –4 ±1 3 –4 ±1 3 –4 ±1 3 %FS Offset Drift Full-Scale Drift Internal Reference External Reference Transition Noise ±20 ±20 ±20 µV/°C ±30 ±10 ±30 ±10 ±30 ±10 ppm/°C ppm/°C 0.54 0.54 0.54 LSBRMS ANALOG INPUT The l denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25°C. (Note 5) SYMBOL PARAMETER VIN Analog Input Range (AIN+ – AIN–) CONDITIONS MIN TYP MAX UNITS 1.7V < VDD < 1.9V l 1.5 VIN(CM) Analog Input Common Mode (AIN+ + AIN–)/2 VP-P Differential Analog Input (Note 8) l VCM – 20mV VCM VCM + 20mV V VSENSE External Reference Mode External Reference Mode l 1.200 1.250 1.300 V IIN1 Analog Input Leakage Current 0 < AIN+, AIN– < VDD , No Encode l –1 1 µA IIN2 SENSE Input Leakage Current 1.2V < SENSE < 1.3V l –1 1 µA IIN3 PAR/SER Input Leakage Current 0 < PAR/SER < VDD l –1 1 µA tAP Sample-and-Hold Acquisition Delay Time 1 tJITTER Sample-and-Hold Acquisition Delay Jitter 0.15 CMRR Analog Input Common Mode Rejection Ratio BW-3B Full-Power Bandwidth ns psRMS 75 dB 1250 MHz DYNAMIC ACCURACY The l denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25°C. AIN = –1dBFS. (Note 5) SYMBOL PARAMETER CONDITIONS SNR Signal-to-Noise Ratio 15MHz Input 70MHz Input 140MHz Input SFDR Spurious Free Dynamic Range 15MHz Input 2nd or 3rd Harmonic 70MHz Input 140MHz Input Spurious Free Dynamic Range 15MHz Input 4th Harmonic or Higher 70MHz Input 140MHz Input S/(N+D) Crosstalk Signal-to-Noise Plus Distortion Ratio Crosstalk Between Channels 15MHz Input 70MHz Input 140MHz Input Up to 315MHz Input MIN l l l l LTC2152-12 TYP MAX 67.1 68.5 68.4 68.0 72 90.6 88 80 81 98 95 85 66.5 68.5 68.4 67.7 MIN LTC2151-12 TYP MAX 67.1 68.5 68.3 67.9 74 90.1 89 81 82 98 95 85 66.6 68.4 68.3 67.7 –95 –95 LTC2150-12 MIN TYP MAX UNITS 67.3 68.5 68.3 67.8 dBFS dBFS dBFS 76 90 88 80 dBFS dBFS dBFS 83 98 95 84 dBFS dBFS dBFS 66.7 68.4 68.3 67.7 dBFS dBFS dBFS –95 dB 21521012fa For more information www.linear.com/LTC2152-12 3 LTC2152-12/ LTC2151-12/LTC2150-12 INTERNAL REFERENCE CHARACTERISTICS The l denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25°C. (Note 5) PARAMETER CONDITIONS VCM Output Voltage IOUT = 0 MIN TYP MAX 0.439 • VDD – 18mV 0.439 • VDD 0.439 • VDD + 18mV VCM Output Temperature Drift UNITS V ±37 VCM Output Resistance –1mA < IOUT < 1mA VREF Output Voltage IOUT = 0 ppm/°C 4 1.225 Ω 1.250 VREF Output Temperature Drift 1.275 V ±30 VREF Output Resistance –400µA < IOUT < 1mA VREF Line Regulation 1.7V < VDD < 1.9V ppm/°C 7 Ω 0.6 mV/V POWER REQUIREMENTS The l denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25°C. (Note 5) SYMBOL PARAMETER CONDITIONS MIN VDD Analog Supply Voltage (Note 9) l 1.7 OVDD Output Supply Voltage LVDS Mode (Note 9) l 1.7 IVDD Analog Supply Current IOVDD Digital Supply Current PDISS Power Dissipation LTC2152-12 TYP MAX 1.8 MIN 1.9 1.7 1.7 LTC2151-12 TYP MAX 1.8 LTC2150-12 MIN TYP MAX 1.9 1.7 1.7 1.8 UNITS 1.9 V 1.8 1.9 1.8 1.9 1.8 1.9 V l 166 185 158 175 145 159 mA 1.75mA LVDS Mode 3.5mA LVDS Mode l 27 45 32 50 27 44 31 50 25 43 30 48 mA mA 1.75mA LVDS Mode 3.5mA LVDS Mode l 347 380 391 423 333 364 371 405 306 338 340 373 mW mW PNAP Nap Mode Power Clocked at fS(MAX) 105 99 93 mW PSLEEP Sleep Mode Power Clocked at fS(MAX)