LND1117-3.0

• DATA SHEET LND1117 800mA Low Dropout Voltage Regulator GENERAL DESCRIPTION The LND1117 series of positive adjustable and fixed regulators are designed to provide 800mA with higher efficiency than currently available devices. All internal circuitry is designed to operate down to 700 mV input to output differential and the dropout voltage is fully specified as a function of load current. Dropout voltage of the device is 100mV at light loads and rising to 700mV at maximum output current. A second low current input is required to achieve this dropout. The LND1117 can also be used as a single supply device( 3 pin version). On-chip trimming adjusts the reference voltage to 1%. FEATURES • • • • • • • • Adjustable or Fixed Output Output Current of 800mA Low Dropout 700mV at 800mA output current 0.015% Line Regulation 0.01% Load Regulation 100% Thermal limit Burn-In Fast Transient Response Remote Sense TYPICAL APPLICATION DATA 2.5 V, 800mA Regulator APPLICATIONS • • • High Efficiency Linear Regulators Post Regulators for Switching Supplies Adjustable Power Supply VOUT = VREF (1+R2/R1) +IADJ R2 • Linear Dimensions, Inc. • 445 East Ohio Street, Chicago IL 60611 USA • tel 312.321.1810 • fax 312.321.1830 • www.lineardimensions.com • LND1117 PACKAGE INFORMATION 3 LEAD TO –220 (Front view) VIN VOUT ADJ/GND 5 LEAD TO –220 (Front View) Vpower Vcontrol OUTPUT ADJ/GND SENSE ABSOLUTE MAXIMUM RATING SYMBOL PD VIN PARAMETER Power Dissipation Input Voltage Vpower Vcontrol Operating Junction Temperature Range Control Section Power Transistor Storage Temperature Lead Temperature (Soldering,10 sec) MAXIMUM Internally Limited 7 13 UNITS W V TJ 0 to 125 0 to 150 -65 to 150 300 ºC TSTG TLEAD DEVICE SELECTION GUIDE (note 1) DEVICE LND1117 LND1117-1.5 LND1117-2.5 LND1117-2.85 LND1117-3.0 LND1117-3.3 LND1117-3.5 LND1117-5.0 Note 1: Other fixed versions are available Vout=1.5V to 5.0V OUTPUT VOLTAGE Adj. 1.5V 2.5V 2.85V 3.0V 3.3V 3.5V 5.0V • Linear Dimensions, Inc. • 445 East Ohio Street, Chicago IL 60611 USA • tel 312.321.1810 • fax 312.321.1830 • www.lineardimensions.com • LND1117 ELECTRICAL CHARACTERISTICS Parameter Reference Voltage Device LND1117 LND1117-1.5 Test Conditions Vcontrol=2.75V, Vpower=2V,I load=10mA Vcontrol=2.7V to 12V Vpower=3.3V to 5.5V, Iload=10mA to 800mA Vcontrol=4V, Vpower=2V Vcontrol=3V,Vpower2.3, Iload= 0mA to 800mA Vcontrol=5V, Vpower=3.3V Vcontrol=4V, Vpower 3.3, I load= 0mA to 800mA Vcontrol=5.35V, Vpower=3.35V Vcontrol=4.4V, Vpower3.7, I load= 0mA to 800mA Vcontrol=5.5V, Vpower=3.5V Vcontrol=4.5V, Vpower3.8 I load= 0mA to 800mA Vcontrol=5.8V, Vpower=3.8V Vcontrol=4.8V, Vpower4.1, I load= 0mA to 800mA Vcontrol=6V, Vpower=4V Vcontrol=6.5V, Vpower5.8, I load= 0mA to 800mA Vcontrol=7.5V, Vpower=5.5V Vcontrol=6.5V, Vpower5.8, I load= 0mA to 800mA * Min 1.238 1.230 * 1.485 1.475 2.475 2.460 2.821 2.805 2.970 2.950 3.267 3.247 3.465 3.445 4.950 4.920 Typ 1.250 1.250 1.500 1.500 2.500 2.500 2.850 2.850 3.000 3.000 3.300 3.300 3.500 3.500 5.000 5.000 0.04 0.08 1.7 Max 1.262 Units V 1.270 1.515 1.525 2.525 2.540 2.879 2.895 3.030 3.050 3.333 3.353 3.535 3.555 5.050 5.080 0.20 0.40 5 V LND1117-2.5 * V LND11172.85 LND1117-3.0 Output Voltage LND1117-3.5 * V * V * V LND1117-5.0 * V * * * * V % % mA mA Line Regulation Load Regulation Minimum Load Current(Note 2) Control Pin Current (Note 3) Ground Pin Current Adjust Pin Current Current Limit Ripple Rejection All All LND1117 Iload=10mA(1.5V+Vout)