LND48-ADJ

DATA SHEET LND48XX 400mA Low Dropout Voltage Regulators GENERAL DESCRIPTION This series of fixed-voltage monolithic micropower voltage regulators is designed for a wide range of applications. This device is an excellent choice for use in battery-powered application. Furthermore, the quiescent current increases only slightly at dropout, which prolongs battery life. This series of fixed-voltage regulators features very low quiescent current(100mA Typ.) and very low drop output voltage (Typ. 60mV at light load and 420mV at 400mA). This includes a tight initial tolerance of 0.5%typ. Extremely good load and line regulation of 0.05% typ., and very low output temperature coefficient. This series of fixed-voltage regulators is offered in 3-pin TO220 package compatible with other fixed voltage regulators. Adjust model is offered in 5-pin TO220 package and fixed model with shutdown input is offered in 4-pin TO-220 package. FEATURES • • • • • • • • 400mA output within 2% over temperature Very low quiescent current Low dropout voltage (420mV Typ) Extremely tight load and line regulation Very low temperature coefficient Current and thermal limiting Unregulated DC input can withstand – 20V reverse battery and +60V positive transients Direct replacement for SGS-ThomsonL48XX Series, but has lower ground current, higher accuracy of output voltage and extremely tight load and line regulation. The 5 pin version (adjust model) and 4 pin version (fixed model) have a shutdown input. APPLICATIONS • • • High-efficiency linear regulator Battery powered systems Portable/palm top/ notebook Computers Portable consumer equipment Portable instrumentation Automotive Electronics SMPS Post Regulator PIN DIAGRAM Output Common Input • • • • TO – 220 Package • Linear Dimensions, Inc. • 445 East Ohio Street, Chicago IL 60611 USA • tel 312.321.1810 • fax 312.321.1830 • www.lineardimensions.com • LND48XX ABSOLUTE MAXIMUM RATINGS Power Dissipation Lead Temperature(Soldering, 5 seconds) Storage Temperature Range Operating Junction Temperature Range Input Supply Voltage Continuous total dissipation at 25º C free air temperature Continuous total dissipation at (or below) 25º C case temperature Internally Limited 260ºC -65ºC to +150ºC -55ºC to +150ºC -20V to +35V 2W 15W DEVICE SELECTION GUIDE Vout , VOLTS 3.3V* 5V 8V 8.5V 9V 10V 12V 15V Adj. Device LND4833 LND4805 LND4808 LND4885 LND4809 LND4810 LND4812 LND4815 LND48-adj * Other fixed versions are also available Vout=2.0 V to 5.0V Please Consult Linear Dimensions for Information. • Linear Dimensions, Inc. • 445 East Ohio Street, Chicago IL 60611 USA • tel 312.321.1810 • fax 312.321.1830 • www.lineardimensions.com • LND48XX ELECTRICAL CHARACTERISTICS PARAMETER Output Voltage Output Voltage Input Supply Voltage Output Voltage Temperature Coefficient Line Regulation (Note 2) Load Regulation(Note 2) Dropout Voltage(Note 4) Ground Current (Note 5) Dropout Ground Current(Note 5) Current Limit Thermal Regulation (Note 6) Output Noise, 10Hz to 100KHz IL = 100mA Ripple Rejection Ratio Adjust model Reference Voltage Reference Voltage Feedback Pin Bias Current Reference Voltage Temperature Coefficient Feedback Pin Bias Current Temperature coefficient Shutdown Input Input Logic Voltage Shutdown Pin Input Current CONDITIONS -25º C