LT3050MPMSE-3.3-TR

厂商：
LINER
封装：
描述：
LT3050MPMSE-3.3-TR - 100mA, Linear Regulator with Precision Current Limit and Diagnostic Outputs - L...

数据手册：

下载LT3050MPMSE-3.3-TR.pdf

立即购买

详情介绍
数据手册
价格&库存

LT3050MPMSE-3.3-TR 数据手册

FEATURES n n n n n n n n n n n n n n n n LT3050 Series 100mA, Linear Regulator with Precision Current Limit and Diagnostic Outputs DESCRIPTION The LT®3050 series are micro-power, low noise, low dropout voltage (LDO) linear regulators. The devices supply 100mA of output current with a dropout voltage of 340mV. A 10nF bypass capacitor reduces output noise to 30μVRMS in a 10Hz to 100kHz bandwidth and soft-starts the reference. The LT3050’s ±45V input voltage rating combined with its precision current limit and diagnostic functions make the IC an ideal choice for robust, high reliability applications. A single resistor programs the LT3050’s current limit, accurate to ±5% over a wide input voltage and temperature range. A single resistor programs the LT3050’s minimum output current monitor, useful for detecting open-circuit conditions. The current monitor function sources a current equal to 1/100th of output current. A logic FAULT pin asserts low if the LT3050 is in current limit, operating below its minimum output current (open-circuit) or is in thermal shutdown. The LT3050 optimizes stability and transient response with low ESR ceramic capacitors, requiring a minimum of 2.2μF. The LT3050 is available in ﬁxed output voltages of 3.3V and 5V, and as an adjustable version with an output voltage range down to the 0.6V reference.The LT3050 is available in the thermally-enhanced 12-Lead 3mm × 2mm DFN and MSOP packages. L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. Output Current Monitor: 1/100th of IOUT Fault Indicator: Current Limit, Minimum IOUT or Thermal Limit Output Current: 100mA Dropout Voltage: 340mV Input Voltage Range: 1.6V to 45V Programmable Precision Current Limit: ±5% Programmable Minimum IOUT Monitor Low Noise: 30μVRMS (10Hz to 100kHz) Adjustable Output (VREF = VOUT(MIN) = 0.6V) Fixed Output Voltages: 3.3V, 5V Output Tolerance: ±2% Over Line, Load and Temperature Stable with Low ESR, Ceramic Output Capacitors (2.2μF minimum) Shutdown Current:

下载 PDF

LT3050MPMSE-3.3-TR

1. 物料型号： - LT3050系列

2. 器件简介： - LT3050系列是一款微功耗、低噪声、低 dropout 电压（LDO）线性调节器。该器件提供100mA的输出电流，dropout电压为340mV。它具有高精度的电流限制和诊断功能，适用于高可靠性应用。

3. 引脚分配： - REF/BYP（引脚1）：旁路/软启动。 - IN（引脚5、6）：输入。 - OUT（引脚7、8）：输出。 - IMON（引脚9）：最小输出电流编程引脚。 - ADJ（引脚10）：调整。 - FAULT（引脚3）：故障引脚。 - GND（引脚10、暴露的垫片引脚13）：地。 - SHDN（引脚4）：关闭。 - IMAX（引脚11）：精确电流限制编程引脚。

4. 参数特性： - 输出电流监测：IOUT的1/100。 - 故障指示：电流限制、最小Iout或热限制。 - dropout 电压：340mV。 - 输入电压范围：1.6V至45V。 - 可编程精密电流限制：±5%。 - 可编程最小IOUT监测。 - 低噪声：30μVRMS（10Hz至100kHz）。 - 固定输出电压：3.3V、5V。 - 输出公差：±2%，跨线路、负载和温度。

5. 功能详解： - LT3050系列优化了低ESR陶瓷电容器的稳定性和瞬态响应，需要至少2.2μF的最小值。该系列提供固定输出电压3.3V和5V，以及可调版本，输出电压范围低至0.6V参考。LT3050系列提供热增强的12引脚3mm×2mm DFN和MSOP封装。

6. 应用信息： - 保护天线供电、汽车远程信息处理、工业应用（卡车、叉车等）和高可靠性应用。

7. 封装信息： - 12引脚塑料DFN（3mm×2mm）和MSOP封装。

LT3050MPMSE-3.3-TR 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“LT3050MPMSE-3.3-TR”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

LT3050MPMSE-3.3-TR

相关技术文章