LT3082IDDPBF

LT3082 200mA Single Resistor Low Dropout Linear Regulator FEATURES n n n n n n n n n n n n n n DESCRIPTION The LT®3082 is a 200mA low dropout linear regulator that can be paralleled to increase output current or spread heat in surface mounted boards. Architected as a precision current source and voltage follower, this regulator benefits many applications requiring high current, adjustability to zero and no heat sink. The LT3082 withstands reverse input voltages and reverse output-to-input voltages without reverse-current flow. A key feature of the LT3082 is the capability to supply a wide output voltage range. A precision “0” TC 10μA reference current source drives a single resistor to program the output voltage to any level between zero and 38.5V. The LT3082 is stable with only 2.2μF of capacitance on the output; the IC uses small ceramic capacitors that do not require additional ESR as is common with other regulators. Internal protection circuitry includes reverse-battery and reverse-current protection, current limiting and thermal limiting. The LT3082 is offered in the thermally enhanced 8-lead TSOT-23, 3-lead SOT-223 and 8-lead 3mm × 3mm DFN packages. L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. Outputs May Be Paralleled for Higher Output Current or Heat Spreading Maximum Output Current: 200mA Wide Input Voltage Range: 1.2V to 40V Output Adjustable to 0V Stable with Minimum 2.2μF Ceramic Capacitors Single Resistor Sets Output Voltage Initial Set Pin Current Accuracy: 1% Low Output Noise: 33μVRMS (10Hz to 100kHz) Reverse-Battery Protection Reverse-Current Protection