LTC3569IFE-PBF

FEATURES n n n n n n n n n n n n n LTC3569 Triple Buck Regulator With 1.2A and Two 600mA Outputs and Individual Programmable References DESCRIPTION The LTC®3569 contains three monolithic, synchronous step-down DC/DC converters. Intended for medium power applications, it operates over a 2.5V to 5.5V input voltage range. The operating frequency is adjustable from 1MHz to 3MHz, allowing the use of tiny, low cost capacitors and inductors. The three output voltages are independently programmable by toggling the EN pins up to 15 times, lowering the 800mV FB references by 25mV per cycle. The first buck regulator sources load currents up to 1200mA. The other two buck regulators each provide 600mA. The two 600mA buck regulators can also be configured to operate as slave power stages, running in parallel with another internal buck regulator to supply higher load currents. When operating as parallel, slave output stages, discrete external components are shared and available output currents sum together. L, LT, LTC, LTM and Burst Mode are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. Protected by U.S. Patents including 5481178, 6127815, 6304066, 6498466, 6580258, 6611131, 7170195. Three Independent Current Mode Buck DC/DC Regulators (1.2A and 2x 600mA) Single Pin Programmable VFB Servo Voltages from 800mV Down to 425mV (in 25mV Steps) Pull VFB High to Make Each 600mA Buck a Slave for Higher Current Operation Pulse Skip or Burst Mode® Operation Programmable Switching Frequency (1MHz to 3MHz) or Fixed 2.25MHz Synchronizable (1.2MHz to 3MHz) VIN Range 2.5V to 5.5V All Regulators Internally Compensated PGOOD Output Flag Quiescent Current