CNY17-2S

Photocoupler Product Data Sheet CNY17-1 THRU CNY17-4 SERIES Spec No.: DS-70-99-0001 Effective Date: 12/11/2015 Revision: C LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto Photocouplers CNY17-1-V thru CNY17-4-V SERIES 1. DESCRIPTION 1.1 Features      Current transfer ratio (CTR : MIN. 40% at IF = 10mA, VCE = 5V) High collector-emitter voltage VCEO = 70V High input-output isolation voltage Viso = 5,000Vrms Response time (tr : TYP. 5s at VCE = 10V, IC = 2mA, RL = 100) Dual-in-line package : CNY17-1-V, CNY17-2-V, CNY17-3-V, CNY17-4-V    Wide lead spacing package : CNY17-1M-V, CNY17-2M-V, CNY17-3M-V, CNY17-4M-V Surface mounting package : CNY17-1S-V, CNY17-2S-V, CNY17-3S-V, CNY17-4S-V Tape and reel packaging : CNY17-1S-TA-V, CNY17-2S-TA-V, CNY17-3S-TA-V, CNY17-4S-TA-V CNY17-1S-TA1-V, CNY17-2S-TA1-V, CNY17-3S-TA1-V, CNY17-4S-TA1-V  Safety approval * UL approved (No. E113898) * TUV approved (No. R9653630) * CSA approved (No. CA91533-1) * FIMKO approved ( No. 193422-01) * VDE approved ( No. 40015248) * BSI approved (No. 9018-9) * CQC approved (No.CQC11001061921-2)  Creepage distance > 8.0 mm ; Clearance > 8.0 mm  The relevant models are the models Approved by VDE according to DIN EN 60747-5-5 Approved Model No.: CNY17-1-V, CNY17-2-V, CNY17-3-V, CNY17-4-V CNY17-1M-V, CNY17-2M-V, CNY17-3M-V, CNY17-4M-V CNY17-1S-V, CNY17-2S-V, CNY17-3S-V, CNY17-4S-V CNY17-1S-TA-V, CNY17-2S-TA-V, CNY17-3S-TA-V, CNY17-4S-TA-V CNY17-1S-TA1-V, CNY17-2S-TA1-V, CNY17-3S-TA1-V, CNY17-4S-TA1-V VDE approved No.: 40015248 (According to the specification DIN EN 60747-5-5)  Operating isolation voltage VIORM : 850V (Peak)  Transient voltage VTR : 6000V (Peak)  Pollution : 2 (According to VDE 0110-1 : 1997-04)  Clearances distance (Between input and output) : 7.0mm (MIN.)  Creepage distance (Between input and output) : 7.0mm (MIN.)  Isolation thickness between input and output : 0.4mm (MIN.) 1/14 Part No : CNY17-1-V thru CNY17-4-V SERIES BNC-OD-C131/A4 Photocouplers CNY17-1-V thru CNY17-4-V SERIES  Safety limit values Current (Isi) : 400mA (Diode side) Power (Psi) : 700mW (Phototransistor side) Temperature(Tsi) : 175oC In order to keep safety electric isolation of photocoupler, please set the protective circuit to keep within safety limit values when the actual application equipment troubled.     Indication of VDE approval prints " " on sleeve package. RoHS Compliance All materials be used in device are followed EU RoHS directive (No.2002/95/EC). ESD pass HBM 8000V/MM2000V MSL class1 1.2 Applications      Power Supply regulators Digital logic inputs Microprocessor inputs Appliance Sensor Systems Industrial Controls 2/14 Part No : CNY17-1-V thru CNY17-4-V SERIES BNC-OD-C131/A4 Photocouplers CNY17-1-V thru CNY17-4-V SERIES 2. PACKAGE DIMENSIONS 2.1 CNY17-1-V, CNY17-2-V, CNY17-3-V, CNY17-4-V : 2.2 CNY17-1M-V, CNY17-2M-V, CNY17-3M-V, CNY17-4M-V : Notes : 1. Year date code. 2. 2-digit work week. 3. Factory identification mark shall be marked (Y: Thailand, W: China-CZ, X: China-TJ). 4. Model No.: CNY17-1, CNY17-2, CNY17-3, CNY17-4 3/14 Part No : CNY17-1-V thru CNY17-4-V SERIES BNC-OD-C131/A4 Photocouplers CNY17-1-V thru CNY17-4-V SERIES 2.3 CNY17-1S-V, CNY17-2S-V, CNY17-3S-V, CNY17-4S-V : Notes : 1. 2. 3. 4. Year date code. 2-digit work week. Factory identification mark shall be marked (Y: Thailand, W: China-CZ, X: China-TJ). Model No.: CNY17-1, CNY17-2, CNY17-3, CNY17-4 4/14 Part No : CNY17-1-V thru CNY17-4-V SERIES BNC-OD-C131/A4 Photocouplers CNY17-1-V thru CNY17-4-V SERIES 2. TAPING DIMENSIONS CNY17-1S-TA-V, CNY17-2S-TA-V, CNY17-3S-TA-V, CNY17-4S-TA-V : CNY17-1S-TA1-V, CNY17-2S-TA1-V, CNY17-3S-TA1-V, CNY17-4S-TA1-V : Description Symbol Dimension in mm (inch) Tape wide W 16±0.3 (0.63) Pitch of sprocket holes P0 4±0.1 (0.15) F 7.5±0.1 (0.295) P2 2±0.1 (0.079) P1 12±0.1 (0.472) Distance of compartment Distance of compartment to compartment 5/14 Part No : CNY17-1-V thru CNY17-4-V SERIES BNC-OD-C131/A4 Photocouplers CNY17-1-V thru CNY17-4-V SERIES 4. RATING AND CHARACTERISTICS 4.1 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Rating Unit Forward Current IF 60 mA Reverse Voltage VR 6 V Power Dissipation P 100 mW Collector - Emitter Voltage VCEO 70 V Emitter - Collector Voltage VECO 7 V Collector - Base Voltage VCBO 70 V Collector Current IC 150 mA Collector Power Dissipation PC 150 mW Total Power Dissipation Ptot 250 mW *1 Isolation Voltage Viso 5000 Vrms Operating Temperature Topr -55 ~ +100 °C Storage Temperature Tstg -55 ~ +150 °C *2 Soldering Temperature Tsol 260 °C Input Output *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds 6/14 Part No : CNY17-1-V thru CNY17-4-V SERIES BNC-OD-C131/A4 Photocouplers CNY17-1-V thru CNY17-4-V SERIES 4.2 ELECTRICAL OPTICAL CHARACTERISTICS at Ta=25°C PARAMETER INPUT SYMBOL MIN. TYP. MAX. UNIT Forward Voltage VF — 1.45 1.65 V IF=60mA Reverse Current IR — — 10 A VR=6V Terminal Capacitance Ct — — 100 pF V=0, Collector Dark Current ICEO — — 50 nA VCE=10V, BVCEO 70 — — V Collector-Emitter Emitter-Collector Breakdown BVECO 7 — — V BVCBO 70 — — IC=0.1mA V Breakdown Voltage IF=0 40 CNY17-1 — 63 CNY17-2 80 125 CTR *Transfer 100 CNY17-4 160 — 320 — — 0.3 VCE(sat) IF=10mA % CNY17-3 Collector-Emitter TRANSFER IE=10A IF=0 Collector-Base Ratio IF=0 IF=0 Voltage Current f=1KHz IC=0.1mA Breakdown Voltage OUTPUT CONDITIONS VCE=5V 200 IF=10mA V Saturation Voltage IC=2.5mA CHARACTERISTICS Isolation Resistance Riso 100 — — DC500V G 40 ~ 60% R.H. Floating Capacitance Cf — — 2 pF V=0, Response Time (Rise) tr — 5 10 s VCE=10V, Response Time (Fall) tf — 5 10 s RL=100 * CTR  IC f=1MHz IC=2mA  100% IF 7/14 Part No : CNY17-1-V thru CNY17-4-V SERIES BNC-OD-C131/A4 Photocouplers CNY17-1-V thru CNY17-4-V SERIES 4.3 ISOLATION SPECIFICATION ACCORDING TO VDE Parameter Symbol Conditions Rating Unit 55/100/21 - 2 - 850 VPEAK tp=60s, qc