GBU410

GBU404 thru GBU410 REVERSE VOLTAGE – 400 to 1000 Volts FORWARD CURRENT – 4.0 Amperes GLASS PASSIVATED BRIDGE RECTIFIERS FEATURES • Rating to 1000V PRV • Ideal for printed circuit board • Reliable low cost construction utilizing molded plastic technique • UL recognition file # E95060 • The Plastic material, UL flammability classification 94V-0 GBU A C N O N H G I B P - DIM A B C D E F G H I J K L M N O P All ~ ~ K + J N N D L MECHANICAL DATA • Polarity: As marked on Body • Weight: 0.15 ounces,4.0 grams, Approximate • Mounting position : Any E M F GBU MIN MAX 21.80 22.30 18.30 18.80 3.30 3.56 17.50 18.00 0.76 1.00 0.46 0.56 7.40 7.90 3.50 4.10 1.65 2.16 2.25 2.75 1.95 2.35 1.02 1.27 4.83 5.33 7.0° TYPICAL (3.2) x 45° 1.90 PADIUS dimension in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. ABSOLUTE RATINGS SYMBOL GBU404 GBU406 GBU408 GBU410 UNIT Maximum repetitive peak reverse voltage PARAMETER VRRM 400 600 800 1000 V Maximum DC blocking voltage VDC 400 600 800 1000 V With heatsink,@TC =100°C Withoutheatsink,@TC =100°C I(AV) 4.0 2.4 A Peak forward surge current 8.3ms single half @ TA=25°C sine-wave superimposed on rated load @ TA=125°C IFSM 160 150 A Peak forward surge current 1.0ms single half @ TA=25°C sine-wave superimposed on rated load @ TA=125°C IFSM 320 300 A I2t 106 A2S TJ ,TSTG -55 to +150 °C SYMBOL TYP. MAX UNIT VF 1.0 V IR 5 500 uA CJ 40 pF TYP. 15 3.0 3.0 UNIT Average rectified output current per device I 2 t rating for fusing ( t = 8.3ms) Storage,Operating temperature range STATIC ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION Forward voltage (Note1) Leakage current IF = 2A TA = 25°C VR at rated TA = 25°C TA = 125°C (Note1) Typical junction capacitance (Note2) THERMAL CHARACTERISTICS PARAMETER Typical thermal resistance (without heatsink) Typical thermal resistance (Note3) Note : (1) Perform static test after the temperature of oven is steady 20 minutes. (2) Measured at 1.0MHz and applied reverse voltage of 4.0V DC (3) Device mounted on 50 mm * 50 mm *1.6mm Cu Plate heatsink. SYMBOL RthJA RthJL RthJC °C/W REV.13, Mar-2019,KBDJ01 RATING AND CHARACTERISTIC CURVES GBU404 thru GBU410 LEGAL DISCLAIMER NOTICE Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.