LTE-329P4-M

L ITE-ON TECHNOLOGY CORPORATION. Property of Lite-On Only FEATURES * SELECTED TO SPECIFIC ON-LINE INTENSITY AND RADIANT INTENSITY RANGES * LOW COST MINIATURE PLASTIC SIDE LOOKING PACKAGE * MECHANICALLY AND SPECTRALLY MATCHED TO THE LTR-5886DHP4-M SERIES OF PHOTOTRANSISTOR PACKAGE DIMENSIONS NOTES: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25mm(.010") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. Part No. : LTE-329P4-M DATA SHEET (FOR KINPO ONLY) BNS-OD-C131/A4 Page : 1 of 4 L ITE-ON TECHNOLOGY CORPORATION. Property of Lite-On Only ABSOLUTE MAXIMUM RATINGS AT TA=25℃ PARAMETER Power Dissipation Peak Forward Current (300pps, 10μs pulse) Continuous Forward Current Reverse Voltage Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6mm(.063") From Body] MAXIMUM RATING 75 1 50 5 -10℃ to + 50℃ -40℃ to + 70℃ 260℃ for 5 Seconds UNIT mW A mA V Part No. : LTE-329P4-M DATA SHEET (FOR KINPO ONLY) BNS-OD-C131/A4 Page : 2 of 4 L ITE-ON TECHNOLOGY CORPORATION. Property of Lite-On Only ELECTRICAL / OPTICAL CHARACTERISTICS AT TA=25℃ PARAMETER Peak Emission Wavelength Spectral Line Half-Width Forward Voltage Reverse Current Axis Intensity (Light Current) Setting of LITE-ON Production(Average Light SYMBOL MIN. λP Δλ VF IR 0.605 (IL) 0.945 0.550 (IL) 0.787 2θ1/2 R 0.8 930 TYP. 940 50 1.2 MAX. 970 UNIT nm nm TEST BIN CONDITION. No. IF = 20mA IF = 20mA IF = 20mA VR = 5V BINA 1.5 10 0.945 V μA mA 1.30 1.050 mA 1.560 40 1.0 1.2 deg. Current of 2 Phototransister,(IL1+IL2)/2) Axis Intensity (Light Current) Setting of LITE-ON Q.C IF = 4mA Vcc=3.5V BINB BINA BINB (Average Light Current of 2 Phototransister,(IL1+IL2)/2) Viewing Angle (See FIG.6) Axis Intensity Ratio(IL1/IL2) IF = 4mA Vcc=3.5V INFRARED AXIS INTENSITY TEST METHOD Part No. : LTE-329P4-M DATA SHEET (FOR KINPO ONLY) BNS-OD-C131/A4 Page : 3 of 4 L ITE-ON TECHNOLOGY CORPORATION. Property of Lite-On Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTICS CURVES (25℃ Ambient Temperature Unless Otherwise Noted) 1.0 Relative Radiant Intensity Forward Current IF (mA) 60 50 40 30 20 10 0 940 Wavelength (nm) 1040 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta ( o C) 0.5 0 840 FIG.1 SPECTRAL DISTRIBUTION 10 Forward Current (A) -1 FIG.2 FORWARD CURRENT VS. AMBIENT TEMPERATURE 1.2 Output Power Relative To Value at IF=20mA MIN. MAX. 1.0 0.8 0.6 0.4 0.2 0 -20 0 20 40 60 o 10 -2 10 -3 10 -4 0 0.2 0.6 1.0 1.4 80 Forward Voltage (V) Ambient Temperature Ta ( C) FIG.3 FORWARD CURRENT VS. FORWARD VOLTAGE 5.0 Output Power Relative To Value at IF=20mA FIG.4 RELATIVE RADIANT INTENSITY VS. AMBIENT TEMPERATURE 0 Relative Radiant Intensity o 10 o 20 o o 30 4.0 3.0 2.0 1.0 0 0 20 40 60 80 100 40 1.0 0.9 0.8 0.7 50 60 o o o 70 o 80 o 90 0.5 0.3 0.1 0.2 0.4 0.6 o Foward Current (mA) FIG.5 RELATIVE RADIANT INTENSITY VS. FORWARD CURRENT FIG.6 RADIATION DIAGRAM Part No. : LTE-329P4-M DATA SHEET (FOR KINPO ONLY) BNS-OD-C131/A4 Page : 4 of 4