LTP-2P58BF

LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only FEATURES ＊1.947-INCH (49.45-mm) MATRIX HEIGHT. ＊LOW POWER REQUIREMENT. ＊SINGLE PLANE, WIDE VIEWING ANGLE. ＊5×8 ARRAY WITH X-Y SELECT. ＊COMPATIABLE WITH USASCII AND EBCDIC CODES. ＊STACKABLE VERTICALLY AND HORIZONTALLY. ＊EASY MOUNTING ON P.C. BOARD. ＊CATEGORIZED FOR LUMINOUS INTENSITY. ＊LEAD-FREE PACKAGE DESCRIPTION The LTP-2P58BF is a 1.947-inch (49.45-mm) matrix height 5×8 dot matrix displays. This device is Full color applicable displays and has black face and white dots. This device uses AlGaAs RED LED chips (AlGaAs epi on GaAs substrate). This device uses InGaN GREEN LED chips (InGaN epi on SiC substrate). This device uses BLUE LED chips (GaN epi on SiC substrate). DEVICE PART NO. FULL COLOR LTP-2P58BF DESCRIPTION Cathode Column Anode Row PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 1 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only PACKAGE DIMENSIONS NOTES: All dimensions are in millimeters. Tolerances are ± 0.25-mm (0.01“) unless otherwise noted. INTERNAL CIRCUIT DIAGRAM PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 2 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only PIN CONNECTION No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 CONNECTION ANODE ROW 8 ANODE ROW 7 ANODE ROW 6 ANODE ROW 5 CATHODE COLUMN 4 GREEN CATHODE COLUMN 4 BLUE CATHODE COLUMN 4 AlGaAs RED CATHODE COLUMN 5 GREEN CATHODE COLUMN 5 BLUE CATHODE COLUMN 5 AlGaAs RED ANODE ROW 1 ANODE ROW 2 ANODE ROW 3 ANODE ROW 4 CATHODE COLUMN 2 AlGaAs RED CATHODE COLUMN 2 BLUE CATHODE COLUMN 2 GREEN CATHODE COLUMN 1 AlGaAs RED CATHODE COLUMN 1 BLUE CATHODE COLUMN 1 GREEN CATHODE COLUMN 3 GREEN CATHODE COLUMN 3 BLUE CATHODE COLUMN 3 AlGaAs RED PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 3 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only ABSOLUTE MAXIMUM RATINGS PARAMETER Average Power Dissipation Per Dot Peak Forward Current Per Dot ( Frequency 1Khz, 10% duty cycle) Average Forward Current Per Dot Derating Linear From 25℃ Per Dot t Reverse Voltage Per Dot Operating Temperature Range Storage Temperature Range AlGaAs RED 36 125 15 0.2 5 -35 C to +85 C -350C to +850C 0 0 UNIT mW mA mA mA/0C V Solder Temperature: max 2600C for max 3sec at 1.6mm[1/16inch] below seating plane. ELECTRICAL/OPTICAL CHARACTERISTICS AT Ta=25℃ AlGaAs RED PARAMETER Average Luminous Intensity Peak Emission Wavelength Spectral Line Half-Width Dominant Wavelength Forward Voltage any Dot Reverse Current any Dot Luminous Intensity Matching Ratio SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION IV λp ∆λ λd VF IR IV-m 7500 660 35 638 1.8 2.4 100 2:1 µcd nm nm nm V µA Ip=80mA 1/16Duty IF=20mA IF=20mA IF=20mA IF=20mA VR=5V Ip=80mA 1/16Duty Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve. PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 4 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only ABSOLUTE MAXIMUM RATINGS PARAMETER Average Power Dissipation Per Dot Peak Forward Current Per Dot ( Frequency 1Khz, 10% duty cycle) Average Forward Current Per Dot Derating Linear From 25℃ Per Dot Reverse Voltage Per Dot Operating Temperature Range Storage Temperature Range GREEN 70 60 25 0.33 10 -350C to +850C -350C to +850C UNIT mW mA mA mA/0C V Solder Temperature: max 2600C for max 3sec at 1.6mm[1/16inch] below seating plane. ELECTRICAL/OPTICAL CHARACTERISTICS AT Ta=25℃ GREEN PARAMETER Average Luminous Intensity Peak Emission Wavelength Spectral Line Half-Width Dominant Wavelength Forward Voltage any Dot Reverse Current any Dot Luminous Intensity Matching Ratio SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION IV λp ∆λ λd VF IR IV-m 70000 523 36 525 3.5 4 100 2:1 µcd nm nm nm V µA Ip=80mA 1/16Duty IF=20mA IF=20mA IF=20mA IF=20mA VR=10V Ip=80mA 1/16Duty Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve. PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 5 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only ABSOLUTE MAXIMUM RATINGS PARAMETER Average Power Dissipation Per Dot Peak Forward Current Per Dot ( Frequency 1Khz, 35% duty cycle) Average Forward Current Per Dot Derating Linear From 25℃ Per Dot Reverse Voltage Per Dot Operating Temperature Range Storage Temperature Range BLUE 72 60 14 0.19 5 -350C to +850C -350C to +850C UNIT mW mA mA mA/0C V Solder Temperature: max 2600C for max 3sec at 1.6mm[1/16inch] below seating plane. ELECTRICAL/OPTICAL CHARACTERISTICS AT Ta=25℃ BLUE PARAMETER Average Luminous Intensity Peak Emission Wavelength Spectral Line Half-Width Dominant Wavelength Forward Voltage any Dot Reverse Current any Dot Luminous Intensity Matching Ratio SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION IV λp ∆λ λd VF IR IV-m 4800 430 65 468 3.8 4.5 100 2:1 µcd nm nm nm V µA Ip=80mA 1/16Duty IF=20mA IF=20mA IF=20mA IF=20mA VR=5V Ip=80mA 1/16Duty Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve. PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 6 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted) PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 7 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted) PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 8 of 9 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted) PART NO.: LTP-2P58BF BNS-OD-C131/A4 PAGE: 9 of 9