LTS-6980HR

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On y FEATURES ＊0.56 inch (14.22 mm) DIGIT HEIGHT. ＊CONTINUOUS UNIFORM SEGMENTS. ＊LOW POWER REQUIREMENT. ＊EXCELLENT CHARACTERS APPEARANCE. ＊HIGH BRIGHTNESS & HIGH CONTRAST. ＊WIDE VIEWING ANGLE. ＊SOLID STATE RELIABILITY. ＊CATEGORIZED FOR LUMINOUS INTENSITY. DESCRIPTION The LTS-6980HR is a 0.56 inch ( 14.22 mm) height digit displays. This high efficiency red device utilizes LED chips which are made from GaAsP on a transparent GaP substrate, It have red face and red segments. DEVICE PART NO. HI.-EFF. RED LTS-6980HR PART NO.: LTS-6980HR BNS-OD-C131/A4 DESCRIPTION COMMON CATHODE RT. HAND DECIMAL PAGE: 1 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On y PACKAGE DIMENSIONS NOTES: All dimensions are in millimeters. Tolerances are ± 0.25 mm (0.01“) unless otherwise noted. INTERNAL CIRCUIT DIAGRAM PART NO.: LTS-6980HR BNS-OD-C131/A4 PAGE: 2 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On y PIN CONNECTION PART NO.: LTS-6980HR BNS-OD-C131/A4 NO. CONNECTION 1 ANODE E 2 ANODE D 3 COMMON CATHODE 4 ANODE C 5 ANODE R.D.P. 6 ANODE B 7 ANODE A 8 COMMON CATHODE 9 ANODE F 10 ANODE G PAGE: 3 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On y ABSOLUTE MAXIMUM RATING AT Ta=25oC PARAMETER MAXIMUM RATING UNIT Power Dissipation Per Segment 75 mW Peak Forward Current Per Segment ( 1/10 Duty Cycle, 0.1ms Pulse Width ) 100 mA Continuous Forward Current Per Segment Derating Linear From 25℃ Per Segment 25 0.33 mA mA/℃ Reverse Voltage Per Segment 5 -35℃ to +85℃ Operating Temperature Range V -35℃ to +85℃ Storage Temperature Range Solder Temperature: max 260℃ for max 3sec at 1.6mm[1/16inch] below seating plane. ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION 2400 µcd IF=10mA λp 635 nm IF=20mA Spectral Line Half-Width ∆λ 40 nm IF=20mA Dominant Wavelength λd 623 nm IF=20mA Forward Voltage Per Segment VF 2.0 2.6 V IF=20mA Reverse Current Per Segment IR 100 µA VR=5V IV-m 2:1 Average Luminous Intensity IV Peak Emission Wavelength Luminous Intensity Matching Ratio 800 IF=10mA Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve. PART NO.: LTS-6980HR BNS-OD-C131/A4 PAGE: 4 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On y TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted) PART NO.: LTS-6980HR BNS-OD-C131/A4 PAGE: 5 of 5