LTV-3063

Photocoupler Product Data Sheet LTV-3063 Spec No. :DS70-2014-0024 Effective Date: 04/13/2021 Revision: B LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto Photocoupler LTV-306X series 1. DESCRIPTION 1.1 Features  Isolation voltage between input and output Viso : 3,750Vrms  4pin MFP zero-cross optoisolators triac driver output         High repetitive peak off-state voltage VDRM : Min. 600V High critical rate of rise of off-state voltage ( dV/dt : MIN. 1000V / µs ) Mini-flat package : 2.0mm profile : LTV-3061, LTV-3062, LTV-3063 Safety approval UL 1577 cUL CA5A VDE DIN EN60747-5-5 (VDE 0884-5) RoHS Compliance All materials be used in device are followed EU RoHS directive (No.2002/95/EC). ESD pass HBM 8000V / MM2000V MSL class1 Halogen free option 1.2 Applications     Motor Controls Solid state relays For triggering high power thyristor and triac Household use equipment 1/12 Part No.: LTV-306X series BNC-OD-FC002/A4 Rev. : -B Photocoupler LTV-306X series 2. PACKAGE DIMENSIONS 2.1 LTV-306X series Notes : 1. 1-digit year code, Example : 2010 = A 2-digit work week ranging from ‘01’ to ‘53’ 2. Model No. : 3061 / 3062 / 3063 3. Factory identification mark (X: China-TJ) 4. “4”or”V” for VDE option. 5. “●” for halogen free option. *All dimensions in millimeters. 2/12 Part No.: LTV-306X series BNC-OD-FC002/A4 Rev. : -B Photocoupler LTV-306X series 3. TAPING DIMENSIONS 3.1 LTV-306X-TP 3.2 LTV-306X Description Symbol Dimension in mm (inch) Tape wide W 12±0.3 (0.472) Pitch of sprocket holes P0 4±0.1 (0.157) Distance of compartment Distance of compartment to compartment F 5.5±0.1 (0.217) P2 2±0.1 (0.079) P1 8±0.1 (0.315) 3.3 Quantities Per Reel Package Type LTV-306X series Quantities (pcs) 3000 3/12 Part No.: LTV-306X series BNC-OD-FC002/A4 Rev. : -B Photocoupler LTV-306X series 4. RATING AND CHARACTERISTICS 4.1 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Rating Unit Forward Current IF 50 mA Reverse Voltage VR 6 V Power Dissipation PD 70 mW Junction Temperature TJ 125 Off-State Output Terminal Voltage VDRM 600 V Peak Repetitive Surge Current ( PW=1ms, 120pps ) VTSM 1 A Collector Power Dissipation PC 300 mW Junction Temperature TJ 125 Total Power Dissipation Ptot 330 mW Isolation Voltage Viso 3750 Vrms Ambient Operating Temperature Range TA -55 ~ +115 o C Storage Temperature Tstg -55 ~ +150 o C Soldering Temperature TL 260 o C Input o C Output *1. *2. *1. AC For 1 Minute, o C R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds 4/12 Part No.: LTV-306X series BNC-OD-FC002/A4 Rev. : -B Photocoupler LTV-306X series 4.2 Recommended Operating Conditions (Note) Characteristics Supply Voltage Symbol Min. Typ. Max. Unit VAC - - 240 Vac 22.5 25 30 mA 15 20 30 mA 7.5 10 30 mA -25 - 85 °C LTV-3061 Forward Current LTV-3062 IF LTV-3063 Operating Temperature Topr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 5/12 Part No.: LTV-306X series BNC-OD-FC002/A4 Rev. : -B Photocoupler LTV-306X series 4.2 ELECTRICAL OPTICAL CHARACTERISTICS at Ta=25°C Parameter Symbol Min. Typ. Max. Unit Forward Voltage VF — 1.2 1.4 V IF=20mA Reverse Current IR — 0.05 10 µA VR=6V IDRM — — 500 nA VDRM=600V VTM — — 3.0 V ITM=100 mA Peak dv/dt 1000 — — V/µs — — 15 — — 10 Test Condition Input *1 Peak Blocking Current, Either Direction Peak On-State Voltage, Either Output Direction *2 Critical Rate of Rise of Off-State Voltage Led Trigger Current, LTV-3061 Main Terminal Current Required to LTV-3062 IFT mA Voltage = 3V Latch Output, Either COUPLED Direction LTV-3063 Holding Current, Either Direction IH — — 5 — 200 — µA IF=Rated IFT, MT1MT2 Voltage above Inhibit Voltage VINH — 5 20 Volts which ZERO device will not trigger CROSSING Leakage in Inhibited State IDRM2 — — 500 µA IF = Rated IFT, Rated VDRM , Off State *1 Test voltage must be applied within dv/dt rating. *2 This is static dv/dt. Commutating dv/dt is a function of the load-driving thyristor(s) only. 6/12 Part No.: LTV-306X series BNC-OD-FC002/A4 Rev. : -B Photocoupler LTV-306X series 5. CHARACTERISTICS CURVES (TYPICAL PERFORMANCE) 150 ITRMS - R.M.S On-State Current (mA) IF - Input forward Current - (mA) 60 50 40 30 20 10 0 -60 -40 -20 0 20 40 60 80 100 125 100 75 50 25 0 120 -60 -40 TA - Ambient Temperature - oC 0 20 40 60 80 100 120 TA - Ambient Temperature - oC Fig.1 Forward current vs. TA Fig 2 On-state current vs. TA 100 2 VTM=3V Normalized to TA =25oC 1.8 1.6 IF - Forward Current - mA N.IFT - Normalized Trigger LED Current -20 1.4 1.2 1 0.8 0.6 0.4 TA = 115oC TA = 75oC TA = 25oC T A = 0o C TA = -55oC 10 1 0.2 0 0.1 -60 -40 -20 0 20 40 60 80 100 120 0.6 0.8 TA - Ambient Temperature - oC Fig 3. Normalized IFT vs. TA 1.4 1.6 2 Normalized to TA =25oC 1 -40 -20 0 20 40 60 80 TA - Ambient Temperature - oC Fig 5. Normalized IH vs. TA 100 120 VTM - Peak On-State voltage - V N.IH - Normalized Holding Current 1.2 Fig 4. IF vs. VF 10 0.1 -60 1 VF - Forward Voltage - V ITM = 100mA 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 -60 -40 -20 0 20 40 60 80 100 120 TA - Ambient Temperature - oC Fig 6. Normalized VTM vs. TA 7/12 Part No.: LTV-306X series BNC-OD-FC002/A4 Rev. : -B Photocoupler LTV-306X series 1000 VDRM=Rated ITM - On-State Current - mA IDRM - Peak off-state Current - nA 1000 100 10 1 0.1 -60 -40 -20 0 20 40 60 80 100 1 N.VINH - Normalized Inhibit Voltage N. IDRM2 - Normalized Peak Off-state Current - nA IF= Rated IFT Vdrm= 600V 1.4 1.2 1 0.8 0.6 0.4 0.2 -20 0 20 40 60 80 TA - Ambient Temperature - oC Fig.9 Normalized IDRM2 vs. TA 1.5 2 2.5 3 Fig.8 Normalized ITM vs. VTM 2 -40 10 VTM - On-State Voltage - V Fig.7 Normalized IDRM vs. TA 0 -60 100 1 120 TA - Ambient Temperature - oC 1.8 1.6 IF=Rated IFT TA = 25oC 100 120 2 IF= Rated IFT 1.8 Normalized to TA =25oC 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 -60 -40 -20 0 20 40 60 80 100 120 TA - Ambient Temperature - oC Fig.10 Normalized VINH vs. TA 8/12 Part No.: LTV-306X series BNC-OD-FC002/A4 Rev. : -B Photocoupler LTV-306X series 6. TEMPERATURE PROFILE OF SOLDERING 6.1 IR Reflow soldering (JEDEC-STD-020E compliant) One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three times. Profile item Conditions Preheat - Temperature Min (TSmin) 150˚C - Temperature Max (TSmax) 200˚C - Time (min to max) (ts) 90±30 sec Soldering zone - Temperature (TL) 217˚C - Time (tL) 60 sec Peak Temperature (TP) 260˚C Ramp-up rate 3˚C / sec max. Ramp-down rate 3~6˚C / sec 20 sec Temperature ( C) Ramp-up TP 260 C TL 217 C Tsmax 200 C Ramp-down 60 sec Tsmin 150 C tL (Soldering) 25 C 60 ~ 120 sec ts (Preheat) 35~70 sec 9/12 Time (sec) Part No.: LTV-306X series BNC-OD-FC002/A4 Rev. : -B Photocoupler LTV-306X series 6.2 Wave soldering (JEDEC22A111 compliant) One time soldering is recommended within the condition of temperature. Temperature: 260+0/-5˚C Time: 10 sec. Preheat temperature:25 to 140˚C Preheat time: 30 to 80 sec. 6.3 Hand soldering by soldering iron Allow single lead soldering in every single process. One time soldering is recommended. Temperature: 380+0/-5˚C Time: 3 sec max. 10/12 Part No.: LTV-306X series BNC-OD-FC002/A4 Rev. : -B Photocoupler LTV-306X series 7. RRECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit: mm 0.8 1.5 6.25 2.54 11/12 Part No.: LTV-306X series BNC-OD-FC002/A4 Rev. : -B Photocoupler LTV-306X series 8. NAMING RULE LTV-306(X)(1)-G DEVICE PART NUMBER Please refer to Electrical Optical Characteristics Table on Page 5 (1) TAPING TYPE (TP, TP1) (2) Halogen free Example : LTV-3061-TP1-G LTV306(X)(1)-V-G DEVICE PART NUMBER Please refer to Electrical Optical Characteristics Table on Page 5 (1) TAPING TYPE (TP, TP1) (2) VDE option (3) Halogen free Example : LTV3061TP1-V-G 9. NOTES  LiteOn is continually improving the quality, reliability, function or design and LiteOn reserves the right to make changes without further notices.  The products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio/visual equipment, electrical application and instrumentation.  For equipment/devices where high reliability or safety is required, such as space applications, nuclear power control equipment, medical equipment, etc, please contact our sales representatives.  When requiring a device for any ”specific” application, please contact our sales in advice.  If there are any questions about the contents of this publication, please contact us at your convenience.  The contents described herein are subject to change without prior notice.  Immerge unit’s body in solder paste is not recommended. 12/12 Part No.: LTV-306X series BNC-OD-FC002/A4 Rev. : -B