LTV-356T-B

Photocoupler Product Data Sheet LTV-356T Spec No.: DS70-2001-010 Effective Date: 05/28/2014 Revision: K LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto Photocoupler LTV-356T 1. DESCRIPTION 1.1 Features        Current transfer ratio ( CTR : MIN. 50% at IF = 5mA, VCE = 5V ) High input-output isolation voltage ( Viso = 3,750Vrms ) High collector-emitter voltage ( VCEO = 80V ) Subminiature type (The volume is smaller than that of conventional DIP type by as far as 30%) Employs double transfer mold technology Mini-flat package : 2.0mm profile : LTV-356T Safety approval UL 1577 VDE DIN EN60747-5-5 (VDE 0884-5) , CSA CA5A CQC GB4943.1-2011/ GB8898-2011 FIMKO/DEMKO/SEMKO/NEMKO  RoHS Compliance All materials be used in device are followed EU RoHS directive (No.2002/95/EC).  ESD pass HBM 8000V/ MM2000V/ CDM2000V  MSL class1 1.2 Applications  Hybrid substrates that require high density mounting.  Programmable controllers 1/11 Part No. LTV-356T BNC-OD-FC002/A4 Photocoupler LTV-356T 2. PACKAGE DIMENSIONS Part No : LTV-356T Notes : 1. 2. 3. 4. 3-digit date code. Factory identification mark shall be marked (W: China -CZ, X: China -TJ, Y: Thailand) Rank shall be or shall not be marked. “●” for halogen free option. 5. “4”or”V” for VDE option. 2/11 Part No. LTV-356T BNC-OD-FC002/A4 Photocoupler LTV-356T 3. TAPING DIMENSIONS P/N : LTV-356T TP1 MINI FLAT (3000pcs/reel): No Suffix & Suffix “TP1” Description Symbol Dimension in mm (inch) Tape wide W 12±0.3 (0.47) Pitch of sprocket holes P0 4±0.1 (0.15) F 5.5±0.1 (0.217) P2 2±0.1 (0.079) P1 8±0.1 (0.315) Distance of compartment Distance of compartment to compartment 3/11 Part No. LTV-356T BNC-OD-FC002/A4 Photocoupler LTV-356T 4. RATING AND CHARACTERISTICS 4.1 Absolute Maximum Ratings at Ta=25°C Parameter Input Symbol Rating Unit Forward Current IF 50 mA Reverse Voltage VR 6 V Power Dissipation P 70 mW Collector - Emitter Voltage VCEO 80 V Emitter - Collector Voltage VECO 6 V Collector Current IC 50 mA Collector Power Dissipation PC 150 mW Total Power Dissipation Ptot 170 mW Isolation Voltage Viso 3750 Vrms Operating Temperature Topr -55 ~ +110 o C Storage Temperature Tstg -55 ~ +150 o C 260 o C Output 1. 2. 1. AC For 1 Minute, Soldering Temperature Tsol R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. 2. For 10 Seconds 4/11 Part No. LTV-356T BNC-OD-FC002/A4 Photocoupler LTV-356T 4.2 ELECTRICAL OPTICAL CHARACTERISTICS at Ta=25°C Parameter Input Symbol Min. Typ. Max. Unit Forward Voltage VF — 1.2 1.4 V IF=20mA Reverse Current IR — — 10 A VR=4V Terminal Capacitance Ct — 30 250 pF V=0, f=1KHz Collector Dark Current ICEO — — 100 nA VCE=20V, IF=0 BVCEO 80 — — V IC=0.1mA, IF=0 BVECO 6 — — V IE=10A, IF=0 IC 2.5 — 30 mA CTR 50 — 600 % VCE(sat) — — 0.2 V Collector-Emitter Output Test Condition Breakdown Voltage Emitter-Collector Breakdown Voltage Collector Current 1. Current Transfer Ratio Collector-Emitter VCE=5V IF=20mA Saturation Voltage IC=1mA TRANSFER Isolation Resistance IF=5mA Riso 51010 — 11011  DC500V, 40 ~ 60% R.H. CHARACTERISTICS Floating Capacitance Cf — 0.6 1 pF 40 ~ 60% R.H. V=0, f=1MHz Response Time (Rise) tr — 4 18 s VCE=2V, Response Time (Fall) tf — 3 18 s IC=2mA 1. CTR  IC RL=100,  100% IF 5/11 Part No. LTV-356T BNC-OD-FC002/A4 Photocoupler LTV-356T 5. RANK TABLE OF CURRENT TRANSFER RATIO CTR Parameter DC Current Transfer Ratio CTR Rank Min Max A 80 160 B 130 260 C 200 400 D 300 600 A or B or C or D or No mark 50 600 Condition IF=5mA, VCE=5V, Ta=25oC 6/11 Part No. LTV-356T BNC-OD-FC002/A4 Photocoupler LTV-356T 6. CHARACTERISTICS CURVES F ig .1 F o rw a rd C u rre n t vs. F ig .2 C o lle cto r P o w e r D is sip a tio n vs. A m b ie n t T e m p e ra tu re A m b ie n t T e m p e ra tu re C o llec to r p o w er d issip atio n Pc (m W) 60 Fo rward c urrent I F (m A) 50 40 30 20 10 0 -55 0 25 50 75 100 200 150 100 50 0 125 -55 0 25 50 75 100 o Am b ient tem p erature Ta ( C ) F ig .3 C o lle cto r-e m itte r S a tu ra tio n F ig .4 F o rw a rd C u rre n t v s. F o rw a rd V o lta g e 500 O Ta= 25 C o Fo rward c urrent I F (m A) 5m A 7m A 3m A Ic = 0.5m A C o llec o tr-em itter saturatio n vo ltag e VC E (sat) (V) 5 1m A V o lta g e v s. F o rw a rd C u rre n t 6 4 3 2 Ta= 75 C 50 C o 200 o 25 C 0 C -25 C o 100 o 50 20 10 5 1 2 0 1 0 5 10 15 0 1.0 0.5 Fo rw ard c urrent I F (m A) 1.5 2.0 2.5 3.0 Fo rw ard vo ltag e V F (V) F ig .5 C u rre n t T ra n s fe r R a tio vs. F ig .6 C o lle cto r C u rre n t vs. F o rw a rd C u rre n t C o lle cto r-e m itte r V o lta g e 200 50 VCE = 5V Ta= 25 C 180 IF = 30m A o 160 140 120 100 80 60 40 Ta= 25 C 25m A o C o llec to r c urrent Ic (m A) C urrent transfer ratio C TR (%) 125 o Am b ient tem p erature Ta ( C ) 40 20m A 30 15m A Pc (M AX.) 20 10m A 10 5m A 20 0 0 1 2 5 10 20 Fo rw ard c urrent I F (m A) 50 0 1 2 3 4 5 6 7 8 9 C o llec to r-em itter vo ltag e V C E (V) 7/11 Part No. LTV-356T BNC-OD-FC002/A4 Photocoupler LTV-356T F ig .7 R e la tiv e C u rre n t T ra n sfe r R a tio F ig .8 C o lle c to r-e m itte r S a tu ra tio n V o lta g e v s . A m b ie n t T e m p e ra tu re v s . A m b ie n t T e m p e ra tu re 1 0.1 IF = 5mA, VCE = 5V, TA = 25oC IF = 25mA 100 I = 10mA F IF = 5mA 50 IF = 1mA IF = 0.5mA 0 -60 -40 20 -20 40 60 80 100 0 20 40 60 80 Am b ient tem p erature Ta ( C ) TA - Ambient Temperature - oC 120 100 o F ig .9 C o lle cto r D a rk C u rre n t vs. 0.10 0.2 C o llec to r-em itter saturatio n vo ltag e VC E (sat) (V) 10 IF = 1m A, V C E = to 5V Normalized VCE(sat) - Saturated Collector-Emitter Voltage - V Relative c urrent transfer ratio (%) 100 0.16 0.08 IF = 5mA, IC = 1mA 0.14 0.12 0.1 0.06 IF = 10mA, IC = 1mA 0.04 0.08 0.06 0.02 IF = 20mA, IC = 1mA 0.04 0.02 0 20 0 40 60 80 100 120 o 120 -60 -40 Am Ta ( C )60 -20b ient 0tem p erature 20 40 80 TA - Ambient Temperature - oC 100 F ig .1 0 R e sp o n se T im e vs . L o a d R e sista n ce 500 10000 C o llec to r d ark c urrent I C EO (nA) IF = 20m A IC = 1m A 0.18 A m b ie n t T e m p e ra tu re VC E = 20V 200 VC E = 2V IC = 2m A Ta= 25 C o 100 Resp o nse tim e ( s) 1000 100 10 50 tr 20 tf 10 td 5 ts 2 1 0.5 1 20 40 60 80 100 0.2 0.05 120 o 0.1 0.2 0.5 1 2 5 10 Lo ad resistanc e R L (k ) Am b ient tem p erature Ta ( C ) F ig .1 1 F re q u e n c y R e sp o n se T e s t C irc u it fo r R e sp o n se T im e Vc c VC E = 2V IC = 2m A Ta= 25 C o 0 Vo ltag e g ain Av (d B) IC - Collector Current - mA 150 Inp ut O utp ut Inp ut RD RL 10% O utp ut 90% ts td 100  10 R L = 10k  tr tf 1k  T e s t C irc u it fo r F re q u e n c y R e sp o n se Vc c 20 RD 0.5 1 2 5 10 20 50 100 RL O utp ut 500 Freq uenc y f (kH z) 8/11 Part No. LTV-356T BNC-OD-FC002/A4 120 Photocoupler LTV-356T 7. TEMPERATURE PROFILE OF SOLDERING 7.1 IR Reflow soldering (JEDEC-STD-020C compliant) One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three times. Profile item Conditions Preheat - Temperature Min (TSmin) 150˚C - Temperature Max (TSmax) 200˚C - Time (min to max) (ts) 90±30 sec Soldering zone - Temperature (TL) 217˚C - Time (tL) 60 ~ 100 sec Peak Temperature (TP) 260˚C 3˚C / sec max. Ramp-up rate 3~6˚C / sec Ramp-down rate 2 0 se c T e m p e ra tu re ( C ) R a m p -u p TP 260 C TL 217 C R a m p -d o w n T sm a x 2 0 0 C 6 0 -1 0 0 se c T sm in 150 C tL (S o ld e rin g ) 25 C T im e (s e c) 6 0 ~ 1 2 0 se c ts (P re h e a t) 9/11 Part No. LTV-356T BNC-OD-FC002/A4 Photocoupler LTV-356T 7.2 Wave soldering (JEDEC22A111 compliant) One time soldering is recommended within the condition of temperature. Temperature: 260+0/-5˚C Time: 10 sec. Preheat temperature:25 to 140˚C Preheat time: 30 to 80 sec. 7.3 Hand soldering by soldering iron Allow single lead soldering in every single process. One time soldering is recommended. Temperature: 380+0/-5˚C Time: 3 sec max. 10/11 Part No. LTV-356T BNC-OD-FC002/A4 Photocoupler LTV-356T 8. RRECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit: mm 9. Notes:  LiteOn is continually improving the quality, reliability, function or design and LiteOn reserves the right to make changes without further notices.  The products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio/visual equipment, electrical application and instrumentation.  For equipment/devices where high reliability or safety is required, such as space applications, nuclear power control equipment, medical equipment, etc, please contact our sales representatives.  When requiring a device for any ”specific” application, please contact our sales in advice.  If there are any questions about the contents of this publication, please contact us at your convenience.  The contents described herein are subject to change without prior notice.  Immerge unit’s body in solder paste is not recommended. 11/11 Part No. LTV-356T BNC-OD-FC002/A4