LTV-715FS-TA1

Photocoupler Product Data Sheet LTV-715F (M, S, S-TA, S-TA1) series Spec No.: DS-70-99-0006 Effective Date: 07/28/2016 Revision: C LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto Photocoupler LTV-715F (M, S, S-TA, S-TA1) series 1. DESCRIPTION 1.1 Features  Current transfer ratio ( CTR : MIN. 600% at IF = 1mA, VCE = 2V )  High input-output isolation voltage (VISO=5,000Vrms)  Dual-in-line package LTV-715F  Wide lead spacing package LTV-715FM  Surface mounting package LTV-715FS  Tape and reel packaging LTV-715FS-TA, LTV-715FS-TA1  Safety approval * UL approved (No. E113898) * TUV approved (No. R9653630) * CSA approved (No. CA91533-1) * FIMKO approved (No. 202944) * NEMKO approved (No. P98101737) * DEMKO approved (No. 307925) * SEMKO approved (No. 9833170 / 01) * VDE approved (No. 094722)  RoHS Compliance All materials be used in device are followed EU RoHS directive (No.2002/95/EC).  ESD pass HBM 8000V/MM2000V  MSL class1 1/12 Part No.: LTV-715F (M, S, S-TA, S-TA1) series BNC-OD-FC002/A4 Rev.: - Photocoupler LTV-715F (M, S, S-TA, S-TA1) series 2. PACKAGE DIMENSIONS 2.1 LTV-715F 2.2 LTV-715FM 2.3 LTV-715FS Notes : 1. Year date code. 2. 2-digit work week. 3. Factory identification mark shall be marked (Y: Thailand, W: China-CZ). 4. For VDE option. Dimensions in millimeters (inches) 2/12 Part No.: LTV-715F (M, S, S-TA, S-TA1) series BNC-OD-FC002/A4 Rev.: - Photocoupler LTV-715F (M, S, S-TA, S-TA1) series 3. TAPING DIMENSIONS 3.1 LTV-715FS-TA 3.2 LTV-715FS-TA1 Description Symbol Dimension in mm (inch) Tape wide W 16±0.3 (0.63) Pitch of sprocket holes P0 4±0.1 (0.15) F 7.5±0.1 (0.295) P2 2±0.1 (0.079) P1 12±0.1 (0.472) Distance of compartment Distance of compartment to compartment 3.3 Quantities Per Reel Package Type TA / TA1 Quantities (pcs) 1000 3/12 Part No.: LTV-715F (M, S, S-TA, S-TA1) series BNC-OD-FC002/A4 Rev.: - Photocoupler LTV-715F (M, S, S-TA, S-TA1) series 4. RATING AND CHARACTERISTICS 4.1 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Rating Unit Forward Current IF 50 mA Reverse Voltage VR 6 V Power Dissipation P 70 mW Junction Temperature TJ 125 Collector - Emitter Voltage VCEO 35 V Emitter - Collector Voltage VECO 6 V Collector Current IC 80 mA Collector Power Dissipation PC 150 mW Total Power Dissipation Ptot 170 mW Isolation Voltage Viso 5000 Vrms Operating Temperature Topr -25 ~ +100 o C C C Input o C Output 1. 2. 1. AC For 1 Minute, Storage Temperature Tstg -40 ~ +125 o Soldering Temperature Tsol 260 o R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. 2. For 10 Seconds 4/12 Part No.: LTV-715F (M, S, S-TA, S-TA1) series BNC-OD-FC002/A4 Rev.: - Photocoupler LTV-715F (M, S, S-TA, S-TA1) series 4.2 ELECTRICAL OPTICAL CHARACTERISTICS at Ta=25°C Input Parameter Symbol Min. Typ. Max. Unit Forward Voltage VF — 1.2 1.4 V IF=10mA Reverse Current IR — — 10 A VR=4V Terminal Capacitance C — 30 250 pF V=0, f=1MHz Collector Dark Current ICEO — — 1000 nA VCE=10V, BVCEO 35 — — V IC=0.1mA, IF=0 BVECO 6 — — V IE=10A, IF=0 IC 6 16 75 mA Collector-Emitter Output Test Condition IF5=0 Breakdown Voltage Emitter-Collector Breakdown Voltage Collector Current IF=1mA, VCE=2V 1. Current Transfer Ratio CTR 600 1600 7500 % VCE(sat) — — 1.0 V Collector-Emitter Couple IF=20mA Saturation Voltage Isolation Resistance IC=5mA RISO 5x1010 1011 — DC500V,  40 ~ 60%.R.H. Floating Capacitance Cf — 0.6 1 pF Cut-Off Frequency fc — 6 — kHz 40 ~f=1MHz 60% R.H. V=0, VCE=2V, IC=20mA RL=100Ω, -3dB 1. CTR  Response Time (Rise) tr — 60 250 s VCE=2V, IC=10mA Response Time (Fall) tf — 53 250 s RL=100Ω IC IF  100% 5/12 Part No.: LTV-715F (M, S, S-TA, S-TA1) series BNC-OD-FC002/A4 Rev.: - Photocoupler LTV-715F (M, S, S-TA, S-TA1) series 5. CHARACTERISTICS CURVES Fig.1 Forward Current vs. Ambient Temperature Fig.2 Collector Power Dissipation vs. Ambient Temperature Collector power dissipation Pc (mW) Forward current I F (mA) 60 50 40 30 20 10 0 -25 0 25 50 75 100 125 200 150 100 50 0 -25 o 0 25 50 75 100 125 o Ambient temperature Ta ( C) Ambient temperature Ta ( C) Fig.3 Current Transfer Ratio vs. Forward Current Fig.4 Forward Current vs. Forward Voltage 3500 100 3000 o Forward current (mA) Current transfer ratio CTR (%) VCE= 2V 2500 2000 1500 1000 100 C o 40 C o 20 C o 60 C 10 500 0 0.1 1 1 10 0.5 0.7 0.9 1.1 Fig.5 Collector Current vs. Collector-emitter Voltage Fig.6 Collector Current vs. Collector-emitter Voltage 60 100 PC(MAX.) 0.9mA 0.8mA 0.7mA 0.6mA 20 0.5mA 0.2mA 0.3mA 0.4mA 0.1mA 10 0 Collector current Ic (mA) I F= 1mA 30 PC(MAX.) 90 50 40 1.3 1.5 1.7 1.9 Forward voltage (V) Forward current IF (mA) Collector current Ic (mA) o 80 C 80 I F= 5mA 70 60 50 2mA 40 1mA 30 20 10 0 0 2 4 6 8 Collector-emitter voltage Vce (V) 10 0 1 2 3 4 5 Collector-emitter voltage Vce (V) 6/12 Part No.: LTV-715F (M, S, S-TA, S-TA1) series BNC-OD-FC002/A4 Rev.: - Photocoupler LTV-715F (M, S, S-TA, S-TA1) series Relative current transfer ratio (%) 1.0 Fig.8 Collector-emitter Saturation Voltage vs. Ambient Temperature I F= 1mA VCE= 2V 0.8 0.6 0.4 0.2 1.00 Collector-emitter saturation voltage VCE (sat) (V) Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature I F= 20mA Ic= 5mA 0.80 0.60 0.40 0.20 0 0.00 20 40 60 80 100 20 O Response time ( s) Collector dark current I CEO (nA) 5 VCE= 10V 0.10 20 40 60 80 2 3 10 5 100 tf tr 2 10 5 2 0 10 100 VCE= 2V I C= 10mA 2 2 10 5 O td ts 0.1 1 10 Load resistance RL (k ) Ambient temperature Ta ( C) Fig.11 Frequency Response Test Circuit for Response Time Vcc VCE= 2V I C= 2mA Voltage gain Av (dB) 80 Fig.10 Response Time vs. Load Resistance 1.00 0.01 60 Ambient temperature Ta ( C) Fig.9 Collector Dark Current vs. Ambient Temperature 10.00 40 O Ambient temperature Ta ( C) Input RD RL Input Output Output 10% 90% 0 td ts tr tf Test Circuit for Frequency Response -10 RL= 10k 1k 100 Vcc RD -20 0.1 1 10 RL Output 100 Frequency f (kHz) 7/12 Part No.: LTV-715F (M, S, S-TA, S-TA1) series BNC-OD-FC002/A4 Rev.: - Photocoupler LTV-715F (M, S, S-TA, S-TA1) series 6. TEMPERATURE PROFILE OF SOLDERING 6.1 IR Reflow soldering (JEDEC-STD-020C compliant) One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three times. Profile item Conditions Preheat - Temperature Min (TSmin) 150˚C - Temperature Max (TSmax) 200˚C - Time (min to max) (ts) 90±30 sec Soldering zone - Temperature (TL) 217˚C - Time (tL) 60 sec Peak Temperature (TP) 260˚C 3˚C / sec max. Ramp-up rate 3~6˚C / sec Ramp-down rate 20 sec Temperature ( C) Ramp-up TP 260 C TL 217 C Tsmax 200 C Ramp-down 60 sec Tsmin 150 C tL (Soldering) 25 C 60 ~ 120 sec ts (Preheat) 35~70 sec 8/12 Time (sec) Part No.: LTV-715F (M, S, S-TA, S-TA1) series BNC-OD-FC002/A4 Rev.: - Photocoupler LTV-715F (M, S, S-TA, S-TA1) series 6.2 Wave soldering (JEDEC22A111 compliant) One time soldering is recommended within the condition of temperature. Temperature: 260+0/-5˚C Time: 10 sec. Preheat temperature:25 to 140˚C Preheat time: 30 to 80 sec. 6.3 Hand soldering by soldering iron Allow single lead soldering in every single process. One time soldering is recommended. Temperature: 380+0/-5˚C Time: 3 sec max. 9/12 Part No.: LTV-715F (M, S, S-TA, S-TA1) series BNC-OD-FC002/A4 Rev.: - Photocoupler LTV-715F (M, S, S-TA, S-TA1) series 7. RRECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit: mm 10/12 Part No.: LTV-715F (M, S, S-TA, S-TA1) series BNC-OD-FC002/A4 Rev.: - Photocoupler LTV-715F (M, S, S-TA, S-TA1) series 8. NAMING RULE LTV-715F(1)-(2) DEVICE PART NUMBER (1) No suffix = Dual-in-Line package M = Wide lead spacing package S = Surface mounting package - (2) TAPING TYPE (TA, TA1) Please refer to orientation of taping on Page: 3 Example : LTV-715FS-TA1 LTV 715F(1)(2)-V DEVICE PART NUMBER (1) No suffix = Dual-in-Line package M = Wide lead spacing package S = Surface mounting package (2) TAPING TYPE (TA, TA1) Please refer to orientation of taping on Page: 3 (3) VDE order option Example : LTV715FSTA1-V 11/12 Part No.: LTV-715F (M, S, S-TA, S-TA1) series BNC-OD-FC002/A4 Rev.: - Photocoupler LTV-715F (M, S, S-TA, S-TA1) series 9. NOTES  LiteOn is continually improving the quality, reliability, function or design and LiteOn reserves the right to make changes without further notices.  The products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio/visual equipment, electrical application and instrumentation.  For equipment/devices where high reliability or safety is required, such as space applications, nuclear power control equipment, medical equipment, etc, please contact our sales representatives.  When requiring a device for any ”specific” application, please contact our sales in advice.  If there are any questions about the contents of this publication, please contact us at your convenience.  The contents described herein are subject to change without prior notice.  Immerge unit’s body in solder paste is not recommended. 12/12 Part No.: LTV-715F (M, S, S-TA, S-TA1) series BNC-OD-FC002/A4 Rev.: -