LTV849-V

厂商：
LITEON(光宝)
封装：
描述：
LTV849-V - High Density Mounting Type Photocoupler - Lite-On Technology Corporation

数据手册：

下载LTV849-V.pdf

立即购买

详情介绍
数据手册
价格&库存

LTV849-V 数据手册

High Density Mounting Type Photocoupler LTV-819 Series Features Current transfer ratio (CTR : MIN. 50% at IF=5mA, VCE=5V) High input-output isolation voltage: (VISO : 5,000Vrms) Compact dual-in-line package LTV-819-1 : 1-channel type LTV-819-2 : 1-channel type LTV-829 : 2-channel type LTV-849 : 4-channel type UL approved (No. E113898) TUV approved (No. R9653630) CSA approved (No. CA91533-1) FIMKO approved (No. 193422) NEMKO approved (No. P96103013) DEMKO approved (No. 303986) SEMKO approved (No. 9646047/01-30) VDE approved (No. 094722) Options available : -Leads with 0.4"(10.16mm)spacing (M Type) -Leads bends for surface mounting(S Type) -Tape and Reel of Type I for SMD(Add"-TA"Suffix) -Tape and Reel of Type II for SMD(Add"-TA1"Suffix) -VDE 0884 approvals (Add"-V"Suffix) Applications 1. 2. 3. 4. Telephone exchanges. Computer terminals. System appliances, measuring instruments. Signal transmission between circuits of different potentials and impedances. Package Dimensions 12-115 PHOTOCOUPLER Note: 1.Year date code. 2. 2-digit work week. 3. Factory code shall be marked (Z : Taiwan, Y : Thailand). 4. All dimensions are in millimeters (inches). 5. Tolerance is 0.25mm (.010 ) unless otherwise noted. 6. Specifications are subject to change without notice. Ordering Information Part Number LTV-819-1 LTV-819-1M LTV-819-1S LTV-819-1S-TA LTV-819-1S-TA1 LTV-819-2 LTV-819-2M LTV-819-2S LTV-819-2S-TA LTV-819-2S-TA1 LTV-829 LTV-829M LTV-829S LTV-829S-TA LTV-829S-TA1 LTV-849 LTV-849M LTV-849S LTV-849S-TA LTV-849S-TA1 LTV8191-V LTV8191M-V LTV8191S-V LTV8191STA-V LTV8191STA1-V LTV8192-V LTV8192M-V LTV8192S-V LTV8192STA-V LTV8192STA1-V LTV829-V LTV829M-V LTV829S-V LTV829STA-V LTV829STA1-V LTV849-V LTV849M-V LTV849S-V 12-116 LTV849STA-V LTV849STA1-V Package 4-pin DIP 4-pin (leads with 0.4" spacing) 4-pin (lead bends for surface mount) 4-pin (tape and reel packaging of type I) 4-pin (tape and reel packaging of type II) 4-pin DIP 4-pin (leads with 0.4" spacing) 4-pin (lead bends for surface mount) 4-pin (tape and reel packaging of type I) 4-pin (tape and reel packaging of type II) 8-pin DIP 8-pin (leads with 0.4" spacing) 8-pin (lead bends for surface mount) 8-pin (tape and reel packaging of type I) 8-pin (tape and reel packaging of type II) 16-pin DIP 16-pin (leads with 0.4" spacing) 16-pin (lead bends for surface mount) 16-pin (tape and reel packaging of type I) 16-pin (tape and reel packaging of type II) 4-pin DIP 4-pin (leads with 0.4" spacing) 4-pin (lead bends for surface mount) 4-pin (tape and reel packaging of type I) 4-pin (tape and reel packaging of type II) 4-pin DIP 4-pin (leads with 0.4" spacing) 4-pin (lead bends for surface mount) 4-pin (tape and reel packaging of type I) 4-pin (tape and reel packaging of type II) 8-pin DIP 8-pin (leads with 0.4" spacing) 8-pin (lead bends for surface mount) 8-pin (tape and reel packaging of type I) 8-pin (tape and reel packaging of type II) 16-pin DIP 16-pin (leads with 0.4" spacing) 16-pin (lead bends for surface mount) 16-pin (tape and reel packaging of type I) 16-pin (tape and reel packaging of type II) Safety Standard Approval UL approved TUV approved CSA approved FIMKO approved NEMKO approved SEMKO approved DEMKO approved Application part number LTV-819-1 LTV-819-2 LTV-829 LTV-849 VDE approved LTV-819-1 LTV-819-2 LTV-829 LTV-849 Absolute Maximum Ratings Parameter Forward Current Input Reverse Voltage Power Dissipation Collector-Emitter Voltage Emitter-Collector Voltage Output Collector Current Collector Power Dissipation Total Power Dissipation *1.Isolation Voltage Operating Temperature Storage Temperature *2.Soldering Temperature (Ta=25 ) Symbol IF VR P V CEO V ECO IC PC P tot V iso Topr Tstg Tsol Rating 50 6 70 35 6 50 150 170 5,000 -25~+100 -40~+125 260 Unit mA V mW V V mA mW mW V rms *1. AC for 1 minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1)Short between anode and cathode on the primary side and between collector, emitter and base on the secondary side. (2)The isolation voltage tester with zero-cross circuit shall be used. (3)The waveform of applied volttage shall be a sine wave. *2. For 10 seconds. Electrical/Optical Characteristics Parameter Input (Ta=25 ) Min. Typ. 1.2 30 Symbol VF IR Ct I CEO BV CEO BV ECO IC CTR V CE(sat) R ISO Cf fc tr tf 5 Max. 1.4 10 250 100 Unit V A pF nA V V Conditions I F=20mA V R =4V V=0, f=1KHz V CE =20V I C=0.1mA I E=10 A PHOTOCOUPLER Forward Voltage Reverse Current Terminal Capacitance Collector Dark Current Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector Current *Current Transfer Ratio Collector-emitter Saturation Voltage Isolation Resistance Floating Capacitance Cut-off Frequency Response Time (Rise) Response Time (Fall) Output 35 6 2.5 50 0.1 10 10 20 400 0.2 mA % V pF KHz s s I F=5mA, V CE =5V I F=20mA, I C=1mA DC500V, 40~60% R.H. Transfer Characteristics 10 11 0.6 80 4 3 1 V=0, f=1MHz V CE =5V, I C =2mA R L=100 , -3dB V CE =2V, I C =2mA R L=100 IC *CTR= IF 100% 12-117 Typical Electrical/Optical Characteristic Curves (25 Ambient Temperature Unless Otherwise Noted) 12-118 12-119 PHOTOCOUPLER

下载 PDF

LTV849-V

物料型号： - LTV-819-1, LTV-819-1M, LTV-819-1S, LTV-819-1S-TA, LTV-819-1S-TA1 - LTV-819-2, LTV-819-2M, LTV-819-2S, LTV-819-2S-TA, LTV-819-2S-TA1 - LTV-829, LTV-829M, LTV-829S, LTV-829S-TA, LTV-829S-TA1 - LTV-849, LTV-849M, LTV-849S, LTV-849S-TA, LTV-849S-TA1 - LTV8191-V, LTV8191M-V, LTV8191S-V, LTV8191STA-V, LTV8191STA1-V - LTV8192-V, LTV8192M-V, LTV8192S-V, LTV8192STA-V, LTV8192STA1-V - LTV829-V, LTV829M-V, LTV829S-V, LTV829STA-V, LTV829STA1-V - LTV849-V, LTV849M-V, LTV849S-V, LTV849STA-V, LTV849STA1-V

器件简介： LTV-819系列是一款高密度安装型的光电耦合器，具有高输入输出隔离电压和电流传输比，适用于不同电位和阻抗电路之间的信号传输。

引脚分配： - LTV-819-1：1通道类型 - LTV-819-2：1通道类型 - LTV-829：2通道类型 - LTV-849：4通道类型

参数特性： - 隔离电压：5000Vrms - 工作温度范围：-25~+100°C - 存储温度范围：-40~+125°C - 焊接温度：260°C - 正向电流：50mA - 反向电压：6V - 功耗：70mW - 集电极-发射极电压：35V - 集电极电流：50mA - 集电极功耗：150mW - 总功耗：170mW

功能详解： LTV-819系列光电耦合器主要用于电位和阻抗不同的电路间的信号传输，提供高隔离电压，保障信号传输安全。

应用信息： 1. 电话交换机 2. 计算机终端 3. 系统设备、测量仪器 4. 不同电位和阻抗电路间的信号传输

封装信息： - 引脚间距为0.4英寸(10.16mm)的M型 - 表面贴装的S型引脚弯曲 - 适用于SMD的I型胶带和卷轴(加"-TA"后缀) - 适用于SMD的II型胶带和卷轴(加"-TA1"后缀) - VDE 0884认证(加"-V"后缀)

LTV849-V 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“LTV849-V”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

LTV849-V

相关技术文章