LTW-008RGB2-PH1

Specific Lighting Product Data Sheet LTW-008RGB2-PH1 Spec No.: DS23-2014-0033 Effective Date: 01/08/2016 Revision: B LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto Specific Lighting LTW-008RGB2-PH1 1. Description The LTW (LiteOn White LED) is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light Emitting Diodes with the brightness of conventional lighting. It gives you total design freedom and unmatched brightness, creating a new opportunities for solid state lighting to displace conventional lighting technologies... 1.1 Features       1.2 Benefits Features Package in 16mm tape on 10" diameter reels Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. EIA STD package. I.C. compatible. Meet green product and Pb-free(According to RoHS)        Ambient lights (household appliances) Portable (flashlight, bicycle) Decorative/Entertainment Bollards/Security/Garden Traffic signaling/Beacons/ Rail crossing and Wayside Indoor/Outdoor Commercial and Residential Architectural Edge_lit signs (Exit, point of sale) 2. Outline Dimensions 2.1 Form Factor of 008RGB2 2.2 Coplanarity LSL: 0.00 mm (Lead is higher) USL: 0.08 mm (PPA is higher) Notes 1. All dimensions are in millimeters. 2. Tolerance is ±0.1 mm (.004") unless otherwise noted. 3. Coplanarity: The stand-off from PPA to solder surface of leads is limited by USL: 0.08mm; LSL: 0.00mm means the solder surface of leads is higher 0.00mm or lower 0.08mm than PPA in limit. 4. The size of burr which is vertical to solder surface must lower than 0.08mm in limit. 1/15 Part No. : LTW-008RGB2-PH1 BNS-OD-FC002/A4 Specific Lighting LTW-008RGB2-PH1 3. Absolute Maximum Ratings at Ta=25℃ Rating Symbol Parameter Unit R G B Po 75 120 120 mW IFP 100 100 100 mA Continuous Forward Current IF 40 40 40 mA Reverse Voltage VR 5 V Operating Temperature Range Topr -40 ~ +80 °C Storage Temperature Range Tstg -40 ~ +100 °C Power Dissipation Peak Forward Current Soldering Condition 1 1, 2 260℃ For 5 Seconds Tsol Notes Operating the LED (in an application) under reverse bias condition might result in damage or failure of the component 4. Suggest IR Reflow Condition R-Reflow Soldering Profile for lead free soldering (Acc. to J-STD-020D) 2/15 Part No. : LTW-008RGB2-PH1 BNS-OD-FC002/A4 Specific Lighting LTW-008RGB2-PH1 5. Electro-Optical Characteristics at Ta=25°C Values Parameter Luminous Flux Symbol v 1 2θ1/2 Viewing Angle R G B Min 2.12 4.88 0.46 Typ. 2.90 6.10 0.57 Max. - - - Typ. Min Dominant 2 Wavelength d d(Min) 130 618 455 Typ. Max. 630 532 465 Typ. x 0.6879 0.1317~ 0.2150 0.1555 Typ. y 0.3115 0.6890 0.0283 Typ. x 0.7055 0.0805~ 0.1825 0.1443 Typ. y 0.2940 0.7850 0.0461 628 523 458 Min 1.8 2.9 2.7 Typ. 2.3 3.4 3.1 Max. 2.5 3.8 3.5 20 33 22 Color Coordinate d(Max) 517 Min Peak Wavelength p Typ. Max. Forward Voltage 3 VF Spectrum Radiation Bandwidth  Typ. Reverse Current IR Max. 10 Test Condition Unit R: IF = 25mA G: IF = 30mA B: IF = 15mA lm R: IF = 25mA G: IF = 30mA B: IF = 15mA ° R: IF = 25mA G: IF = 30mA B: IF = 15mA nm R: IF = 25mA G: IF = 30mA B: IF = 15mA R: IF = 25mA G: IF = 30mA B: IF = 15mA nm R: IF = 25mA G: IF = 30mA B: IF = 15mA V R: IF = 25mA G: IF = 30mA B: IF = 15mA nm VR=5V μA Notes 1. Tolerance of Luminous Intensity +/- 10%. 2. Tolerance of Dominant Wavelength +/- 1nm. 3. Tolerance of Forward Voltage +/- 0.1V 4. The chromaticity coordinates (x, y) is derived from the 1931 CIE chromaticity diagram. 5. Caution in ESD: Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded. 6. CAS140B is the test standard for the chromaticity coordinates (x, y) & lm. 3/15 Part No. : LTW-008RGB2-PH1 BNS-OD-FC002/A4 Specific Lighting LTW-008RGB2-PH1 6. Bin Code List 6.1 Luminous Flux Spec Luminous Flux Spec. Table Luminous Flux (lm) at IF: R=25mA, G=30mA, B=15mA IV Bin Min. Max. W0 7.46 8.20 W1 8.20 9.03 W2 9.03 9.93 W3 9.93 10.92 W4 10.92 12.00 Tolerance on each Luminous Intensity bin and Luminous Flux are +/- 10% 6.2 Color Ranks Color Ranks Table Color bin limits Color bin limits Ranks Ranks IF: R=25mA, G=30mA, B=15mA x 0.2490 0.2550 0.2623 IF: R=25mA, G=30mA, B=15mA 0.2563 C1 x 0.2769 0.2828 0.2901 0.2842 y 0.2899 0.2760 0.2871 0.3011 x 0.2610 0.2670 0.2742 0.2683 y 0.2428 0.2295 0.2404 0.2539 x 0.2683 0.2742 0.2815 0.2755 y 0.2539 0.2404 0.2512 0.2649 x 0.2755 0.2815 0.2887 0.2828 y 0.2649 0.2512 0.2621 0.2760 x 0.2828 0.2887 0.2960 0.2901 y 0.2760 0.2621 0.2730 0.2871 x 0.2782 0.2841 0.2993 0.2934 y 0.3152 0.3011 0.3011 0.3152 x 0.2934 0.2993 0.3144 0.3087 y 0.3152 0.3011 0.3011 0.3152 F2 y 0.2694 0.2561 0.2674 0.2809 x 0.2563 0.2623 0.2696 0.2636 D1 C3 y 0.2809 0.2674 0.2786 0.2923 x 0.2636 0.2696 0.2769 0.2709 E1 D3 y 0.2923 0.2786 0.2899 0.3038 x 0.2709 0.2769 0.2842 0.2782 F1 E3 y 0.3038 0.2899 0.3011 0.3152 x 0.2550 0.2610 0.2683 0.2623 C2 F3 y 0.2561 0.2428 0.2539 0.2674 x 0.2623 0.2683 0.2755 0.2696 D2 K1 y 0.2674 0.2539 0.2649 0.2786 x 0.2696 0.2755 0.2828 0.2769 E2 L1 y 0.2786 0.2649 0.2760 0.2899 4/15 Part No. : LTW-008RGB2-PH1 BNS-OD-FC002/A4 Specific Lighting LTW-008RGB2-PH1 Color Ranks Table Color bin limits Color bin limits Ranks Ranks IF: R=25mA, G=30mA, B=15mA x 0.3087 0.3144 0.3295 IF: R=25mA, G=30mA, B=15mA 0.3239 M1 x 0.2815 0.2742 0.2890 0.2963 y 0.2512 0.2404 0.2404 0.2512 x 0.2963 0.2890 0.3037 0.3111 y 0.2512 0.2404 0.2404 0.2512 x 0.3111 0.3037 0.3183 0.3258 y 0.2512 0.2404 0.2404 0.2512 x 0.2887 0.2815 0.2963 0.3036 y 0.2621 0.2512 0.2512 0.2621 x 0.3036 0.2963 0.3111 0.3185 y 0.2621 0.2512 0.2512 0.2621 x 0.3185 0.3111 0.3258 0.3333 y 0.2621 0.2512 0.2512 0.2621 x 0.2960 0.2887 0.3036 0.3109 y 0.2730 0.2621 0.2621 0.2730 x 0.3109 0.3036 0.3185 0.3259 y 0.2730 0.2621 0.2621 0.2730 x 0.3259 0.3185 0.3333 0.3408 y 0.2730 0.2621 0.2621 0.2730 KD y 0.3152 0.3011 0.3011 0.3152 x 0.2841 0.2901 0.3051 0.2993 K2 LD y 0.3011 0.2871 0.2871 0.3011 x 0.2993 0.3051 0.3201 0.3144 L2 MD y 0.3011 0.2871 0.2871 0.3011 x 0.3144 0.3201 0.3352 0.3295 M2 KE y 0.3011 0.2871 0.2871 0.3011 x 0.2901 0.2960 0.3109 0.3051 K3 LE y 0.2871 0.2730 0.2730 0.2871 x 0.3051 0.3109 0.3259 0.3201 L3 ME y 0.2871 0.2730 0.2730 0.2871 x 0.3201 0.3259 0.3408 0.3352 M3 KF y 0.2871 0.2730 0.2730 0.2871 x 0.2742 0.2670 0.2817 0.2890 KC LF y 0.2404 0.2295 0.2295 0.2404 x 0.2890 0.2817 0.2963 0.3037 LC MF y 0.2404 0.2295 0.2295 0.2404 x 0.3037 0.2963 0.3108 0.3183 y 0.2404 0.2295 0.2295 0.2404 MC Tolerance on each Hue (x, y) bin is +/- 0.01 5/15 Part No. : LTW-008RGB2-PH1 BNS-OD-FC002/A4 Specific Lighting LTW-008RGB2-PH1 6.3 C.I.E 1931 Chromaticity Diagram for Color Ranks 6.4 Shipping Label Code list Shipping Label Code Color Ranks Luminous Flux Ranks W0 W1 W2 W3 W4 C1 A1 B1 C1 D1 E1 D1 A2 B2 C2 D2 E2 E1 A3 B3 C3 D3 E3 F1 A4 B4 C4 D4 E4 C2 A5 B5 C5 D5 E5 D2 A6 B6 C6 D6 E6 E2 A7 B7 C7 D7 E7 F2 A8 B8 C8 D8 E8 6/15 Part No. : LTW-008RGB2-PH1 BNS-OD-FC002/A4 Color Ranks Specific Lighting LTW-008RGB2-PH1 C3 A9 B9 C9 D9 E9 D3 A10 B10 C10 D10 E10 E3 A11 B11 C11 D11 E11 F3 A12 B12 C12 D12 E12 K1 A13 B13 C13 D13 E13 L1 A14 B14 C14 D14 E14 M1 A15 B15 C15 D15 E15 K2 A16 B16 C16 D16 E16 L2 A17 B17 C17 D17 E17 M2 A18 B18 C18 D18 E18 K3 A19 B19 C19 D19 E19 L3 A20 B20 C20 D20 E20 M3 A21 B21 C21 D21 E21 KC A22 B22 C22 D22 E22 LC A23 B23 C23 D23 E23 MC A24 B24 C24 D24 E24 KD A25 B25 C25 D25 E25 LD A26 B26 C26 D26 E26 MD A27 B27 C27 D27 E27 KE A28 B28 C28 D28 E28 LE A29 B29 C29 D29 E29 ME A30 B30 C30 D30 E30 KF A31 B31 C31 D31 E31 LF A32 B32 C32 D32 E32 MF A33 B33 C33 D33 E33 7/15 Part No. : LTW-008RGB2-PH1 BNS-OD-FC002/A4 Specific Lighting LTW-008RGB2-PH1 7. Typical Electrical / Optical Characteristics Curves (25C Ambient Temperature Unless Otherwise Noted) 8/15 Part No. : LTW-008RGB2-PH1 BNS-OD-FC002/A4 Specific Lighting LTW-008RGB2-PH1 8. Reliability Test Plan 8.1 Reliability conditions Item Test Item Condition Duration Resistance to soldering heat (RTSH) IR soldering according attached JEITA ED-4701 300 301 lead free (Refer to J-STD-020D.1) P1 Sample Size 10sec/3x 3lots*30 20000hrs 3lots*30 20000hrs 3lots*30 2500cycles 3lots*30 100cycles 30 Ta=60'C P2 Steady state life test(SSLT) If (RGB)=25/30/15mA Ta=60’C P3 Pulse life test(PLT) If (RGB)= 25/30/15mA -20~25~85'C/ P4 Temperature cycle (TC) P5 Thermal shock (TS) -40~105'C/5min each P6 High Temperature Storage (HTS) 100'C 1000hrs 30 P7 Low Temperature Storage (LTS) -40'C 1000hrs 30 P8 High Temperature/High Humidity (WHTS) 85'C/85% 1000hrs 30 30min each (20mins trans) 8.2 Criteria for Judging the Damage Criteria for Judgment Item Symbol Test Condition Min. Forward Voltage VF IF =Typical Current Luminous Flux Lm IF =Typical Current CCX & CCY (mixing white) X,Y IF =Typical Current Max. U.S.L. x 1.1 L.S.L. x 0.5 Shift2.0V@0.1mA for InGaN product 13/15 Part No. : LTW-008RGB2-PH1 BNS-OD-FC002/A4 Specific Lighting LTW-008RGB2-PH1 11. Suggested Checking List  Training and Certification 1. Everyone working in a static-safe area is ESD-certified? 2. Training records kept and re-certification dates monitored?  Static-Safe Workstation & Work Areas 1. Static-safe workstation or work-Sreas have ESD signs? 2. All surfaces and objects at all static-safe workstation and within 1 ft measure less than 100V? 3. All ionizer activated, positioned towards the units? 4. Each work surface mats grounding is good?  Personnel Grounding 1. Every person (including visitors) handling ESD sensitive (ESDS) items wear wrist strap, heel strap or conductive shoes with conductive flooring? 2. If conductive footwear used, conductive flooring also present where operator stand or walk? 3. Garments, hairs or anything closer than 1 ft to ESD items measure less than 100V*? 4. Every wrist strap or heel strap/conductive shoes checked daily and result recorded for all DLs? 5. All wrist strap or heel strap checkers calibration up to date? Note: *50V for Blue LED.  Device Handling 1. Every ESDS items identified by EIA-471 labels on item or packaging? 2. All ESDS items completely inside properly closed static-shielding containers when not at static-safe workstation? 3. No static charge generators (e.g. plastics) inside shielding containers with ESDS items? 4. All flexible conductive and dissipative package materials inspected before reuse or recycle?  Others 1. Audit result reported to entity ESD control coordinator? 2. Corrective action from previous audits completed? 3. Are audit records complete and on file? 14/15 Part No. : LTW-008RGB2-PH1 BNS-OD-FC002/A4 Specific Lighting LTW-008RGB2-PH1 12. Revision Information Version Page A 1 Content of Change The package layout changed. Date Record 2010/05/05 1. Red min. lumen spec modify from 1.61 to 1.70 2. White min. lumen spec modify form 6.32 to 6.41 (Based on B 3, 4 2010/05/07 Red min lumen modify) 3. Green max. Vf spec modify from 3.6 to 3.55 1. New design solder pin of lead frame modify. C 1, 6, 7 2010/07/13 2. Typical electrical / optical characteristics curves modify. D 3, 4, 5 Luminous flux and color spec modify. 2010/08/24 1. Add the dimensions of pick-up area. E 1, 3, 10 2. Green max. Vf spec modify from 3.65 to 3.55 2010/10/22 3. Duration time for RA test modify. (follow 2K10) F 6 G 4, 5, 6 H 3 I 4, 5, 6, 7, 8 Add shipping label code list 2010/12/08 Color spec modify 2011/01/24 Green max. Vf spec modify from 3.55 to 3.6 2012/05/08 1. Min. lumen spec modify 2014/11/21 2. Color spec modify J 2 Modify solder pins description 15/15 2015/09/14 Part No. : LTW-008RGB2-PH1 BNS-OD-FC002/A4