LTW-5630SD530

Specific Lighting Product Data Sheet LTW-5630SD530 Spec No. :DS23-2016-0137 Effective Date: 06/10/2017 Revision: B LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto Specific Lighting LTW-5630SD530 1. Description The LiteON 5630 Product series is a wide beam angle standard-dimension package, combining the lifetime and reliability advantages of Light Emitting Diodes with the brightness of conventional lighting. It gives you total design freedom and unmatched brightness, creating a new opportunities for solid state lighting to displace conventional lighting technologies. 1.1 Features





Package in 8mm tape on 7" diameter reels. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. EIA STD package. I.C. compatible. Meet green product and Pb-free(According to RoHS) 1/17 Part No. : LTW-5630SD530 BNS-OD-FC002/A4 Specific Lighting LTW-5630SD530 2. Outline Dimensions Part No. LTW-5630SD530 Lens Color Clean Source Color Green InGaN/GaN Notes: 1. All dimensions are in millimeters. 2. Tolerance is ±0.2 mm (.008") unless otherwise noted. 2/17 Part No. : LTW-5630SD530 BNS-OD-FC002/A4 Specific Lighting LTW-5630SD530 3. Absolute Maximum Ratings at Ta=25°C Parameter Symbol Rating Unit DC Forward Current IF 150 mA Pulsed Forward Current (*1) IFP 200 mA Power Dissipation PD 540 mW Operating Temperature Topr -40~+85 oC Storage Temperature Tstg -40~+100 oC Junction Temperature Tj 110 oC Notes : 1. 1/10 duty cycle, Pulse width 10msec. 3/17 Part No. : LTW-5630SD530 BNS-OD-FC002/A4 Specific Lighting LTW-5630SD530 4. Electro-Optical Characteristics 4.1 Typical Performance Parameter Luminous Flux Symbol Φv Values Unit Min 36 Typ. 50 Max. 64 lm Radiant Flux Φe Typ. 96 mW Photon Flux PPF Typ. 0.427 μmol/s Min 520 Typ. 530 Max. 540 Dominant Wavelength Wd nm Peak Wavelength WP Typ. 525 nm Spectral Line Half-width △λ Typ. 30 nm Viewing angle 2θ1/2 Typ. 120 deg Min 3.0 Typ. 3.2 Max. 3.8 Max. 10 Forward Voltage Reverse Current VF IR Test Condition IF =150mA V μA VR=-5V Notes 1. Flux and Dominant Wavelength are the total flux output as measured with an integrating sphere. 2. Flux classification code is marked on each packing bag. 3. CAS-140B is the test standard for flux & Dominant Wavelength & Voltage. 4/17 Part No. : LTW-5630SD530 BNS-OD-FC002/A4 Specific Lighting LTW-5630SD530 4.2 Typical Electrical / Optical Characteristics Curves Fig1. Relative Spectrum of Emission 0° 100% 90% 30° Relative Intensity (%) 80% 70% 60% 60° 50% 40% 30% 20% 10% 0% 90° 60 30° 0° 50 100 Fig2. Radiation Characteristics 5/17 Part No. : LTW-5630SD530 BNS-OD-FC002/A4 Specific Lighting LTW-5630SD530 Fig3. Forward Current vs. Voltage Fig.4. Forward Current vs. Relative Radiant Flux 6/17 Part No. : LTW-5630SD530 BNS-OD-FC002/A4 Specific Lighting LTW-5630SD530 5. Bin Code List Forward Voltage Spec. Table IF =150mA, Ta=25°C VF Bin Min Max 8 3.0 3.2 9 3.2 3.4 10 3.4 3.6 11 3.6 3.8 Luminous Flux Table IF =150mA, Ta=25°C lm code Min Max G3 36 40 G4 40 43 G5 43 48 G6 48 53 G7 53 58 G8 58 64 Dominant Wavelength Spec. Table IF =150mA, Ta=25°C Wd Bin Min Max D15 520 525 D16 525 530 D17 530 535 D18 535 540 Notes 1. The flux is operated performance with forward current 150mA per die. 2. Flux is the total luminous flux output as initial measured with an integrated sphere. 3. Forward Voltage (VF) measurement allowance is ±0.1V. 4. Flux measurement allowance is ±10%. 7/17 Part No. : LTW-5630SD530 BNS-OD-FC002/A4 Specific Lighting LTW-5630SD530 5. Wavelength allowance is ±5nm ※ Notes: Full Rank on Label Example: 8/G5/D15 Forward Voltage Rank Luminous flux Rank Dominant Wavelength Rank 8 G5 D15 8/17 Part No. : LTW-5630SD530 BNS-OD-FC002/A4 Specific Lighting LTW-5630SD530 6. Reflow Soldering Characteristics Profile Feature Lead Free Assembly Average Ramp-Up Rate (TSmax to TP) 3°C / second max Preheat Temperature Min (TSmin) 150°C Preheat Temperature Max (TSmax) 200°C Preheat Time (tSmin to tSmax) 60 – 180 seconds Time Maintained Above Temperature (TL) 217°C Time Maintained Above Time (tL) 60 – 150 seconds Peak / Classification Temperature (TP) 260°C Time Within 5°C of Actual Peak Temperature (t P) 5 seconds Ramp – Down Rate 6°C / second max Time 25°C to Peak Temperature 8 minutes max 9/17 Part No. : LTW-5630SD530 BNS-OD-FC002/A4 Specific Lighting LTW-5630SD530 Notes: 1. The LEDs can be soldered using the reflow soldering or hand soldering method. The recommended hand soldering condition is 350 °C max. and 2 secs max. for one time only, and the recommended reflow soldering condition is 260 °C max. and 5 secs max. for three times max. 2. All temperatures refer to topside of the package, measured on the package body surface. 3. The soldering condition referring to J-STD-020B. The storage ambient for the LEDs should not exceed 30 °C temperature or 70% relative humidity. It is recommended that LEDs out of their original packaging are soldered within one week. For extended storage out of their original packaging, it is recommended that the LEDs were stored in a sealed container with appropriate desiccant, or desiccators with nitrogen ambient. If the LEDs were unpacked more than 168hrs, baking the LEDs at 60 °C for 24hrs before soldering process. 4. The soldering profile could be further referred to different soldering grease material characteristic. The grease vendor will provide this information. 5. A rapid-rate process is not recommended for the LEDs cooling down from the peak temperature. 6. Although the recommended reflow conditions are specified above, the reflow or hand soldering condition at the lowest possible temperature is desirable for the LEDs. 7. LiteOn cannot make a guarantee on the LEDs which have been already assembled using the dip soldering method. 10/17 Part No. : LTW-5630SD530 BNS-OD-FC002/A4 Specific Lighting LTW-5630SD530 7. Reliability Test Number of No Test item Test Condition Duration 1 Operating Test Ta=25°C, IF=150mA 1,000hrs 0/20 Ta=85°C, IF=150mA 1,000hrs 0/20 Ta=85°C, RH=85%, IF=1 50mA 1,000hrs 0/20 Ta=-40°C, IF=150mA 1,000hrs 0/20 2 3 4 High Temp. Operating Test High Humidity Operating Test Low Temp. Operating Test Damaged 5 High Temp. Storage Test Ta=100°C 1,000hrs 0/20 6 Low Temp. Storage Test Ta=-40°C 1,000hrs 0/20 7 Temperature Cycle Test Ta= -40°C, 30min ．~25°C, 5min ．~100°C, 30min ． 100 cycle 0/20 8 Resistance to Soldering Heat (Reflow Soldering) Tsld=260°C , 10sec 2 times 0/20 Criteria for Judging the Damage Criteria for Judgment Item Symbol Test Condition Min. Max. Forward Voltage VF IF=150 mA － Initial Value ×1.1 flux Φv IF=150 mA Initial Value ×0.7 ― Reverse Current IR VR=-5V － 10μA 11/17 Part No. : LTW-5630SD530 BNS-OD-FC002/A4 Specific Lighting LTW-5630SD530 8. User Guide
Cleaning Do not use unspecified chemical liquid to clean LED they could harm the package. If cleaning is necessary, immerse the LED in ethyl alcohol or isopropyl alcohol at normal temperature for less than one minute.
Recommend Printed Circuit Board Attachment Pad Infrared / vapor phase Reflow Soldering
Package Dimensions of Tape Note: All dimensions are in millimeters (inches).
Package Dimensions of Reel 12/17 Part No. : LTW-5630SD530 BNS-OD-FC002/A4 Specific Lighting LTW-5630SD530 Notes: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel-3000 pieces per reel. 3. Minimum packing quantity is 500 pieces for remainders. 4. The maximum number of consecutive missing lamps is two. 5. In accordance with EIA-481-1-B specifications. 13/17 Part No. : LTW-5630SD530 BNS-OD-FC002/A4 Specific Lighting LTW-5630SD530 9. Cautions 9.1 Application The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).Consult Liteon’s Sales in advance for information on applications in which exceptional reliability is required, particularly when the failure or malfunction of the LEDs may directly jeopardize life or health (such as in aviation, transportation, traffic control equipment, medical and life support systems and safety devices). 9.2 Storage This product is qualified as Moisture sensitive Level 3 per JEDEC J-STD-020 Precaution when handing this moisture sensitive product is important to ensure the reliability of the product. The package is sealed: The LEDs should be stored at 30°C or less and 90%RH or less. And the LEDs are limited to use within one year, while the LEDs is packed in moisture-proof package with the desiccants inside. The package is opened: The LEDs should be stored at 30°C or less and 60%RH or less. Moreover, the LEDs are limited to solder process within 168hrs. If exceeding the storage limiting time since opened, that we recommended to baking LEDs at 60°C at least 24hrs. To seal the rema inder LEDs return to package, it’s recommended to be with workable desiccants in original package. 9.3 Cleaning Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary. 9.4 Drive Mode An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each LED as shown in Circuit A below (A) Recommended circuit. Circuit model A Circuit model B (B) The brightness of each LED might appear different due to the differences in the I-V characteristics of those LEDs. 14/17 Part No. : LTW-5630SD530 BNS-OD-FC002/A4 Specific Lighting LTW-5630SD530 9.5 ESD (Electrostatic Discharge) Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage: Use of a conductive wrist band or anti-electrostatic glove when handling these LEDs. All devices, equipment, and machinery must be properly grounded. Work tables, storage racks, etc. should be properly grounded. Use ion blower to neutralize the static charge which might have built up on surface of the LED’s plastic lens as a result of friction between LEDs during storage and handling. ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low forward voltage, or “no lightup” at low currents.To verify for ESD damage, check for “light up” and VF of the suspect LEDs at low currents.The VF of “good” LEDs should be >2.0V@0.1mA for InGaN product and >1.4V@0.1mA for AlInGaP product. 9.6 Suggested Checking List: Training and Certification 1. Everyone working in a static-safe area is ESD-certified? 2. Training records kept and re-certification dates monitored? Static-Safe Workstation & Work Areas 1. Static-safe workstation or work-areas have ESD signs? 2. All surfaces and objects at all static-safe workstation and within 1 ft measure less than 100V? 3. All ionizer activated, positioned towards the units? 4. Each work surface mats grounding is good? Personnel Grounding 1. Every person (including visitors) handling ESD sensitive (ESDS) items wear wrist strap, heel strap or conductive shoes with conductive flooring? 2. If conductive footwear used, conductive flooring also present where operator stand or walk? 3. Garments, hairs or anything closer than 1 ft to ESD items measure less than 100V*? 4. Every wrist strap or heel strap/conductive shoes checked daily and result recorded for all DLs? 5. All wrist strap or heel strap checkers calibration up to date? 15/17 Part No. : LTW-5630SD530 BNS-OD-FC002/A4 Specific Lighting LTW-5630SD530 Note: *50V for Blue LED. Device Handling 1. Every ESDS items identified by EIA-471 labels on item or packaging? 2. All ESDS items completely inside properly closed static-shielding containers when not at static-safe workstation? 3. No static charge generators (e.g. plastics) inside shielding containers with ESDS items? 4. All flexible conductive and dissipative package materials inspected before reuse or recycle? Others 1. Audit result reported to entity ESD control coordinator? 2. Corrective action from previous audits completed? 3. Are audit records complete and on file? 9.7 Others: Do not put any pressure on the light emitting surface either by finger or any hand tool and do not stack the products. Stress or pressure may cause damage to the wires of the LED array. This product is not designed for the use under any of the following conditions, please confirm the performance and reliability are well enough if you use it under any of the following conditions Do not use sulfur-containing materials in commercial products including the materials such as seals and adhesives that may contain sulfur. Do not put this product in a place with a lot of moisture (over 85% relative humidity), dew condensation, briny air, and corrosive gas (Cl, H2S, NH3, SO2, NOX, etc.), exposure to a corrosive environment may affect silver plating. The appearance and specifications of the product may be modified for improvement without prior notice. 16/17 Part No. : LTW-5630SD530 BNS-OD-FC002/A4 Specific Lighting LTW-5630SD530 Revision History: Revision Date: Last Version: Version Page 1.0 All 2.0 4,7,8 Content of Change Date Record 01/25/2017 Remove G1/G2, add G6/G7/G8 bin 17/17 06/02/2017 Part No. : LTW-5630SD530 BNS-OD-FC002/A4