LTW-M670ZVS-M5

Specific Lighting LTW-Q35ZRGB Specific Lighting Product Data Sheet LTW-M670ZVS-M5 Created Date: Revision: B, 06 / 08 / 2017 06 / 12 / 2019 0/16 Part No. : LTW-Q35ZRGB BNS-OD-FC002/A4 Specific Lighting LTW-M670ZVS-M5 1. Description The LTW (LiteOn White LED) is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light Emitting Diodes with the brightness of conventional lighting. It gives you total design freedom and unmatched brightness, creating a new opportunities for solid state lighting to displace conventional lighting technologies.. . 1.1. Features        Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Instant light (less than 100 ns) Low voltage DC operated Low thermal resistance RoHS Compliant Meet green product and Pb-free(According to RoHS) 1.2. Applications          Reading lights (car, bus, aircraft) Portable (flashlight, bicycle) Downlighters/Orientation Decorative/Entertainment Bollards/Security/Garden Cove/Undershelf/Task Traffic signaling/Beacons/ Rail crossing and Wayside Indoor/Outdoor Commercial and Residential Architectural Edge_lit signs (Exit, point of sale) 2. Outline Dimensions Notes : 1. All dimensions are in millimeters. 2. Tolerance is ±0.2 mm (.008") unless otherwise noted. 1/12 Part No. : LTW-M670ZVS-M5 BNS-OD-FC002/A4 Specific Lighting LTW-M670ZVS-M5 3. Absolute Maximum Ratings at Ta=25℃ Parameter LTW-M670ZVS-M5 Unit 120 mW 100 mA DC Forward Current 30 mA Reverse Voltage 5 V Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Operating Temperature Range -30℃ to + 85℃ Storage Temperature Range -40℃ to + 100℃ Reflow Soldering Condition 260℃ For 10 Seconds Note: Operating the LED (in an application) under reverse bias condition might result in damage or failure of the component. 4. Suggest IR Reflow Condition R-Reflow Soldering Profile for lead free soldering (Acc. to J-STD-020D) 2/12 Part No. : LTW-M670ZVS-M5 BNS-OD-FC002/A4 Specific Lighting LTW-M670ZVS-M5 5. Electro-Optical Characteristics at Ta=25°C Parameter Symbol Min. Typ. Max. Unit mcd 1700 - 2700 mcd Test Condition IF = 20mA Luminous Intensity Note 1, 2, 5 IF = 20mA Luminous Flux ФV 5000 mlm Note 1, 2, 5 Viewing Angle 2θ1/2 120 x 0.29 y 0.27 deg IF = 20mA Chromaticity Coordinates Forward Voltage ESD-Withstand Voltage Fig.6 Note 3, 5 VF 2.8 ESD 2K 3.1 Fig.1 3.4 V V IF = 20mA HBM Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. IV classification code is marked on each packing bag. 3. The chromaticity coordinates (x, y) is derived from the 1931 CIE chromaticity diagram. 4. Caution in ESD: Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-Electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded. 5. CAS140B is the test standard for the chromaticity coordinates (x, y) & IV. 6. The chromaticity coordinates (x, y) guarantee should be added +/- 0.01 tolerance. 3/12 Part No. : LTW-M670ZVS-M5 BNS-OD-FC002/A4 Specific Lighting LTW-M670ZVS-M5 6. Bin Code List VF Spec. Table VF Bin Forward Voltage (volts) at IF = 20mA Min. Max. VZ 2.8 2.9 V0 2.9 3.0 V1 3.0 3.1 V2 3.1 3.2 V3 3.2 3.3 V4 3.3 3.4 Tolerance on each Forward Voltage bin is +/- 0.1 V Luminous Intensity Spec. Table IV (mcd) at IF = 20mA IV Bin Min. Max. S71 1700 1800 S81 1800 1900 S91 1900 2000 T01 2000 2100 T11 2100 2200 T21 2200 2300 T31 2300 2400 T41 2400 2500 T51 2500 2600 T61 2600 2700 Tolerance on each Luminous Intensity bin is +/- 10%. 4/12 Part No. : LTW-M670ZVS-M5 BNS-OD-FC002/A4 Specific Lighting LTW-M670ZVS-M5 Color Ranks Table Color bin limits at IF = 20mA Ranks CIE 1931Chromaticity coordinates B C F G x 0.279 0.279 0.289 0.289 y 0.262 0.252 0.270 0.280 x 0.279 0.279 0.289 0.289 y 0.252 0.242 0.261 0.270 x 0.289 0.289 0.299 0.299 y 0.280 0.270 0.288 0.298 x 0.289 0.289 0.299 0.299 y 0.270 0.261 0.278 0.288 Tolerance on each Hue (x, y) bin is +/- 0.01 Rank (X,Y) 0.32 0.30 F 0.28 G B 0.26 C 0.24 0.22 0.26 0.27 0.28 0.29 0.30 0.31 5/12 0.32 Part No. : LTW-M670ZVS-M5 BNS-OD-FC002/A4 Specific Lighting LTW-M670ZVS-M5 7. Typical Electrical / Optical Characteristics Curves (25C Ambient Temperature Unless Otherwise Noted) 6/12 Part No. : LTW-M670ZVS-M5 BNS-OD-FC002/A4 Specific Lighting LTW-M670ZVS-M5 8. User Guide 8.1 Cleaning Do not use unspecified chemical liquid to clean LED they could harm the package. If cleaning is necessary, immerse the LED in ethyl alcohol or isopropyl alcohol at normal temperature for less than one minute. 8.2 Recommend Printed Circuit Board Attachment Pad Infrared / vapor phase Reflow Soldering 8.3 Package Dimensions of Tape Note: All dimensions are in mm. 7/12 Part No. : LTW-M670ZVS-M5 BNS-OD-FC002/A4 Specific Lighting LTW-M670ZVS-M5 8.4 Package Dimensions of Reel Notes: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel-maximum 2000 pieces per reel. 3. Minimum packing quantity is 500 pieces. 4. The maximum number of consecutive missing lamps is two. 5. In accordance with EIA-481-1-B specifications. 8/12 Part No. : LTW-M670ZVS-M5 BNS-OD-FC002/A4 Specific Lighting LTW-M670ZVS-M5 9. CAUTIONS 9.1 Application The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications). Consult Liteon’s Sales in advance for information on applications in which exceptional reliability is required, particularly when the failure or malfunction of the LEDs may directly jeopardize l ife or health (such as in aviation, transportation, traffic control equipment, medical and life support systems and safety devices). 9.2 Storage This product is qualified as Moisture sensitive Level 4 per JEDEC J-STD-020 Precaution when handing this moisture sensitive product is important to ensure the reliability of the product. The package is sealed: The LEDs should be stored at 30°C or less and 90%RH or less. And the LEDs are limited to use within one year, while the LEDs is packed in moisture-proof package with the desiccants inside. The package is opened: The LEDs should be stored at 30°C or less and 60%RH or less. Moreover, the LEDs are limited to solder process within 72hrs. If the Humidity Indicator shows the pink color in 10% even higher or exceed the storage limiting time since opened, that we recommended to baking LEDs at 60°C at least 48hrs. To seal the remainder LEDs return to package, it’s recommended to be with workable desiccants in original package. 9.3 Cleaning Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary. 9.4 Soldering Recommended soldering conditions: Reflow soldering Soldering iron Pre-heat 120~150°C Temperature 300°C Max. Pre-heat time 120 sec. Max. Soldering time 3 sec. Max. Soldering Temp. Soldering time 260°C Max. (one time only) 30 sec. Max. 9.5 Potting LED can be used potting process and recommended potting conditions: 100°C Max. 3hrs Max. 9/12 Part No. : LTW-M670ZVS-M5 BNS-OD-FC002/A4 Specific Lighting LTW-M670ZVS-M5 9.6 Drive Method An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each LED as shown in Circuit A below. Circuit model A LED Circuit model B LED (A) Recommended circuit. (B) The brightness of each LED might appear different due to the differences in the I-V characteristics of those LEDs. 9.7 ESD (Electrostatic Discharge) Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage:  Use of a conductive wrist band or anti-Electrostatic glove when handling these LEDs.  All devices, equipment, and machinery must be properly grounded.  Work tables, storage racks, etc. should be properly grounded.  Use ion blower to neutralize the static charge which might have built up on surface of the LED’s plastic lens as a result of friction between LEDs during storage and handling. ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low forward voltage, or “ no lightup ” at low currents. To verify for ESD damage, check for “ lightup ” and Vf of the suspect LEDs at low currents. The Vf of “ good ” LEDs should be >2.0V@0.1mA for InGaN product 10/12 Part No. : LTW-M670ZVS-M5 BNS-OD-FC002/A4 Specific Lighting LTW-M670ZVS-M5 9.8 Reliability Test Number of Test Item Test Condition Reference Standard Note Damaged Thermal Shock -30℃ ~ 85℃ 100 cycles 0/30 1000 hrs. 0/30 1000 hrs. 0/30 Ta=25℃, IF=20mA 1000 hrs. 0/30 Ta=25℃, IF=30mA 500 hrs. 0/30 Ta=85℃, IF=5mA 500 hrs. 0/30 500 hrs. 0/30 1000 hrs. 0/30 30min. 30min. High Temperature Storage JEITA ED-4701 Ta=85℃ 300 307 JEITA ED-4701 200 201 Temperature Humidity Ta=60℃, RH=90% Storage Steady State JEITA ED-4701 100 103 Operating Life Condition 1 Steady State Operating Life Condition 2 Steady State Operating Life of High Temperature Steady State 60℃, RH=90% , Operating Life of High IF=15mA Humidity Heat Steady State Operating Life of low Ta=-30℃, IF=20mA Temperature 11/12 Part No. : LTW-M670ZVS-M5 BNS-OD-FC002/A4 Specific Lighting LTW-M670ZVS-M5 9.9 Others The appearance and specifications of the product may be modified for improvement without prior notice. 9.10 Suggested Checking List Training and Certification 1. Everyone working in a static-safe area is ESD-certified? 2. Training records kept and re-certification dates monitored? Static-Safe Workstation & Work Areas 1. Static-safe workstation or work-Areas have ESD signs? 2. All surfaces and objects at all static-safe workstation and within 1 ft measure less than 100V? 3. All ionizer activated, positioned towards the units? 4. Each work surface mats grounding is good? Personnel Grounding 1. Every person (including visitors) handling ESD sensitive (ESDS) items wear wrist strap, heel strap or conductive shoes wit h conductive flooring? 2. If conductive footwear used, conductive flooring also present where operator stand or walk? 3. Garments, hairs or anything closer than 1 ft to ESD items measure less than 100V*? 4. Every wrist strap or heel strap/conductive shoes checked daily and result r ecorded for all DLs? 5. All wrist strap or heel strap checkers calibration up to date? Note: *50V for Blue LED. Device Handling 1. Every ESDS items identified by EIA-471 labels on item or packaging? 2. All ESDS items completely inside properly closed static-shielding containers when not at static-safe workstation? 3. No static charge generators (e.g. plastics) inside shielding containers with ESDS items? 4. All flexible conductive and dissipative package materials inspected before reuse or recycle? Others 1. Audit result reported to entity ESD control coordinator? 2. Corrective action from previous audits completed? 3. Are audit records complete and on file? 12/12 Part No. : LTW-M670ZVS-M5 BNS-OD-FC002/A4