PA-1041-71IL-LF

規 格 書 Electrical Specification Model No： ：PA-1041-71 Product No:PA-1041-71TP-LF Description： ：12V 40W AC Adaptor Revision： ：A Issued Date： ：Apr,02. 2012 光寶科技股份有限公司 光寶科技股份有限公司 LITE-ON TECHNOLOGY CORP. 桃園縣大園鄉三石村三和路 3 巷 7 號（力信工業大樓） 7,Lane 3,San Ho Rd,San-Shin Village,Da-Yuan Hsiang,Taoyuan Hsien 337,Taiwan, R.O.C. Approved By Checked By X Prepared By Change Record DCN No REV Revision Description A Initial Product No：PA-1041-71TP-LF Page： 2 Revision：A Date Apr.02,2012 Date: Apr,02.2012 Contents 1. Description ........................................................................................................ 4 2. Electrical............................................................................................................ 4 2.1 2.2 2.3 2.4 Input Voltage ......................................................................................... 4 Input Frequency .................................................................................... 4 Input Current ......................................................................................... 4 Inrush Current ....................................................................................... 4 2.5 2.6 2.7 2.8 Hold-Up time ......................................................................................... 4 Input wattage......................................................................................... 4 Efficiency............................................................................................... 4 Safety Test ............................................................................................ 4 2.9 2.10 Output Voltage and Current................................................................... 5 Ripple and Noise................................................................................... 5 2.11 2.12 2.13 Over-Shoot and under-shoot................................................................. 5 Protection .............................................................................................. 5 LED Indication....................................................................................... 5 2.14 2.15 2.16 2.17 Rise time ............................................................................................... 5 Turn on delay time................................................................................. 5 Temperature Coeffience ........................................................................ 5 Transient Response .............................................................................. 6 3. Environment ...................................................................................................... 6 3.1 Temperature .......................................................................................... 6 3.2 Humidity ................................................................................................ 6 3.3 Altitude .................................................................................................. 6 4. EMC .................................................................................................................. 6 4.1 EMS ...................................................................................................... 6 4.2 EMI........................................................................................................ 7 5. Reliability........................................................................................................... 7 5.1 5.2 Life (E-cap.)........................................................................................... 7 M.T.B.F. ................................................................................................. 7 5.3 5.4 5.5 5.6 Temperature Rise.................................................................................. 7 Burn-in .................................................................................................. 7 Vibration Test ........................................................................................ 7 Drop-Test............................................................................................... 7 6. Mechanical ........................................................................................................ 7 Product No：PA-1041-71TP-LF Page： 3 Revision：A Date: Apr,02.2012 1. Description This product is a AC to DC power transfer device, it can provide for a 40W single dc output with constant voltage source. 2. Electrical 2.1 Input Voltage a. 100 - 240Vac Nominal. b. 90 - 264Vac Universal. 2.2 Input Frequency 47- 63Hz. 2.3 Input Current 1.2 A max. at 90Vac input & dc output full-loading. 2.4 Inrush Current Inrush peak current and Joule integral will be measured at different line voltage at high ambient temperture. Peak current is within specified limit and Joule integral well below fuse and bridge spec. 2.5 Hold-Up time 10msec min. at dc output full-loading and 115Vac input. 2.6 Input wattage Less than 0.1W at 230Vac input & no load condition. 2.7 Efficiency Average efficiency 85.3% minimum min. at 25%, 50%, 75% & 100% of full-loading and 115/230Vac input (After warm up 20 minutes). 2.8 Safety Test a. Leakage current less than 0.25 mA at 254Vac, 50Hz. b. Hi-Pot test : 4242 Vdc, 10mA, 1 – 3 Sec. between Primary to Secondary ground. c. Insulation resistance: at dc 500Vdc, 1 Sec. between Primary to Secondary circuit, IR shall >=20MΩ. Product No：PA-1041-71TP-LF Page： 4 Revision：A Date: Apr,02.2012 2.9 Output Voltage and Current Vout (V) Range (V) 12V 11.4 – 12.6 Iout (min., A) 0 Iout (max., A) Peak (10S, A) 3.33 X 2.10 Ripple and Noise Low frequency ripple ( < 100KHz ) =50mA/usec. 12.0 0.83 1.66 +/- 1.0 10 msec. >=50mA/usec. 12.0 1.66 3.33 +/- 1.0 10 msec. >=50mA/usec. 50% of duty cycle. 3. Environment 3.1 Temperature a. Operation : 0 to 40 ℃ b. Storage : -40 to 70 ℃ 3.2 Humidity a. Operation : 20 to 80% b. Storage : 10 to 90% 3.3 Altitude From sea level to 5000m (operation). 4. EMC 4.1 EMS Test Item ESD ESD RS Test Specification Contact +/- 8KV IEC Standards 61000-4-2 Air +/- 15KV 61000-4-2 FR: 26MHz-1.0GHz, 61000-4-3 Field Strength: 3V/M EFT +/- 1KV (DM) & +/- 2KV (CM) 61000-4-4 SURGE +/- 1KV (DM) & +/- 2KV (CM) 61000-4-5 CS DIPS 3V/M 61000-4-6 0% 250Cy, 70% 25 Cy, 0% 0.5Cy Product No：PA-1041-71TP-LF Page： 6 61000-4-11 Revision：A Date: Apr,02.2012 4.2 EMI Standards Specification FCC Part 15,class B VCCI Class B CISPR Part 22,class B The radiation shall be under 6dB when input 110/230Vac with dummy load(3.33A). The conduction shall be under 6dB when input 110/230Vac with dummy load(3.33A),after warm up 10 minutes. 5. Reliability 5.1 Life (E-cap.) 30,000 hours at DC output 80% rate load, AC 115/230 Vac input & ambient temperature 35℃. 5.2 M.T.B.F. 50,000 Power On Hours at 25℃. 5.3 Temperature Rise. Less than 45℃ ℃ at nominal AC input / DC output full-loading and environment temperature 25+/-1℃ on Top/Bottom of plastic case. 5.4 Burn-in 100% Burn-In with 80~100% full-loading & 35~45℃ Environment temperature. 5.5 Vibration Test a. Non operation vibration with shipping container shall be 2G'S peak/7-50Hz, 4G'S /50-500Hz, after test no abnormally to be found. b. Operation vibration shall be 0.5G'S peak/10-60Hz, 3 AXES, after test no abnormally to be noted. 5.6 Drop-Test Test height is 100cm, after drop test no function abonormally to be noted. 6. Mechanical 6.1 Plastic enclosure：PC material. 6.2 Physical Size：108.5 mm( L ) * 48 mm ( W ) * 30.5 mm ( H ). 6.3 DC cord: 1500 mm, 20 AWG wires. 6.4 Weight : 200g(+/-10%). Product No：PA-1041-71TP-LF Page： 7 Revision：A Date: Apr,02.2012