PA-1101-18S3

ClassⅡ100W LED Controlgear : PA-1101-18 Series Product Features • Universal AC Input • High Power Factor • Low Total Harmonic Distortion • Short Circuit / Open Circuit / Over Voltage / Over Temperature Protections • Suitable for Dry & Damp Location • Adjustable Output Current by Dimming Input • RoHS Compliant AC Input / DC Output • AC Input Voltage • AC Input Frequency • Max. Input Current @ 90Vac (50Hz) • Min. PF @ 120Vac (50Hz) / 140V Output • Min. PF @ 230Vac (50Hz) / 140V Output • Min. PF @ 277Vac (60Hz) / 79V Output • Max. THD @ 120~277Vac / Output at 55.3W • Min. Eff. @ 120 & 277Vac / 140V Output • Turn On Delay Time • DC Output Current • Line Regulation • Load Regulation • DC Output Voltage Range • Ripple Current • DC Output Isolation EMC 90 ~ 305Vac (100 ~ 277Vac) 47 ~ 63Hz (50~60Hz) 1.5A 0.96 0.95 0.9 20% 88% 20MΩ , 500Vdc • Complied with UL8750, 1st Edition • Complied with UL60950-1, 2nd Edition • Complied with CAN/CSA-C22.2 No.250.13-14 • Complied with CAN/CSA-C22.2 No.60950-1-07,2nd Edition • Complied with IEC 61347-2-13:2006(First Edition) • Complied with IEC 61347-1:2007(Second Edition) +A1:2010+A2:2012 • Support 2 in 1 Dimming Function • Resistor Dimming Range (10~100K) • Voltage Dimming Range (1~10V) • Resistor Dimming Reference Table Resistor Dimming 75KΩ ±1% Output Current 540mA ±10% Tolerance • Voltage Dimming Reference Table Voltage Dimming 7.7V Output Current 540mA ±10% Tolerance 48.7KΩ ±1% 350mA ±10% 5V 350mA ±10% Notes : (1) above definition is based on 25℃ ambient if not specified (2) this LED driver is designed and intended for operating with LED load only (3) MTBF evaluation is based on SR-332 method, 115Vac/60Hz, max load (4) to measure efficiency after burn-in 30 minutes with full output load (5) recommend to install the controlgear inside the enclosure www.liteon.com Revised on 2015.03.26 (S3) Ver. A ClassⅡ100W LED Controlgear : PA-1101-18 Series Performance Curves • Power Factor (PF / Output Power) • THD (THD / Output Power) PF PF 1.00 THD THD 25.00% 0.98 20.00% 0.96 15.00% 0.94 120Vac 0.92 240Vac 0.90 277Vac 0.88 120Vac 10.00% 277Vac 40.00% 43.57% 47.14% 50.71% 54.29% 57.86% 61.43% 65.00% 68.57% 72.14% 75.71% 79.29% 82.86% 86.43% 90.00% 93.57% 97.14% 100.00% Output Power(%) • Efficiency (Eff. / Output Power) Output Power(%) • Output Current Tolerance (Tolerance / Output Power) Efficiency Eff. 40.00% 43.57% 47.14% 50.71% 54.29% 57.86% 61.43% 65.00% 68.57% 72.14% 75.71% 79.29% 82.86% 86.43% 90.00% 93.57% 97.14% 100.00% 0.00% 0.86 Output Current Tolerance Tolerance 92.00% 5.00% 90.00% 3.00% 88.00% 1.00% 86.00% 120Vac 84.00% 240Vac -1.00% 82.00% 277Vac -3.00% 120Vac Output Power(%) 200mA 140V Output Voltage (V) 130 700mA 56V 325mA 56V PF>0.9、THD0.9 & THD0.9、THD0.9 & THD0.9 & THD0.9、THD