PA-1101-48SL

ClassⅡ 100W LED Controlgear : PA-1101-48 Series Product Features • Universal AC Input • High Power Factor • Low Total Harmonic Distortion • Short Circuit / Open Circuit / Over Voltage / Over Temperature Protections • Suitable for Dry & Damp Location • Adjustable Output Current by Dimming Input • RoHS Compliant AC Input / DC Output • AC Input Voltage • AC Input Frequency • Max. Input Current @ 110Vac (60Hz) • Min. PF @ 230Vac (50Hz) / 95V Output • Min. PF @ 230Vac (50Hz) / Output ≧66.5V(70%) • Min. PF @ 277Vac (60Hz) / Output ≧55W • Max. THD @ 120~277Vac / Output at 55W ~ 100W • Min. Eff. @ 220Vac / 95V Output • Turn On Delay Time • DC Output Current • Line Regulation • Load Regulation • DC Output Voltage Range • Ripple Current at 220Vac & 95V Output • DC Output Isolation EMC 100 ~ 305Vac (110 ~ 277Vac) 47 ~ 63Hz (50~60Hz) 1.4A 0.95 0.92 0.9 20% 88% 20MΩ , 500Vdc • Complied with UL8750, 1st Edition • Complied with UL60950-1, 2nd Edition • Complied with CAN/CSA-C22.2 No.60950-1-07,2nd Edition • Support 2 in 1 Dimming Function • Resistor Dimming Range (10~100K) • Voltage Dimming Range (1~10V) • Resistor Dimming Reference Table Resistor Dimming 63.4KΩ ±1% Output Current 700mA ±10% Tolerance • Voltage Dimming Reference Table Voltage Dimming 6.6V Output Current 700mA ±10% Tolerance 48.7KΩ ±1% 540mA ±10% 5V 530mA ±10% Notes : (1) above definition is based on 25℃ ambient if not specified (2) this LED driver is designed and intended for operating with LED load only (3) MTBF evaluation is based on SR-332 method, 115Vac/60Hz, max load (4) to measure efficiency after burn-in 30 minutes with full output load (5) recommend to install the controlgear inside the enclosure www.liteon.com Revised on 2015.04.01 (SL) Ver. C