PA-1400-46SL

ClassⅡ 42W LED Controlgear : PA-1400-46 Series Product Features • Universal AC Input • High Power Factor • Low Total Harmonic Distortion • Short Circuit / Open Circuit / Over Voltage / Over Temperature Protections • Suitable for Dry & Damp Location • Adjustable Output Current by Dimming Input • RoHS Compliant AC Input / DC Output • AC Input Voltage • AC Input Frequency • Max. Input Current @ 110Vac (60Hz) • Min. PF @ 230Vac (50Hz) / 60V Output • Min. PF @ 230Vac (50Hz) / 42V Output (70% load) • Min. PF @ 277Vac (60Hz) / Output > 25W • Max. THD @ 110~277Vac / Output > 25W • Min. Eff. @ 220Vac / 60V Output • Turn On Delay Time • DC Output Current • Line Regulation • Load Regulation • DC Output Voltage Range • Ripple Current • DC Output Isolation EMC 100 ~ 305Vac (110 ~ 277Vac) 47 ~ 63Hz (50~60Hz) 0.6A 0.95 0.92 0.9 20% 86% 20MΩ , 500Vdc • Complied with UL8750, 1st Edition • Complied with UL60950-1, 2nd Edition • Complied with CSA C22.2 • Complied with IEC 61347-2-13:2006 • Complied with IEC 61347-1(Second Edition):2007+A1:2010 • Complied with IEC 62384:2006(1 Edition) • Support 2 in 1 Dimming Function • Resistor Dimming Range (10~100K) • Voltage Dimming Range (1~10V) • Resistor Dimming Reference Table Resistor Dimming 75KΩ ±1% Output Current 540mA ±10% Tolerance • Voltage Dimming Reference Table Voltage Dimming 7.7V Output Current 540mA ±10% Tolerance 48.7KΩ ±1% 350mA ±10% 5V 355mA ±10% Notes : (1) above definition is based on 25℃ ambient if not specified (2) this LED driver is designed and intended for operating with LED load only (3) MTBF evaluation is based on SR-332 method, 115Vac/60Hz, max load (4) to measure efficiency after burn-in 30 minutes with full output load (5) recommend to install the controlgear inside the enclosure www.liteon.com Revised on 2015.03.25 (SL) Ver. C ClassⅡ 42W LED Controlgear : PA-1400-46 Series Performance Curves • Power Factor (PF / Output Power) • THD (THD / Output Power) PF PF 1.00 0.99 0.98 0.97 0.96 0.95 0.94 0.93 0.92 0.91 0.90 THD THD 14.00% 12.00% 10.00% 120Vac 240Vac 277Vac 8.00% 120Vac 6.00% 240Vac 4.00% 277Vac 2.00% 0.00% Output Power(%) Output Power(%) • Efficiency (Eff. / Output Power) • Output Current Tolerance (Tolerance / Output Power) Efficiency Eff. Tolerance 90.00% 89.00% 88.00% 87.00% 86.00% 85.00% 84.00% 83.00% 82.00% Output Current Tolerance 5.00% 3.00% 1.00% 120Vac 120Vac 240Vac -1.00% 277Vac -3.00% 240Vac 277Vac -5.00% Output Power(%) • PF>0.9 & THD0.9 & THD0.9、THD0.9、THD0.9 & THD0.9、THD