PA-1600-31SL-LF

ClassⅡ 63W LED Controlgear : PA-1600-31 Series Product Features • Universal AC Input • High Power Factor • Low Total Harmonic Distortion • Short Circuit / Open Circuit / Over Voltage / Over Temperature Protections • Suitable for Dry & Damp Location • Adjustable Output Current by Dimming Input • RoHS Compliant AC Input / DC Output • AC Input Voltage • AC Input Frequency • Max. Input Current @ 110Vac (60Hz) • Min. PF @ 230Vac (50Hz) / 90V Output • Min. PF @ 230Vac (50Hz) / 63V Output (70% load) • Min. PF @ 277Vac (60Hz) / Output > 27W • Max. THD @ 110~277Vac / Output > 27W • Min. Eff. @ 220Vac (50Hz) / 90V Output • Turn On Delay Time • DC Output Current • Line Regulation • Load Regulation • DC Output Voltage Range • Ripple Current • DC Output Isolation EMC 100 ~ 305Vac (110 ~ 277Vac) 47 ~ 63Hz (50~60Hz) 1.0A 0.95 0.92 0.9 20% 90% 20MΩ , 500Vdc • Complied with UL8750, 1st Edition • Complied with UL60950-1, 2nd Edition • Complied with CSA C22.2 • Complied with IEC 61347-2-13:2006 • Complied with IEC 61347-1(Second Edition):2007+A1:2010 • Complied with IEC 62384:2006(1 Edition) • Support 2 in 1 Dimming Function • Resistor Dimming Range (10~100K) • Voltage Dimming Range (1~10V) • Resistor Dimming Reference Table Resistor Dimming 75KΩ ±1% Output Current 530mA ±10% Tolerance • Voltage Dimming Reference Table Voltage Dimming 7.5V Output Current 530mA ±10% Tolerance 43KΩ ±1% 330mA ±10% 5V 350mA ±10% Notes : (1) above definition is based on 25℃ ambient if not specified (2) this LED driver is designed and intended for operating with LED load only (3) MTBF evaluation is based on SR-332 method, 115Vac/60Hz, max load (4) to measure efficiency after burn-in 30 minutes with full output load (5) recommend to install the controlgear inside the enclosure www.liteon.com Revised on 2015.03.26 (SL) Ver. G ClassⅡ 63W LED Controlgear : PA-1600-31 Series Performance Curves • Power Factor (PF / Output Power) • THD (THD / Output Power) PF PF 1.00 THD THD 0.98 0.96 0.94 120Vac 0.92 240Vac 0.90 277Vac 0.88 0.86 20.00% 18.00% 16.00% 14.00% 12.00% 10.00% 8.00% 6.00% 4.00% 2.00% 0.00% 120Vac 240Vac 277Vac Output power(%) Output power(%) • Efficiency (Eff. / Output Power) • Output Current Tolerance (Tolerance / Output Power) Efficiency Eff. Output Current Tolerance Tolerance 92.00% 5.00% 90.00% 3.00% 88.00% 1.00% 86.00% 120Vac 84.00% 240Vac -1.00% 82.00% 277Vac -3.00% 80.00% 120Vac 240Vac 277Vac -5.00% Output power(%) Output power(%) • PF>0.9 & THD0.9 & THD0.9、THD0.9、THD0.9 & THD0.9、THD